Important compatibility info
Weight | 5.356 kg |
Wear Warning Contact | prepared for wear warning indicator |
Function | Brake Pad Set, disc brake |
Length | 189.7 mm |
Thickness/Strength 1 | 17.6 mm |
Inspection Tag | ECE R90 Approved |
Width | 107.7 mm |
Placement on Vehicle | Front Axle |
Type | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.528 kg |
Type | Mounting Kit, charger |
Function | Mounting Kit, charger |
for OE number | 1 100 768 S3 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.880 kg |
Placement on Vehicle | Front Axle, Rear Axle, Lower |
Width | 72 mm |
Material | Rubber/Metal |
Outer diameter | 78 mm |
Steering arm type | for trailing arm |
Function | Repair Kit, control/trailing arm |
Internal Thread Size | M24 x 2 |
Type | Repair Kit, control/trailing arm |
Additional Information 2 | with retaining ring, with spacer disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear |
Length | 180 mm |
Thickness | 128 mm |
Additional Information 2 | with ball bearing |
Inner diameter | 54 mm |
Weight | 0.819 kg |
Bearing Type | Ball Bearing |
Type | Suspension, propshaft |
Function | Suspension, propshaft |
Hole Spacing | 148 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension, propshaft (170230)
- 1x Febi Bearing, propshaft centre bearing (05362)
Important compatibility info
Additional Information | with seal rings |
Weight | 0.528 kg |
Material | Aluminium |
Number of Ribs | 15 |
Type | Oil Cooler, automatic transmission |
Function | Oil Cooler, automatic transmission |
Transmission Type | Automatic Transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.56 kg |
Placement on Vehicle | Lower Right |
Function | Roller Guide, sliding door |
Extra Description | febi Plus |
Type | Roller Guide, sliding door |
Paired article numbers | 197668 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle |
Outer diameter | 284 mm |
Thickness | 61 mm |
Brake Disc Thickness | 10.4 mm |
Minimum thickness | 8.4 mm |
Bolt Hole Circle Diameter | 114.3 mm |
Centering Diameter | 76 mm |
Surface | Coated |
Number of mounting bores | 2 |
Function | Brake Disc |
Rim Hole Number | 5 -Hole |
Rotor Style | Solid |
Weight | 5.0 kg |
Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.384 kg |
Type | Mounting Kit, charger |
Function | Mounting Kit, charger |
for turbocharger (art. no.) | 186660, 187042 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.040 kg |
Placement on Vehicle | inner, both sides |
Length | 414 mm |
Outer diameter | 7 mm |
Inner diameter | 4 mm |
Function | Cable Pull, door release |
Type | Cable Pull, door release |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.38 kg |
Additional Information 2 | Requires special tools for mounting |
Chain Type | Simplex, with chain lock |
Number of Chain Links | 138 |
Timing Chain Size | G53HR |
Function | Timing Chain |
Type | Timing Chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.5 kg |
External Thread Size | M18 x 1,5 |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 340 mm |
Rod/Strut | Coupling Rod |
Cone Size | 22 mm |
Pipe Diameter | 30 mm |
Type | Link/Coupling Rod, stabiliser bar |
Function | Link/Coupling Rod, stabiliser bar |
Extra Description | ProKit |
Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Inner diameter | 51 mm |
Bearing Type | Angular Ball Bearing |
Function | Wheel Bearing Kit |
Width | 50 mm |
Outer diameter | 96 mm |
Additional Information | with fastening/mounting material |
Weight | 2.8 kg |
Type | Wheel Bearing Kit |
Additional Information 2 | with integrated magnetic sensor ring, with ABS sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.75 kg |
Number of Teeth | 18 |
Function | Water Pump, engine cooling |
Seal Material | Metal |
Water pump impeller material | Plastic |
Number of Wings | 24 |
Material | Cast Aluminium |
Additional Information | with gasket/seal |
Type | Water Pump, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Cable Length | 1825 mm |
Weight | 0.226 kg |
Resistance | 1050 Ohm |
Number of Connectors / Ports | 2 |
Paired article numbers | 170831 |
Placement on Vehicle | Front Axle Left |
Function | Sensor, wheel speed |
Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 705 mm |
Number of Connectors / Ports | 2 |
Weight | 0.050 kg |
Type | Sensor, wheel speed |
Function | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Oil Cooler, engine oil |
Weight | 0.551 kg |
Type | Oil Cooler, engine oil |
Height | 43 mm |
Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Oil Cooler, engine oil (105939)
- 1x Febi Gasket Set, oil cooler (105944)
Important compatibility info
Additional Information | with rubber-metal mounts |
Function | Control/Trailing Arm, wheel suspension |
Weight | 0.89 kg |
Type | Control/Trailing Arm, wheel suspension |
Steering arm type | Semi-trailing Arm |
Material | Steel |
Placement on Vehicle | Rear Axle Left, Lower, Rear Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.24 kg |
Thickness | 110 mm |
Bearing/Mounting Type | Rubber-Metal Mount |
Function | Mounting, engine |
Length | 210 mm |
Width | 180 mm |
Placement on Vehicle | Right |
Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Oil sump |
Weight | 2.8 kg |
Type | Oil sump |
Additional Information | without oil drain plug |
Wet Sump Material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle |
Outer diameter | 280 mm |
Rotor Style | Solid |
Weight | 4.04 kg |
Rim Hole Number | 5 -Hole |
Thickness | 65 mm |
Brake Disc Thickness | 10 mm |
Minimum thickness | 8.4 mm |
Bolt Hole Circle Diameter | 120 mm |
Centering Diameter | 75 mm |
Surface | Coated |
Number of mounting bores | 1 |
Type | Brake Disc Rotor |
Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023