Important compatibility info
Weight | 1.68 kg |
Additional Information | with nuts |
Rod/Strut | Push Rod |
Function | Centre Rod Assembly |
Type | Centre Rod Assembly |
Adjustable | Adjustable |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Seal Material | Rubber |
Number of Wings | 7 |
Type | Water Pump, engine cooling |
Weight | 0.880 kg |
Number of Teeth | 20 |
Function | Water Pump, engine cooling |
Water pump impeller material | Metal |
Additional Information 2 | with seal ring |
Material | Cast Aluminium |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 50 mm |
Length | 109 mm |
Function | Repair Kit, kingpin |
Weight | 1.722 kg |
Placement on Vehicle | Upper Front Axle, both sides |
Extra Description | ProKit |
Type | Repair Kit, kingpin |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Kingpin (05870)
- 1x Febi Bush, kingpin (05871)
- 1x Febi Seal Ring, steering knuckle (05872)
- 1x Febi Screw Plug, oil sump (05410)
- 1x Febi Seal Ring, steering knuckle (03028)
- 1x Febi Spacer, kingpin (05873)
- 1x Febi Circlip (04561)
Important compatibility info
Function | Joint Kit, drive shaft |
Type | Joint Kit, drive shaft |
Weight | 3.038 kg |
Internal Teeth, wheel side | 36 |
External Teeth, Wheel Side | 30 |
Thread Size | M22x1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Width | 26 mm |
Outer diameter | 140 mm |
Inner diameter | 80 mm |
Bearing Type | Ball Bearing |
Function | Bearing, manual transmission |
Weight | 1.34 kg |
Type | Bearing, manual transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Voltage from | 12 V |
Voltage to | 24 V |
Function | Tail Light Assembly |
Temperature range to | 65 °C |
Type | Tail Light Assembly |
Fulfils ECE norm | R148, R10 |
Temperature range from | -40 °C |
Placement on Vehicle | Left, Right |
Height | 140 mm |
Width | 140 mm |
Inspection Tag | D,ADR |
Light Function | with indicator (LED), with stop light (LED), with taillight (LED), without number plate light |
Weight | 0.452 kg |
Shape/Form | round |
Mounting Type | Fully assembled |
Depth | 86 mm |
Distance of fastening bolts | 45 mm |
Protection Type (IP Code) | IP6K9K |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Connectors / Ports | 5 |
Current Strength | 29 A |
Weight | 0.160 kg |
Function | Control Unit, air conditioning |
Extra Description | febi Plus |
Type | Control Unit, air conditioning |
Replaces | 31966 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle |
Length | 361 mm |
Function | Suspension Spring |
Wire Diameter | 14 mm |
Outer diameter | 64 mm |
Type | Suspension Spring |
Number of Coils | 6.5 |
Weight | 3.1 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.508 kg |
Type | Mounting Kit, charger |
Function | Mounting Kit, charger |
for OE number | 1100768 S2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Spanner Size | 22 |
Weight | 0.081 kg |
Cable Length | 350 mm |
Number of circuits | 4 |
Lambda Sensor | Heated |
Type | Oxygen Sensor |
Function | Oxygen Sensor |
External Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Width | 40 mm |
Outer diameter | 63 mm |
Type | Alternator Freewheel Clutch |
Function | Alternator Freewheel Clutch |
Weight | 0.514 kg |
Number of Ribs | 6 |
Additional Information 2 | with lid |
Inner diameter | 17 mm |
Placement on Vehicle | engine sided |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.187 kg |
Placement on Vehicle | Front Axle Left |
Paired article numbers | 107746 |
Number of Connectors / Ports | 2 |
Cable Length | 1030 mm |
Function | Sensor, wheel speed |
Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Cable Length | 570 mm |
Number of circuits | 8 |
Function | Cable Repair Set, boot lid |
Extra Description | febi Plus |
Type | Cable Repair Set, boot lid |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Steering arm type | Control Arm |
Paired article numbers | 38255 |
Function | Control/Trailing Arm, wheel suspension |
Material | Sheet Steel |
Weight | 2.28 kg |
Placement on Vehicle | Rear Axle Right |
Extra Description | ProKit |
Type | Control/Trailing Arm, wheel suspension |
Additional Information | with fastening/mounting material |
Additional Information 2 | with ball joint, with bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (23953)
- 1x Febi Mounting and Bolting Kit, control/trailing arm (38253)
Important compatibility info
External Thread Size | M14 x 1,5 |
Weight | 2.09 kg |
Length | 2650 mm |
Outer diameter | 8.5 mm |
Inner diameter | 4 mm |
Pressure | 400 bar |
Function | Hose Line, driver cab tilting device |
Type | Hose Line, driver cab tilting device |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Gasket Set, cylinder head cover |
Weight | 0.14 kg |
Material | MVQ (silicone rubber) |
Function | Gasket Set, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.396 kg |
Width | 28.5 mm |
Outer diameter | 62 mm |
Function | Tensioner Pulley, timing belt |
Type | Tensioner Pulley, timing belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Height | 28 mm |
Width | 133 mm |
Colour | Orange |
Rated Power | 18 W |
Cable Length | 1500 mm |
Voltage from | 9 V |
Number of circuits | 4 |
Voltage to | 30 V |
Protection Type (IP Code) | IP67 |
Fulfils ECE norm | R65, R10 |
Housing material | Aluminium |
Temperature range from | -40 °C |
Temperature range to | 65 °C |
Function | Strobe-type Beacon |
Weight | 0.180 kg |
Inspection Tag | EMC, SAE |
Light Design | LED |
Depth | 17 mm |
Type | Strobe-type Beacon |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Dust Cover Kit, shock absorber |
Function | Dust Cover Kit, shock absorber |
Placement on Vehicle | Front Axle |
Weight | 0.543 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Brake Caliper |
Placement on Vehicle | Rear Axle Left |
Material | Cast Iron |
Brake Caliper Type | Brake Caliper (1 piston) |
Paired article numbers | 178137 |
Weight | 2.52 kg |
Function | Brake Caliper |
Brake caliper piston diameter | 38 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Brake Caliper |
Placement on Vehicle | Rear Axle Right |
Material | Cast Iron |
Brake Caliper Type | Brake Caliper (1 piston) |
Paired article numbers | 178136 |
Weight | 2.52 kg |
Function | Brake Caliper |
Brake caliper piston diameter | 38 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Wheel Side, Front Axle Left, Front Axle Right |
Thread Size | M16x1,5 |
External Teeth, Wheel Side | 42 |
Internal Teeth, wheel side | 29 |
Weight | 2.864 kg |
Type | Joint Kit, drive shaft |
Function | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle |
Length | 317 mm |
Weight | 2.404 kg |
Outer diameter 1 | 77 mm |
Outer diameter 2 | 81 mm |
Type | Suspension Spring |
Function | Suspension Spring |
Wire Diameter | 14.3 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Plastic |
Colour | Black |
Number of Connectors / Ports | 4. 6. 5. 2 |
Weight | 0.132 kg |
Type | Clock Spring, airbag |
Function | Clock Spring, airbag |
Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.52 kg |
Function | Timing Belt Kit |
Width | 17 mm |
Number of Teeth | 111 |
Belts | with rounded tooth profile |
Additional Information 2 | with screw |
Type | Timing Belt Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt (14114)
- 1x Febi Tensioner Pulley, timing belt (06971)
Important compatibility info
Stroke | 240 mm |
Weight | 0.290 kg |
Function | Gas Spring, bonnet |
Housing length | 331.5 mm |
Eject Force | 250 N |
Paired article numbers | 103850 |
Housing Diameter | 18 mm |
Piston conrod diameter | 8 mm |
Mounting points diameter | 18 mm |
Length | 619 mm |
Placement on Vehicle | Left |
Type | Gas Spring, bonnet |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Cast Aluminium |
Water pump impeller material | Plastic |
Seal Material | Rubber/Metal |
Function | Water Pump, engine cooling |
Number of Wings | 6 |
Additional Information | with gasket/seal |
Weight | 0.69 kg |
Type | Water Pump, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.1 kg |
Placement on Vehicle | Front Axle |
Length | 156.4 mm |
Width | 74.2 mm |
Wear Warning Contact | excl. wear warning contact |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 20.3 mm. 19.5 mm |
Function | Brake Pad Set, disc brake |
Type | Brake Pad Set, disc brake |
Replaces | 16314; 16322 |
Additional Information 2 | with piston clip |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Voltage | 11 V |
Spanner Size | 12 |
Weight | 0.025 kg |
Fitting Depth | 22 mm |
External Thread Size | M10 x 1,25 |
Function | Glow Plug |
Type | Glow Plug |
Glow Plug Type | after-glow capable |
Length | 88.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.7 kg |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Length | 221 mm |
Width | 50 mm |
Material | Rubber/Metal |
Outer diameter | 50 mm |
Thickness | 49 mm |
Type | Mounting, control/trailing arm |
Function | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 3.180 kg |
Width | 74.7 mm |
Length | 206 mm |
Wear Warning Contact | with acoustic wear warning |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 20 mm |
Function | Brake Pad Set, disc brake |
Placement on Vehicle | Rear Axle, Front Axle |
Type | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Parts Set, maintenance service |
Weight | 1.218 kg |
Type | Parts Set, maintenance service |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Oil Filter (22532)
- 1x Febi Air Filter (21110)
- 1x Febi Filter, cabin air (09446)
- 1x Febi Fuel filter (24073)
- 1x Febi Screw Plug, oil sump (15322)
- 1x Febi Seal Ring, oil screen (06435)
- 4x Febi Spark Plug (13533)
Important compatibility info
Weight | 1.46 kg |
Placement on Vehicle | Right |
Bearing/Mounting Type | Rubber-Metal Mount |
Type | Mounting, engine |
Function | Mounting, engine |
for OE number | 46809632 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.275 kg |
Type | Brake Hose |
Paired article numbers | 185025 |
Function | Brake Hose |
External Thread Size | M10 x 1 |
Internal Thread Size | M10 x 1 |
Length | 338 mm |
Placement on Vehicle | Rear Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.47 kg |
Number of Teeth | 58 |
Function | Timing Belt Kit |
Width | 17 mm |
Type | Timing Belt Kit |
Belts | with rounded tooth profile |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt (21768)
- 1x Febi Tensioner Pulley, timing belt (15888)
Important compatibility info
Function | Brake Pad Set, disc brake |
Thickness/Strength 1 | 17.4 mm |
Inspection Tag | ECE R90 Approved |
Wear Warning Contact | prepared for wear warning indicator |
Width | 67 mm |
Length | 131.7 mm |
Placement on Vehicle | Rear Axle |
Weight | 1.880 kg |
Type | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle |
Weight | 1.07 kg |
Function | Repair Kit, suspension strut support mount |
Material | Rubber/Metal |
Type | Repair Kit, suspension strut support mount |
Additional Information 2 | with ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension Strut Support Mount (31424)
Important compatibility info
External Thread Size | M12 x 1,5 |
for OE number | 96 766 438 80 |
Weight | 0.043 kg |
Number of Connectors / Ports | 3 |
Type | Sensor, fuel pressure |
Function | Sensor, fuel pressure |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 161 mm |
Placement on Vehicle | Wheel Side |
Outer diameter | 89 mm |
External Teeth, Wheel Side | 29 |
Seal Diameter | 56 mm |
Internal Teeth, wheel side | 35 |
Weight | 2.450 kg |
Type | Joint Kit, drive shaft |
Function | Joint Kit, drive shaft |
External Thread Size | M24 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.81 kg |
Function | Water Pump, engine cooling |
Water pump impeller material | Plastic |
Number of Wings | 8 |
Number of Teeth | 23 |
Material | Cast Aluminium |
Seal Material | Rubber |
Type | Water Pump, engine cooling |
Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Exhaust Valve |
Valve stem diameter | 9.20 mm |
Length | 247 mm |
Function | Exhaust Valve |
Valve head diameter | 43.15 mm |
Weight | 0.203 kg |
Notches / Holes Number | 1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Wear Warning Contact | prepared for wear warning indicator |
Function | Brake Pad Set, disc brake |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 16.6 mm |
Width | 75.5 mm |
Placement on Vehicle | Rear Axle |
Weight | 1.847 kg |
Length | 130.5 mm |
Type | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | with oil sump gasket |
Weight | 0.451 kg |
Length | 231 mm |
Height | 142 mm |
Width | 195 mm |
Function | Hydraulic Filter Kit, automatic transmission |
Type | Hydraulic Filter Kit, automatic transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.02 kg |
Length | 45.8 mm |
Number of Connectors / Ports | 3 |
Type | Sensor, camshaft position |
Function | Sensor, camshaft position |
Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | with spacer plate |
Weight | 0.415 kg |
Length | 115.5 mm |
Height | 22.5 mm |
Width | 115.5 mm |
Type | Seal Kit, multi-valve |
Function | Seal Kit, multi-valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.804 kg |
Placement on Vehicle | Front Axle |
Length | 129.8 mm |
Width | 63.8 mm |
Wear Warning Contact | excl. wear warning contact |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 19 mm |
Function | Brake Pad Set, disc brake |
Type | Brake Pad Set, disc brake |
Additional Information 2 | with bolts/screws |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Left, Upper |
Weight | 1.632 kg |
Bearing/Mounting Type | Rubber-Metal Mount |
Type | Mounting, manual transmission |
Function | Mounting, manual transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 32 mm |
Opening Temperature | 87 °C |
Function | Thermostat, coolant |
Weight | 0.28 kg |
Type | Thermostat, coolant |
Additional Information 2 | with seal ring |
Housing Type | with housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 3.288 kg |
Cone Size | 17.2 mm |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Placement on Vehicle | Front Axle Left |
Material | Sheet Steel |
Steering arm type | Control Arm |
Paired article numbers | 177843 |
Additional Information 2 | with ball joint |
External Thread Size | M12 x 1,25 |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Brake Caliper |
Placement on Vehicle | Rear Axle Right |
Material | Cast Aluminium |
Brake Caliper Type | Brake Caliper (1 piston) |
Paired article numbers | 178456 |
Weight | 2.1 kg |
Function | Brake Caliper |
Brake caliper piston diameter | 38 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023