Important compatibility info
Weight | 1.72 kg |
Length | 120 mm |
Width | 107 mm |
Thickness | 110 mm |
Bearing/Mounting Type | Rubber-Metal Mount |
Function | Mounting, engine |
Type | Mounting, engine |
Replaces | 30634 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.115 kg |
Additional Information 2 | with top |
Width of castor bearing surface | 30 mm |
Material | Plastic |
Outer diameter | 70 mm |
Type | Deflection/Guide Pulley, v-ribbed belt |
Function | Deflection/Guide Pulley, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.57 kg |
Additional Information | with gasket/seal |
Number of Wings | 14 |
Type | Water Pump, engine cooling |
Function | Water Pump, engine cooling |
Water pump impeller material | Plastic |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.116 kg |
Type | Sensor, wheel speed |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Resistance | 1200 Ohm |
Number of Connectors / Ports | 2 |
Length | 3060 mm |
Additional Information | with bush |
Cable Length | 2880 mm |
Function | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Steering arm type | Control Arm |
Function | Control/Trailing Arm, wheel suspension |
Placement on Vehicle | Rear Axle Left, Front, Lower, Rear Axle Right |
Material | Steel |
Additional Information 2 | with ball joint, with rubber mount |
Weight | 0.856 kg |
Type | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Wings | 6 |
Weight | 0.663 kg |
Material | Cast Aluminium |
Function | Water Pump, engine cooling |
Water pump impeller material | Metal |
Seal Material | Paper |
Additional Information | with gasket/seal |
Type | Water Pump, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Cooling Hose | from engine cooler to water pump |
Function | Radiator Hose |
for OE number | 74 21 390 629 |
Type | Radiator Hose |
Weight | 0.6 kg |
Additional Information 2 | with clamps |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.31 kg |
Placement on Vehicle | Rear Axle |
Width | 60 mm |
Outer diameter | 75 mm |
Inner diameter | 42 mm |
Bearing Type | Angular Ball Bearing |
Type | Wheel Bearing Kit |
Function | Wheel Bearing Kit |
Additional Information 2 | with retaining ring |
Additional Information | with axle nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 65 mm |
Operating Mode | Automatic |
Housing material | Aluminium |
Function | Belt Tensioner, v-ribbed belt |
Track rollers material | Plastic |
Width of castor bearing surface | 25 mm |
Weight | 0.714 kg |
Type | Belt Tensioner, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.64 kg |
Placement on Vehicle | Left |
Material | Rubber/Metal |
Bearing/Mounting Type | Rubber-Metal Mount |
Function | Mounting, automatic transmission |
Type | Mounting, automatic transmission |
Replaces | 19492 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.18 kg |
Function | Ignition Coil |
Number of Connectors / Ports | 4 |
Type | Ignition Coil |
Replaces | 37318 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Chain Type | Simplex, with chain lock |
Number of Chain Links | 130 |
Weight | 0.355 kg |
Additional Information 2 | Requires special tools for mounting |
Timing Chain Size | G53HC, G53HR |
Function | Timing Chain |
Type | Timing Chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.41 kg |
Type | Mounting Kit, charger |
Function | Mounting Kit, charger |
for OE number | 0380.36 S1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 4.6 kg |
Rotor Style | Solid |
Rim Hole Number | 5 -Hole |
Placement on Vehicle | Rear Axle |
Outer diameter | 280 mm |
Thickness | 40.9 mm |
Brake Disc Thickness | 11 mm |
Minimum thickness | 9 mm |
Bolt Hole Circle Diameter | 108 mm |
Centering Diameter | 63.5 mm |
Surface | Coated |
Number of mounting bores | 1 |
Type | Brake Disc Rotor |
Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Inspection Tag | ECE R90 Approved |
Type | Brake Pad Set, disc brake |
Weight | 3.826 kg |
Width | 94.4 mm |
Wear Warning Contact | prepared for wear warning indicator |
Length | 209.5 mm |
Placement on Vehicle | Front Axle |
Thickness/Strength 1 | 16.4 mm |
Function | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Mounting points diameter | 10 mm |
Weight | 0.27 kg |
Material | Plastic |
Outer diameter | 124 mm |
Number of Ribs | 5 |
Function | Deflection/Guide Pulley, v-ribbed belt |
Width of castor bearing surface | 26 mm |
Type | Deflection/Guide Pulley, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle |
Outer diameter | 260 mm |
Thickness | 41.1 mm |
Brake Disc Thickness | 24 mm |
Minimum thickness | 21 mm |
Bolt Hole Circle Diameter | 100 mm |
Centering Diameter | 60.1 mm |
Surface | Coated |
Number of mounting bores | 1 |
Function | Brake Disc |
Rotor Style | Internally Vented |
Weight | 5.13 kg |
Rim Hole Number | 6 -Hole |
Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.596 kg |
Inner Length | 632 mm |
Outer Length | 845 mm |
Type | Cable Pull, clutch control |
Function | Cable Pull, clutch control |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Control/Trailing Arm, wheel suspension |
Placement on Vehicle | Front Axle Left, Lower |
Paired article numbers | 29427 |
Material | Cast Steel |
Steering arm type | Control Arm |
Weight | 4.251 kg |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with ball joint |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Brake Caliper |
Brake caliper piston diameter | 48 mm |
Placement on Vehicle | Rear Axle Right |
Material | Cast Iron |
Brake Caliper Type | Brake Caliper (1 piston), Brake Caliper with integrated parking brake |
Paired article numbers | 178051 |
Weight | 3.68 kg |
Function | Brake Caliper |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Steering arm type | Control Arm |
Paired article numbers | 29426 |
Placement on Vehicle | Front Axle Right, Lower |
Material | Cast Steel |
Function | Control/Trailing Arm, wheel suspension |
Weight | 4.252 kg |
Type | Control/Trailing Arm, wheel suspension |
Additional Information | with rubber mounts |
Additional Information 2 | with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Right Rear |
Length | 1962 mm |
Paired article numbers | 106712 |
Weight | 0.860 kg |
Type | Cable Pull, parking brake |
Function | Cable Pull, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Height | 473 mm |
Outer diameter | 304 mm |
Inner diameter | 157 mm |
Filter type | Filter Insert |
Function | Air Filter |
Type | Air Filter |
Weight | 3.825 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.9 kg |
Material | Rubber/Metal |
Placement on Vehicle | Rear Axle |
Outer diameter | 108 mm |
Function | Suspension Strut Support Mount |
Type | Suspension Strut Support Mount |
Height | 64 mm |
Additional Information 2 | without ball bearing |
Inner diameter | 11 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Paired article numbers | 178751 |
Weight | 1.965 kg |
Type | Brake Caliper |
Placement on Vehicle | Rear Axle Left |
Function | Brake Caliper |
Material | Cast Iron |
Brake Caliper Type | Brake Caliper (1 piston) |
Brake caliper piston diameter | 30 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Brake Caliper |
Function | Brake Caliper |
Weight | 3.68 kg |
Placement on Vehicle | Rear Axle Left |
Material | Cast Iron |
Brake Caliper Type | Brake Caliper (1 piston), Brake Caliper with integrated parking brake |
Paired article numbers | 178052 |
Brake caliper piston diameter | 48 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Width of castor bearing surface | 23 mm |
Housing material | Aluminium |
Function | Belt Tensioner, v-ribbed belt |
Track rollers material | Plastic |
Outer diameter | 65 mm |
Operating Mode | Automatic |
Weight | 0.630 kg |
Type | Belt Tensioner, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Brake Caliper Type | Brake Caliper (1 piston) |
Brake caliper piston diameter | 30 mm |
Placement on Vehicle | Rear Axle Right |
Material | Cast Iron |
Paired article numbers | 178750 |
Weight | 1.965 kg |
Type | Brake Caliper |
Function | Brake Caliper |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Brake caliper piston diameter | 41 mm |
Function | Brake Caliper |
Type | Brake Caliper |
Weight | 1.879 kg |
Paired article numbers | 181198 |
Brake Caliper Type | Brake Caliper (1 piston) |
Material | Cast Aluminium |
Placement on Vehicle | Rear Axle Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Cast Steel |
Steering arm type | Control Arm |
Paired article numbers | 18424 |
Placement on Vehicle | Front Axle Right, Lower |
Function | Control/Trailing Arm, wheel suspension |
Weight | 3.500 kg |
Type | Control/Trailing Arm, wheel suspension |
Additional Information | with holder, with rubber mounts |
Additional Information 2 | with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Brake caliper piston diameter | 41 mm |
Function | Brake Caliper |
Type | Brake Caliper |
Weight | 1.879 kg |
Paired article numbers | 181197 |
Brake Caliper Type | Brake Caliper (1 piston) |
Material | Cast Aluminium |
Placement on Vehicle | Rear Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Rim Hole Number | 4 -Hole |
Rotor Style | Solid |
Weight | 3.43 kg |
Placement on Vehicle | Front Axle |
Outer diameter | 266 mm |
Thickness | 27 mm |
Brake Disc Thickness | 10 mm |
Surface | Coated |
Type | Brake Disc Rotor |
Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 83 mm |
Type | Mounting, control/trailing arm |
Function | Mounting, control/trailing arm |
Inner diameter | 12.9 mm |
Thickness | 83 mm |
Paired article numbers | 177684 |
Placement on Vehicle | Rear Axle Left |
Material | Rubber/Metal |
Weight | 0.810 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Spanner Size | 22 |
External Thread Size | M18 x 1,5 |
Function | Oxygen Sensor |
Type | Oxygen Sensor |
Lambda Sensor | Heated, Regulating Sensor |
Number of circuits | 4 |
Cable Length | 400 mm |
Weight | 0.091 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Mounting, control/trailing arm |
Outer diameter | 83 mm |
Thickness | 124 mm |
Material | Rubber/Metal |
Paired article numbers | 177682 |
Placement on Vehicle | Rear Axle Right |
Weight | 0.808 kg |
Function | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M10 x 1 |
Number of hoses | 2 |
Internal Thread Size | M10 x 1 |
Weight | 0.367 kg |
Placement on Vehicle | Rear Axle Right |
Length | 346 mm |
Paired article numbers | 172682 |
Thread Length | 7 mm |
Type | Brake Hose |
Function | Brake Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
for OE number | 06K 103 495 BL |
Extra Description | febi Plus |
Function | Oil Separator, crankcase ventilation |
Weight | 0.431 kg |
Type | Oil Separator, crankcase ventilation |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.02 kg |
Operating Mode | Electric |
Number of Connectors / Ports | 3 |
Function | Sensor, intake manifold pressure |
Type | Sensor, intake manifold pressure |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Belt Pulley, crankshaft |
Number of Ribs | 5 |
Inner diameter | 30 mm |
Outer diameter | 158 mm |
Weight | 2.070 kg |
Parameter | 6PK |
Thickness | 27 mm |
Type | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with gasket/seal |
Material | Cast Aluminium |
Type | Water Pump, engine cooling |
Additional Information 2 | with seal ring |
Weight | 1.0 kg |
Number of Wings | 7 |
Function | Water Pump, engine cooling |
Water pump impeller material | Metal |
Seal Material | Rubber, Paper |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.7 kg |
Material | Rubber |
Function | Seal, windscreen |
Type | Seal, windscreen |
Styling | without trim strip |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.04 kg |
Number of Connectors / Ports | 2 |
Function | Sensor, crankshaft pulse |
Type | Sensor, crankshaft pulse |
Length | 84 mm |
Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 95 mm |
Thickness | 35 mm |
Additional Information 2 | with spacer disc, with retaining ring |
Inner diameter | 21 mm |
Steering arm type | for trailing arm |
Weight | 3.440 kg |
for OE number | 20702095 |
Type | Repair Kit, control/trailing arm |
Function | Repair Kit, control/trailing arm |
Hole Spacing | 130 mm |
Placement on Vehicle | Rear Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.43 kg |
Filter type | In-Line Filter, with connection for water sensor, with water drain screw |
Function | Fuel filter |
Additional Information 2 | with seal ring |
Height | 128 mm |
Pipe Diameter | 8 mm |
Type | Fuel filter |
Outer diameter | 103 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Bore Diameter | 19 mm |
Fill Medium | Brake Fluid |
Function | Master Cylinder, clutch |
Weight | 0.148 kg |
Type | Master Cylinder, clutch |
for OE number | 21 52 6 758 829 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | V-Belt |
Weight | 0.61 kg |
Length | 1950 mm |
Function | V-Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Right |
Material | Cast Aluminium |
Brake Caliper Type | Brake Caliper (1 piston) |
Paired article numbers | 182944 |
Weight | 1.3 kg |
Type | Brake Caliper |
Function | Brake Caliper |
Brake caliper piston diameter | 38 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Brake Caliper |
Weight | 1.3 kg |
Paired article numbers | 182945 |
Brake Caliper Type | Brake Caliper (1 piston) |
Material | Cast Aluminium |
Placement on Vehicle | Rear Axle Left |
Function | Brake Caliper |
Brake caliper piston diameter | 38 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.065 kg |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Length | 985 mm |
Number of Connectors / Ports | 2 |
Function | Sensor, wheel speed |
Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 418 mm |
Width | 194 mm |
Additional Information | with gasket/seal |
Material | Aluminium |
Thickness | 42 mm |
Weight | 0.936 kg |
Type | Heat Exchanger, interior heating |
Function | Heat Exchanger, interior heating |
Core Length | 370 mm |
Core Width | 188 mm |
Core Depth | 42 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023