Proud to be a UK-based company
Contact us
Important compatibility info
| Weight | 0.958 kg |
| Function | Parts Set, maintenance service |
| Type | Parts Set, maintenance service |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 4x Febi Spark Plug (13462)
- 1x Febi Oil Filter (38813)
- 1x Febi Screw Plug, oil sump (21096)
- 1x Febi Filter, cabin air (17553)
- 1x Febi Air Filter (12765)
£38.41
Important compatibility info
| Weight | 0.21 kg |
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 116 |
| Timing Chain Size | G44HCF |
| Function | Timing Chain |
| Type | Timing Chain |
| Additional Information 2 | Requires special tools for mounting |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£38.41
Important compatibility info
| Weight | 1.58 kg |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Width | 40.5 mm |
| Outer diameter | 85 mm |
| Inner diameter | 45 mm |
| Bearing Type | Angular Ball Bearing |
| Type | Wheel Bearing Kit |
| Function | Wheel Bearing Kit |
| Additional Information 2 | with integrated magnetic sensor ring |
| Additional Information | with drive shaft bolt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 4x Febi Axle Bolt, drive shaft (26511)
- 1x Febi Screw (29748)
- 1x Febi Cover Plate, dust-cover wheel bearing (29769)
- 1x Febi Wheel Bearing Kit (29843)
£38.41
Important compatibility info
| Weight | 0.242 kg |
| Housing length | 281 mm |
| Placement on Vehicle | both sides |
| Length | 514 mm |
| Eject Force | 490 N |
| Stroke | 204 mm |
| Housing Diameter | 18 mm |
| Piston conrod diameter | 8 mm |
| Function | Gas Spring, boot/cargo area |
| Type | Gas Spring, boot/cargo area |
| Mounting points diameter | 16.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£38.41
Important compatibility info
| Function | Mounting, engine |
| Weight | 1.702 kg |
| Placement on Vehicle | Lower |
| Type | Mounting, engine |
| Bearing/Mounting Type | Rubber-Metal Mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£38.41
Important compatibility info
| Placement on Vehicle | Rear |
| Length | 180 mm |
| Thickness | 127 mm |
| Additional Information 2 | with ball bearing |
| Inner diameter | 54 mm |
| Weight | 0.731 kg |
| Bearing Type | Ball Bearing |
| Type | Suspension, propshaft |
| Function | Suspension, propshaft |
| Hole Spacing | 148 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension, propshaft (170231)
- 1x Febi Bearing, propshaft centre bearing (05362)
£38.41
Important compatibility info
| Function | Mounting, engine |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Placement on Vehicle | Left Front |
| Weight | 1.018 kg |
| Type | Mounting, engine |
| for OE number | 56 84 048 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£38.41
Important compatibility info
| Weight | 0.903 kg |
| Placement on Vehicle | Front Axle |
| Material | Rubber/Metal |
| Type | Repair Kit, suspension strut support mount |
| Function | Repair Kit, suspension strut support mount |
| Additional Information 2 | with ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£38.41
Important compatibility info
| Weight | 0.069 kg |
| Number of Connectors / Ports | 2 |
| Function | Sensor, wheel speed |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 1307 mm |
| Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£38.41
Important compatibility info
| Weight | 0.455 kg |
| Additional Information 2 | Requires special tools for mounting |
| Placement on Vehicle | Lower |
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 104 |
| Timing Chain Size | G68VCO, G68V-1 |
| Function | Timing Chain |
| Type | Timing Chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£38.41
Important compatibility info
| Length | 141 mm |
| Thickness | 38 mm |
| Function | Cylinder Head, air compressor |
| Weight | 0.895 kg |
| Width | 130 mm |
| Type | Cylinder Head, air compressor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£38.41
Important compatibility info
| Weight | 1.400 kg |
| Function | Mounting, engine |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Placement on Vehicle | Right |
| Type | Mounting, engine |
| for OE number | 51757887 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£38.41
Important compatibility info
| Weight | 0.501 kg |
| Function | Timing Chain |
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 100 |
| Timing Chain Size | G67HP, G67HR |
| Additional Information 2 | Requires special tools for mounting |
| Type | Timing Chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£38.41
Important compatibility info
| Weight | 0.038 kg |
| Number of Connectors / Ports | 2 |
| Length | 615 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Function | Sensor, wheel speed |
| Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£38.41
Important compatibility info
| Additional Information 2 | Requires special tools for mounting |
| Function | Timing Chain |
| Timing Chain Size | G67HP, G67HR, G67AM |
| Number of Chain Links | 66 |
| Chain Type | Simplex, Closed chain |
| Placement on Vehicle | Lower |
| Type | Timing Chain |
| Weight | 0.33 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£38.41
Important compatibility info
| Weight | 0.155 kg |
| Number of Connectors / Ports | 11 |
| Combi Switch Function | with indicator function, with high beam function, with klaxon, with hazard warning light function |
| Function | Steering Column Switch |
| Type | Steering Column Switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£38.41
Important compatibility info
| Length | 75 mm |
| Outer diameter | 39.8 mm. 46 mm |
| Spanner Size | 19 |
| Thread Length | 12 mm |
| Number of Connectors / Ports | 2 |
| Control Range | 0,25+0,15 bar |
| Function | Sensor, oil pressure |
| Switch point to | 5 bar |
| for OE number | 001 542 56 17 |
| Weight | 0.116 kg |
| External Thread Size | M14 x 1,5 |
| Type | Sensor, oil pressure |
| Switch | with alarm switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£38.41
Important compatibility info
| Weight | 0.195 kg |
| Width | 19.4 mm |
| Outer diameter | 64 mm |
| Function | Tensioner Pulley, timing belt |
| Type | Tensioner Pulley, timing belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£38.41
Important compatibility info
| Outer diameter | 35 mm |
| Number of Holes | 4 |
| Bolt Hole Circle Diameter | 100 mm |
| Weight | 1.545 kg |
| Placement on Vehicle | Front Axle |
| Function | Wheel Hub |
| Type | Wheel Hub |
| Additional Information 2 | without wheel bearing, with ABS sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£38.41
Important compatibility info
| Function | Fan Wheel, engine cooling |
| Number of Wings | 9 |
| Outer diameter | 460 mm |
| Type | Fan Wheel, engine cooling |
| Weight | 0.627 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£38.42
Important compatibility info
| Weight | 1.55 kg |
| Placement on Vehicle | Front Axle Left, Lower, Front, Front Axle Right |
| Material | Aluminium |
| Steering arm type | Control Arm |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£38.43
Important compatibility info
| Function | Deflection/Guide Pulley, v-ribbed belt |
| Outer diameter | 60 mm |
| Material | Plastic |
| Width of castor bearing surface | 26 mm |
| Weight | 0.115 kg |
| Type | Deflection/Guide Pulley, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£38.44
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Length | 606 mm |
| Number of Connectors / Ports | 2 |
| Weight | 0.030 kg |
| Type | Sensor, wheel speed |
| Function | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£38.44
Important compatibility info
| Function | Sensor, wheel speed |
| Type | Sensor, wheel speed |
| Cable Length | 980 mm |
| Weight | 0.051 kg |
| Number of Connectors / Ports | 2 |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£38.44
Important compatibility info
| Paired article numbers | 178865 |
| Placement on Vehicle | Left Rear |
| Length | 1838 mm |
| Weight | 0.85 kg |
| Type | Cable Pull, parking brake |
| Function | Cable Pull, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£38.44
Important compatibility info
| Extra Description | febi Plus |
| External Thread Size | M10 x 1,25 |
| Length | 394 mm |
| Wet Sump Material | Sheet Steel |
| Colour | Black |
| Weight | 1.38 kg |
| Type | Oil sump |
| Function | Oil sump |
| Additional Information 2 | with seal ring |
| Additional Information | with oil drain plug |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£38.45
Important compatibility info
| Weight | 2.726 kg |
| External Teeth, Wheel Side | 28 |
| Internal Teeth, wheel side | 39 |
| Type | Joint Kit, drive shaft |
| Function | Joint Kit, drive shaft |
| Thread Size | M24x1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow Kit, drive shaft (171897)
- 1x Febi Split Pin (02877)
- 1x Febi Nut, kingpin (45450)
£38.45
Important compatibility info
| Water pump impeller material | Plastic |
| Seal Material | Rubber |
| Material | Cast Aluminium |
| Number of Wings | 6 |
| Function | Water Pump, engine cooling |
| Weight | 1.09 kg |
| Type | Water Pump, engine cooling |
| Additional Information 2 | with seal ring |
| for OE number | 46338675 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£38.45
Important compatibility info
| Pipe Diameter | 64.5 mm. 42.5 mm |
| Mounting points diameter | 14 mm |
| Piston conrod diameter | 12 mm |
| Function | Shock Absorber, driver cab suspension |
| Max. Length | 337 mm |
| Min. Length | 228 mm |
| Weight | 1.924 kg |
| Shock Absorber Mounting Type | Top pin, Bottom eye |
| Placement on Vehicle | Left Front, Right Front |
| Operating Mode | Mechanical |
| Type | Shock Absorber, driver cab suspension |
| External Thread Size | M12 x 1,75 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£38.45
Important compatibility info
| Weight | 0.471 kg |
| Material | MVQ (silicone rubber) |
| Outer diameter | 94 mm |
| Inner diameter | 88 mm |
| Function | Charge Air Hose |
| Colour | Blue |
| Type | Charge Air Hose |
| Hose Length | 310 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£38.45
Important compatibility info
| Extra Description | febi Plus |
| Length | 401 mm |
| Spanner Size | 22, T45 |
| Type | Oil sump |
| Function | Oil sump |
| Weight | 1.72 kg |
| External Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£38.45
Important compatibility info
| Width of castor bearing surface | 23 mm |
| Function | Deflection/Guide Pulley, v-ribbed belt |
| Type | Deflection/Guide Pulley, v-ribbed belt |
| Mounting points diameter | 12 mm |
| Weight | 0.933 kg |
| Inner diameter | 10 mm |
| Outer diameter | 120 mm |
| Material | Metal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£38.45
Important compatibility info
| Weight | 1.036 kg |
| Inner Length | 726 mm |
| Outer Length | 917 mm |
| Type | Cable Pull, clutch control |
| Function | Cable Pull, clutch control |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£38.45
Important compatibility info
| Weight | 1.78 kg |
| Length | 125 mm |
| Width | 68 mm |
| Thickness | 126 mm |
| Thread Type | with left-hand thread |
| Cone Size | 27 mm |
| Function | Angled Ball Joint, steering push rod |
| External Thread Size | M30 x 1,5, M24 x 1,5 |
| Type | Angled Ball Joint, steering push rod |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£38.45
Important compatibility info
| External Thread Size | M18 x 1,5 |
| Weight | 2.0 kg |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 275 mm |
| Rod/Strut | Coupling Rod |
| Cone Size | 22 mm |
| Pipe Diameter | 30 mm |
| Type | Link/Coupling Rod, stabiliser bar |
| Function | Link/Coupling Rod, stabiliser bar |
| Extra Description | ProKit |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£38.45
Important compatibility info
| Function | Ball Joint |
| External Thread Size | M14 x 1,5, M12 x 1,25 |
| Paired article numbers | 43025 |
| Placement on Vehicle | Front Axle Right, Lower |
| Weight | 1.24 kg |
| Additional Information 2 | with crown nut |
| Steering arm type | for control arm |
| Cone Size | 14 mm |
| Mounting points diameter | 14.5 mm |
| Type | Ball Joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£38.45
Important compatibility info
| Weight | 1.47 kg |
| External Thread Size | M12 x 1,75 |
| Placement on Vehicle | Rear |
| Operating Mode | Mechanical |
| Shock Absorber Mounting Type | Top pin, Bottom eye |
| Max. Length | 331 mm |
| Min. Length | 238 mm |
| Pipe Diameter | 44 mm. 54 mm |
| Mounting points diameter | 14 mm |
| Piston conrod diameter | 13 mm |
| Type | Shock Absorber, driver cab suspension |
| Function | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£38.45
Important compatibility info
| Operating Mode | Automatic |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Weight | 0.7 kg |
| Type | Belt Tensioner, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£38.45
Important compatibility info
| Type | Expansion Tank, coolant |
| Function | Expansion Tank, coolant |
| Weight | 0.815 kg |
| for OE number | 1340758080 SK |
| Material | Plastic |
| Additional Information 2 | without lid |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£38.45
Important compatibility info
| Material | Cast Aluminium |
| Weight | 0.580 kg |
| Number of Wings | 6 |
| Type | Water Pump, engine cooling |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Metal |
| Seal Material | Silicone |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£38.45
Important compatibility info
| Width | 30 mm |
| Number of Teeth | 112 |
| Surface | Coated |
| Belts | with trapezoidal tooth profile |
| Function | Timing Belt |
| Weight | 0.155 kg |
| Type | Timing Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£38.45
Important compatibility info
| Type | Hydraulic Filter Kit, automatic transmission |
| Function | Hydraulic Filter Kit, automatic transmission |
| Width | 84 mm |
| Height | 51 mm |
| Length | 205 mm |
| Weight | 0.158 kg |
| Additional Information 2 | with oil sump gasket |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£38.45
Important compatibility info
| Function | Pressure Limiting Valve |
| Internal Thread Size | M16 x 1,5 |
| Weight | 0.352 kg |
| Type | Pressure Limiting Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£38.45
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 241 mm |
| Material | Steel |
| Outer diameter | 13 mm |
| Spanner Size | 17 |
| Rod/Strut | Coupling Rod |
| External Thread Size | M10 x 1,5 |
| Function | Link/Coupling Rod, stabiliser bar |
| Colour | Black |
| Thread Length | 19 mm |
| Weight | 0.43 kg |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£38.45
Important compatibility info
| Spanner Size | 49 |
| Additional Information | with counter nut |
| External Thread Size | M22 x 1,5 |
| Type | Inner Tie Rod |
| Function | Inner Tie Rod |
| Extra Description | ProKit |
| Weight | 1.535 kg |
| Length | 207 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£38.45
Important compatibility info
| Weight | 0.97 kg |
| Core Width | 176 mm |
| Core Depth | 42 mm |
| Type | Heat Exchanger, interior heating |
| Function | Heat Exchanger, interior heating |
| Core Length | 295 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£38.45
Important compatibility info
| Type | Joint Kit, drive shaft |
| Weight | 2.170 kg |
| Function | Joint Kit, drive shaft |
| Internal Teeth, wheel side | 25 |
| External Teeth, Wheel Side | 42 |
| Thread Size | M16x1,5 |
| Placement on Vehicle | Wheel Side, Front Axle Left, Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£38.45
Important compatibility info
| Function | Repair Kit, brake camshaft |
| Type | Repair Kit, brake camshaft |
| Weight | 0.332 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Bearing, brake camshaft (19002)
- 2x Febi Shaft Seal, brake camshaft (19003)
- 1x Febi Circlip, brake shaft (07493)
- 1x Febi Spacer, brake shaft (07490)
- 1x Febi Spacer, brake shaft (07488)
- 1x Febi Spacer, brake shaft (07487)
- 1x Febi Stop Plate, adjuster (07484)
- 1x Febi Spacer, brake shaft (19004)
£38.45
Important compatibility info
| Mounting points diameter | 18 mm |
| Placement on Vehicle | both sides |
| Length | 522 mm |
| Housing Diameter | 19 mm |
| Weight | 0.2 kg |
| Stroke | 154 mm |
| Eject Force | 635 N |
| Housing length | 303 mm |
| Piston conrod diameter | 8 mm |
| Type | Gas Spring, boot/cargo area |
| Function | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£38.45
Important compatibility info
| Weight | 3.37 kg |
| Placement on Vehicle | Lower, Front Axle Right |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 37470 |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£38.45
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023