Important compatibility info
Number of Coils | 5 |
Function | Suspension Spring |
Outer diameter | 180 mm |
Length | 379 mm |
Placement on Vehicle | Front Axle |
Weight | 3.6 kg |
Wire Diameter | 16 mm |
Type | Suspension Spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Plastic |
Operating Mode | Electric |
Weight | 0.07 kg |
Length | 125 mm. 320 mm. 600 mm |
Number of Connectors / Ports | 3 |
Function | Control, seat height adjustment |
Colour | Red, Black, Green |
Type | Control, seat height adjustment |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Width | 118 mm |
Outer diameter | 76 mm |
Inner diameter | 30 mm |
Bearing Type | Angular Ball Bearing |
Sealing lip material | NBR (nitrile butadiene rubber) |
Function | Wheel Bearing Kit |
Placement on Vehicle | Rear Axle |
Weight | 1.8 kg |
Additional Information | with fastening/mounting material |
Bolt Hole Circle Diameter | 98 mm |
Type | Wheel Bearing Kit |
Additional Information 2 | with integrated magnetic sensor ring, Wheel Bearing integrated into wheel hub, with ABS sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Right |
Bore Diameter | 12 mm |
Shock Absorber Type | Gas Pressure |
Shock Absorber System | Twin-Tube |
Shock Absorber Design | Suspension Strut |
Weight | 4.500 kg |
Shock Absorber Mounting Type | Top pin, Bottom Clamp |
Mounting bores distance | 53 mm |
Max. Length | 518 mm |
Min. Length | 317 mm |
Pipe Diameter | 51 mm |
Piston conrod diameter | 20 mm |
Type | Shock Absorber |
Function | Shock Absorber |
External Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Inner diameter | 148 mm |
Function | Air Filter |
Type | Air Filter |
Weight | 3.260 kg |
Filter type | Filter Insert |
Height | 481 mm |
Outer diameter | 282 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.24 kg |
Number of Wings | 7 |
Material | Cast Aluminium |
Seal Material | Paper |
Water pump impeller material | Metal |
Function | Water Pump, engine cooling |
Type | Water Pump, engine cooling |
Additional Information | with gasket/seal |
Additional Information 2 | with studs |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 3.24 kg |
Placement on Vehicle | Front Axle Right, Lower |
Function | Control/Trailing Arm, wheel suspension |
Paired article numbers | 43044 |
Steering arm type | Control Arm |
Material | Sheet Steel |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | without ball joint |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.98 kg |
Placement on Vehicle | Front Axle |
Length | 120 mm |
Cone Size | 30 mm |
Function | Tie Rod End |
External Thread Size | M24 x 1,5 |
Extra Description | ProKit |
Internal Thread Size | M24 x 1,5 RHT |
Type | Tie Rod End |
Thread Type | with right-hand thread |
Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.131 kg |
Height | 195 mm |
Width | 180 mm |
Inner diameter | 64 mm |
Function | Charge Air Hose |
Turbocharger line | Turbocharger to Inlet Manifold |
Type | Charge Air Hose |
Hose Length | 570 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Aluminium |
Function | Oil Cooler, engine oil |
Weight | 0.400 kg |
Additional Information | with gasket/seal |
Type | Oil Cooler, engine oil |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Cast Aluminium |
Number of Teeth | 19 |
Number of Wings | 6 |
Type | Water Pump, engine cooling |
Function | Water Pump, engine cooling |
Water pump impeller material | Metal |
Weight | 0.97 kg |
Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.164 kg |
Function | Tensioner, timing chain |
Type | Tensioner, timing chain |
Additional Information | with gasket/seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.092 kg |
Placement on Vehicle | Front Axle Right |
Number of Connectors / Ports | 2 |
Type | Sensor, wheel speed |
Function | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Hose Line, driver cab tilting device |
Type | Hose Line, driver cab tilting device |
Pressure | 400 bar |
Weight | 2.24 kg |
Inner diameter | 4.2 mm |
Outer diameter | 8.6 mm |
Length | 2775 mm |
External Thread Size | M12 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | before soot particulate filter |
Number of Connectors / Ports | 2 |
Weight | 0.049 kg |
Cable Length | 550 mm |
Type | Sensor, exhaust gas temperature |
Function | Sensor, exhaust gas temperature |
External Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.438 kg |
Function | Dust Cover Kit, shock absorber |
Type | Dust Cover Kit, shock absorber |
Width | 59 mm |
Length | 87 mm |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Rubber Buffer, suspension (176337)
- 2x Febi Protective Cap/Bellow, shock absorber (175559)
Important compatibility info
Function | Cable Repair Set, glow plug control unit |
Weight | 0.03 kg |
Cable Length | 250 mm |
Type | Cable Repair Set, glow plug control unit |
Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.09 kg |
Placement on Vehicle | Rear Axle Left, Rear |
Material | Aluminium |
Steering arm type | Control Arm |
Paired article numbers | 40364 |
Function | Control/Trailing Arm, wheel suspension |
Extra Description | ProKit |
Type | Control/Trailing Arm, wheel suspension |
Additional Information | with fastening/mounting material |
Additional Information 2 | with bearing, with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (28293)
- 1x Febi Screw (38199)
- 1x Febi Nut (37448)
Important compatibility info
Type | V-Belt |
Weight | 0.61 kg |
Length | 1950 mm |
Function | V-Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 2871 mm |
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Weight | 0.460 kg |
Function | V-Ribbed Belt |
Type | V-Ribbed Belt |
Number of Ribs | 11 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023