Important compatibility info
Spanner Size | 24 |
Internal Thread Size | M14 x 1,5 |
Type | Tie Rod End |
Function | Tie Rod End |
Length | 221 mm |
External Thread Size | M14 x 1,5 |
Placement on Vehicle | Front Axle Left |
Weight | 0.649 kg |
Paired article numbers | 183614 |
Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Fuel filter |
Filter type | In-Line Filter, with water drain screw |
Outer diameter | 79 mm |
Height | 179 mm |
Weight | 0.28 kg |
Type | Fuel filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.482 kg |
Material | Plastic |
Colour | Black |
Function | Bracket, expansion tank (coolant) |
Extra Description | febi Plus |
Type | Bracket, expansion tank (coolant) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Joint Kit, drive shaft |
Type | Joint Kit, drive shaft |
Weight | 1.650 kg |
Internal Teeth, wheel side | 20 |
Seal Diameter | 55.6 mm |
External Teeth, Wheel Side | 26 |
Outer diameter | 73 mm |
Placement on Vehicle | Wheel Side |
Length | 141 mm |
External Thread Size | M22 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.578 kg |
Placement on Vehicle | Rear Axle |
Width | 42 mm |
Outer diameter | 72 mm |
Inner diameter | 30 mm |
Bearing Type | Angular Ball Bearing |
Type | Wheel Bearing Kit |
Sealing lip material | NBR (nitrile butadiene rubber) |
Function | Wheel Bearing Kit |
Additional Information 2 | with grease cap |
Additional Information | with axle nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Wheel Bearing Kit (170375)
- 1x Febi Cap, wheel bearing (24232)
- 1x Febi Nut (24230)
- 1x Febi Bolt, brake disc (04511)
Important compatibility info
Material | Cast Steel |
Steering arm type | Control Arm |
Paired article numbers | 21455 |
Placement on Vehicle | Lower Front Axle, Right Rear |
Weight | 1.640 kg |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Cone Size 2 | 20 mm |
External Thread Size | M14 x 1,5 |
Additional Information 2 | with ball joint, with bearing |
Additional Information | with lock nut |
Cone Size | 15 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Mounting, control/trailing arm (02682)
Important compatibility info
Height | 475 mm |
Outer diameter | 265 mm |
Inner diameter | 170 mm |
Filter type | Filter Insert |
Function | Air Filter |
Weight | 3.14 kg |
Type | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.357 kg |
Material | Plastic |
Function | Bracket, expansion tank (coolant) |
Extra Description | febi Plus |
Type | Bracket, expansion tank (coolant) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Connectors / Ports | 2 |
Function | Sensor, wheel speed |
Type | Sensor, wheel speed |
Weight | 0.08 kg |
Cable Length | 1865 mm |
Placement on Vehicle | Rear Axle Right |
Paired article numbers | 179123 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Oil Cooler, engine oil |
Type | Oil Cooler, engine oil |
Weight | 0.318 kg |
Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.265 kg |
Length | 3730 mm |
Outer diameter | 8.5 mm |
Inner diameter | 4.2 mm |
Pressure | 400 bar |
Function | Hose Line, driver cab tilting device |
External Thread Size | M14 x 1,5 |
Type | Hose Line, driver cab tilting device |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Lower |
Steering arm type | Control Arm |
Paired article numbers | 29423 |
Material | Cast Steel |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Weight | 4.25 kg |
Additional Information 2 | with ball joint |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Right |
Additional Information | with lock nut |
Paired article numbers | 186570 |
Weight | 1.111 kg |
Type | Tie Rod |
Function | Tie Rod |
External Thread Size | M12 x 1,5, M16 x 1,5 |
Additional Information
Technical Information
After replacement, the optical driver assistance systems (cameras, radar, etc.) may need to be recalibrated. Please observe the manufacturer's instructions.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Tie Rod End (26097)
- 1x Febi Inner Tie Rod (185895)
Important compatibility info
Additional Information 2 | with heat shield |
Weight | 0.360 kg |
Width | 240 mm |
Material | Sheet Steel |
Inner diameter | 25 mm |
Function | Gasket, exhaust manifold |
Hole Spacing | 73 mm |
Type | Gasket, exhaust manifold |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
for OE number | 2N0 412 303 H S1 |
Type | Dust Cover Kit, shock absorber |
Function | Dust Cover Kit, shock absorber |
Placement on Vehicle | Front Axle |
Weight | 0.680 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Rubber Buffer, suspension (187821)
- 2x Febi Protective Cap/Bellow, shock absorber (109548)
Important compatibility info
Weight | 0.6 kg |
Material | Aluminium |
Steering arm type | Control Arm |
Placement on Vehicle | Front Axle Left, Upper, Front Axle Right |
Function | Control/Trailing Arm, wheel suspension |
Cone Size | 13 mm |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with ball joint, with rubber mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.155 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Steering arm type | Control Arm |
Material | Sheet Steel |
Function | Control/Trailing Arm, wheel suspension |
External Thread Size | M12 x 1,5 |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (38609)
- 1x Febi Nut, stabiliser bar (22264)
Important compatibility info
Paired article numbers | 12562 |
Function | Control/Trailing Arm, wheel suspension |
Weight | 2.515 kg |
Steering arm type | Control Arm |
Material | Cast Steel |
Placement on Vehicle | Upper Front Axle, Right |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with ball joint, without bearing |
Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.800 kg |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Width | 64.4 mm |
Outer diameter | 120 mm |
Inner diameter | 30 mm |
Number of Holes | 4 |
Bolt Hole Circle Diameter | 100 mm |
Bearing Type | Angular Ball Bearing |
Function | Wheel Bearing Kit |
Type | Wheel Bearing Kit |
Additional Information | with fastening/mounting material |
Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with ABS sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 70 mm |
Operating Mode | Automatic |
Housing material | Aluminium |
Function | Belt Tensioner, v-ribbed belt |
Track rollers material | Metal |
Width of castor bearing surface | 24 mm |
Type | Belt Tensioner, v-ribbed belt |
Weight | 0.787 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.5 kg |
Placement on Vehicle | Rear |
Operating Mode | Mechanical |
Shock Absorber Mounting Type | Top eye, Bottom Pin |
Mounting points diameter | 14 mm |
Type | Shock Absorber, driver cab suspension |
Function | Shock Absorber, driver cab suspension |
Max. Length | 337 mm |
Min. Length | 237 mm |
Pipe Diameter | 43 mm. 56 mm |
Piston conrod diameter | 13 mm |
External Thread Size | M12 x 1,75 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Steering arm type | Control Arm |
Paired article numbers | 29422 |
Placement on Vehicle | Front Axle Right, Lower |
Weight | 4.013 kg |
Material | Cast Steel |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with ball joint |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.056 kg |
Type | Oil Jet, piston underside cooling |
Function | Oil Jet, piston underside cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 215 mm |
Inner diameter | 177 mm |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Material | Steel |
Number of Teeth, ABS ring | 100 |
Function | Sensor Ring, ABS |
Weight | 1.17 kg |
Type | Sensor Ring, ABS |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.515 kg |
Steering arm type | Control Arm |
Material | Cast Steel |
Placement on Vehicle | Upper Front Axle, Left |
Paired article numbers | 12563 |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with ball joint, without bearing |
Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 158 mm |
Internal Teeth, wheel side | 25 |
Weight | 2.320 kg |
Number of Teeth, ABS ring | 46 |
Type | Joint Kit, drive shaft |
Function | Joint Kit, drive shaft |
External Thread Size | M22 x 1,5 |
Outer diameter | 87.5 mm |
External Teeth, Wheel Side | 27 |
Seal Diameter | 60 mm |
Placement on Vehicle | Wheel Side, Front Axle Left, Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Deflection/Guide Pulley, v-ribbed belt |
Outer diameter | 60 mm |
Material | Plastic |
Width of castor bearing surface | 26 mm |
Weight | 0.115 kg |
Type | Deflection/Guide Pulley, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
for OE number | 1 381 495 |
Number of mounting bores | 6 |
Mounting points diameter | 9 mm |
Function | Thermostat Housing |
Weight | 0.400 kg |
Type | Thermostat Housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Control/Trailing Arm, wheel suspension |
Material | Aluminium |
Paired article numbers | 174666 |
Placement on Vehicle | Lower, Front Axle Left |
Function | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with bearing |
Steering arm type | Control Arm |
Weight | 2.5 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.540 kg |
Bore Diameter | 19 mm |
Fill Medium | Brake Fluid |
Function | Master Cylinder, clutch |
Type | Master Cylinder, clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.820 kg |
Placement on Vehicle | Front Axle Right, Upper |
Material | Cast Steel |
Steering arm type | Control Arm |
Paired article numbers | 24417 |
Function | Control/Trailing Arm, wheel suspension |
External Thread Size | M12 x 1,25 |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Cooling Hose | from heat exchanger to engine |
Function | Radiator Hose |
Weight | 0.434 kg |
Type | Radiator Hose |
Additional Information 2 | with quick couplers |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.094 kg |
Placement on Vehicle | Rear Axle Left, Rear, Upper |
Material | Aluminium |
Steering arm type | Control Arm |
Paired article numbers | 46422 |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.438 kg |
Function | Dust Cover Kit, shock absorber |
Type | Dust Cover Kit, shock absorber |
Width | 59 mm |
Length | 87 mm |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Rubber Buffer, suspension (176337)
- 2x Febi Protective Cap/Bellow, shock absorber (175559)
Important compatibility info
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Cone Size | 18 mm |
Paired article numbers | 174283 |
Material | Sheet Steel |
Additional Information 2 | with ball joint |
Steering arm type | Control Arm |
Weight | 3.015 kg |
Placement on Vehicle | Front Axle Left, Lower |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle |
Length | 452 mm |
Weight | 2.6 kg |
Outer diameter | 168 mm |
Type | Suspension Spring |
Function | Suspension Spring |
Number of Coils | 5.8 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.750 kg |
Function | Repait Kit, spring bearing frame |
Type | Repait Kit, spring bearing frame |
Placement on Vehicle | Front Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Bush, spring eye (29569)
- 1x Febi Rubber Buffer, suspension (47033)
- 1x Febi Rubber Buffer, suspension (47127)
Important compatibility info
Voltage | 12 V |
Operating Mode | Electric-pneumatic |
Number of Connectors / Ports | 2 |
Weight | 0.20 kg |
Type | Pressure converter, turbocharger |
Function | Pressure converter, turbocharger |
Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Width | 32 mm |
Function | Deflection/Guide Pulley, V-ribbed belt |
Type | Deflection/Guide Pulley, V-ribbed belt |
Mounting points diameter | 10 mm |
Material | Metal |
Weight | 0.787 kg |
Width of castor bearing surface | 21 mm |
Outer diameter | 85 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Brake Caliper |
Type | Brake Caliper |
Weight | 3.289 kg |
Paired article numbers | 179091 |
Brake Caliper Type | Brake Caliper (1 piston) |
Material | Cast Iron |
Placement on Vehicle | Front Axle Left |
Brake caliper piston diameter | 57 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Brake Caliper |
Brake caliper piston diameter | 57 mm |
Placement on Vehicle | Front Axle Right |
Material | Cast Iron |
Brake Caliper Type | Brake Caliper (1 piston) |
Paired article numbers | 179090 |
Weight | 3.289 kg |
Function | Brake Caliper |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.317 kg |
Length | 133 mm |
Width | 127 mm |
Thickness | 26 mm |
Function | Seal Kit, multi-valve |
Additional Information 2 | with spacer plate |
Type | Seal Kit, multi-valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Water Pump, engine cooling |
Water pump impeller material | Metal |
Weight | 0.66 kg |
Seal Material | Paper |
Type | Water Pump, engine cooling |
Material | Cast Aluminium |
Additional Information 2 | with studs |
Additional Information | with gasket/seal |
Number of Wings | 6 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle |
Length | 235 mm |
Width | 105 mm |
Material | PU (Polyurethane) |
Weight | 0.588 kg |
for OE number | 2N0 412 303 K S1 |
Type | Dust Cover Kit, shock absorber |
Function | Dust Cover Kit, shock absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Protective Cap/Bellow, shock absorber (109548)
- 2x Febi Rubber Buffer, suspension (170027)
Important compatibility info
Weight | 0.310 kg |
Length | 110 mm |
Width | 100 mm |
Material | Aluminium |
Thickness | 30 mm |
Function | Oil Cooler, engine oil |
Type | Oil Cooler, engine oil |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Brake caliper piston diameter | 57 mm |
Weight | 3.415 kg |
Placement on Vehicle | Front Axle Left |
Material | Cast Iron |
Brake Caliper Type | Brake Caliper (1 piston) |
Paired article numbers | 181768 |
Function | Brake Caliper |
Type | Brake Caliper |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Brake Caliper |
Function | Brake Caliper |
Brake caliper piston diameter | 57 mm |
Brake Caliper Type | Brake Caliper (1 piston) |
Paired article numbers | 181767 |
Material | Cast Iron |
Placement on Vehicle | Front Axle Right |
Weight | 3.415 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Repair Kit, suspension strut support mount |
Placement on Vehicle | Front Axle Right |
Material | Rubber/Metal |
Additional Information 2 | with fastening material, with ball bearing |
Paired article numbers | 179630 |
Weight | 1.242 kg |
Type | Repair Kit, suspension strut support mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension Strut Support Mount (109345)
- 1x Febi Rolling Bearing, suspension strut support mount (27459)
- 1x Febi Nut (177961)
- 3x Febi Screw (175871)
Important compatibility info
Paired article numbers | 175502 |
Colour | Black |
Driver Position | for right-hand drive vehicles |
Weight | 0.27 kg |
Type | Exterior Door Handle |
Function | Exterior Door Handle |
Extra Description | febi Plus |
Placement on Vehicle | Sliding Door, Left |
Material | Plastic |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle |
Outer diameter | 256 mm |
Thickness | 39.4 mm |
Brake Disc Thickness | 13 mm |
Minimum thickness | 11 mm |
Bolt Hole Circle Diameter | 100 mm |
Centering Diameter | 65 mm |
Surface | Coated |
Number of mounting bores | 1 |
Function | Brake Disc |
Weight | 4.175 kg |
Rim Hole Number | 4 -Hole |
Rotor Style | Solid |
Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023