Important compatibility info
Function | Oil Cooler, engine oil |
Weight | 0.679 kg |
Type | Oil Cooler, engine oil |
for OE number | 11 42 8 510 856 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.48 kg |
Outer diameter | 32 mm |
Opening Temperature | 87 °C |
Function | Thermostat, coolant |
Type | Thermostat, coolant |
Additional Information | with temperature sensor, with gasket/seal |
Housing Type | with housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Light Design | LED |
Mounting bores distance | 78 mm |
Length | 181 mm |
Fulfils ECE norm | R7, R91 |
Placement on Vehicle | Right |
Cable Length | 500 mm |
Type | End Outline Marker Light |
Weight | 0.169 kg |
Voltage from | 12 V |
Port / Connector type | PRS |
Voltage to | 24 V |
Protection Type (IP Code) | IP67 |
Function | End Outline Marker Light |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.001 kg |
Material | Rubber/Metal |
Placement on Vehicle | Front Axle Right |
Paired article numbers | 11973 |
Function | Repair Kit, suspension strut support mount |
Extra Description | ProKit |
Type | Repair Kit, suspension strut support mount |
Additional Information 2 | with fastening material, with ball bearing |
Replaces | 37582 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension Strut Support Mount (11971)
- 1x Febi Rolling Bearing, suspension strut support mount (11608)
- 2x Febi Screw (18550)
- 1x Febi Nut (05359)
Important compatibility info
Function | Alternator Freewheel Clutch |
Type | Alternator Freewheel Clutch |
Weight | 0.425 kg |
Number of Ribs | 6 |
Inner diameter | 17 mm |
Outer diameter | 58 mm |
Width | 23 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Expansion Tank, coolant |
Type | Expansion Tank, coolant |
Material | Plastic |
Weight | 0.480 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Left Rear |
Length | 2055 mm |
Paired article numbers | 106946 |
Function | Cable Pull, parking brake |
Type | Cable Pull, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.463 kg |
Function | Hydraulic Hose, steering |
Internal Thread Size | M14 x 1,5 |
External Thread Size | M16 x 1,5 |
Type | Hydraulic Hose, steering |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Weight | 0.08 kg |
Function | Sensor, wheel speed |
Length | 940 mm |
Number of Connectors / Ports | 2 |
Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.01 kg |
Placement on Vehicle | Rear Axle Right |
Type | Sensor, wheel speed |
Number of Connectors / Ports | 2 |
Paired article numbers | 179141 |
Function | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Rim Hole Number | 5 -Hole |
Weight | 4.74 kg |
Placement on Vehicle | Rear Axle |
Outer diameter | 268 mm |
Thickness | 45.1 mm |
Brake Disc Thickness | 12 mm |
Minimum thickness | 10 mm |
Bolt Hole Circle Diameter | 105 mm |
Centering Diameter | 60 mm |
Surface | Coated |
Number of mounting bores | 1 |
Function | Brake Disc |
Rotor Style | Solid |
Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Brake Caliper Type | Brake Caliper (1 piston) |
Paired article numbers | 181164 |
Weight | 2.350 kg |
Type | Brake Caliper |
Function | Brake Caliper |
Brake caliper piston diameter | 40 mm |
Material | Cast Iron |
Placement on Vehicle | Rear Axle Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 5.78 kg |
Placement on Vehicle | Rear Axle |
Outer diameter | 294 mm |
Thickness | 35 mm |
Minimum thickness | 20 mm |
Bolt Hole Circle Diameter | 108 mm |
Surface | Coated |
Number of mounting bores | 3 |
Centering Diameter | 71.1 mm |
Function | Brake Disc |
Rim Hole Number | 5 -Hole |
Brake Disc Thickness | 22 mm |
Rotor Style | Internally Vented |
Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Voltage | 24 V |
Bore Diameter | 8 mm |
Number of Connectors / Ports | 2 |
Weight | 0.53 kg |
Type | Solenoid Valve |
Function | Solenoid Valve |
Internal Thread Size | M12 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.682 kg |
Placement on Vehicle | Front Axle Right, Lower |
Steering arm type | Control Arm |
Paired article numbers | 37291 |
Material | Sheet Steel |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with ball joint |
Additional Information | with lock nut, with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (37196)
- 1x Febi Mounting, control/trailing arm (31253)
Important compatibility info
Weight | 2.669 kg |
Placement on Vehicle | Front Axle Left, Lower |
Steering arm type | Control Arm |
Paired article numbers | 37292 |
Material | Sheet Steel |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with ball joint |
Additional Information | with rubber mounts, with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Mounting, control/trailing arm (31253)
- 1x Febi Control/Trailing Arm, wheel suspension (37197)
Important compatibility info
Number of Chain Links | 94 |
Weight | 0.4 kg |
Chain Type | Simplex, Closed chain |
Type | Timing Chain |
Timing Chain Size | G68V, G68WN |
Additional Information 2 | Requires special tools for mounting |
Function | Timing Chain |
Replaces | 09339 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.838 kg |
Type | Clutch Release Bearing |
Function | Clutch Release Bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.395 kg |
Brake Caliper Type | Brake Caliper (1 piston) |
Type | Brake Caliper |
Paired article numbers | 178744 |
Function | Brake Caliper |
Material | Cast Aluminium |
Placement on Vehicle | Rear Axle Right |
Brake caliper piston diameter | 38 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Brake Shaft, drum brake |
Screw length below head | 205 mm |
Weight | 3.14 kg |
Paired article numbers | 171877 |
Number of Teeth | 26 |
Outer diameter | 97 mm |
Length | 253 mm |
Placement on Vehicle | Left |
Type | Brake Shaft, drum brake |
DIN / ISO | 5480 |
Brake Shaft Cam | S-cam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Right, Front Axle Right |
Paired article numbers | 07073 |
Weight | 6.23 kg |
Function | Brake Shaft, drum brake |
Type | Brake Shaft, drum brake |
Length | 540 mm |
Outer diameter | 97 mm |
Number of Teeth | 26 |
DIN / ISO | 5480 |
Screw length below head | 491 mm |
Brake Shaft Cam | S-cam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.011 kg |
Function | Multi-Function Switch |
Number of Connectors / Ports | 12 |
Extra Description | febi Plus |
Type | Multi-Function Switch |
Combi Switch Function | Mirror Adjustment, Window Regulator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with fastening/mounting material, without electric motor |
Weight | 0.55 kg |
Function | Window Regulator |
Placement on Vehicle | Left Rear |
Operating Mode | Electric |
Paired article numbers | 108257 |
Type | Window Regulator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Brake Caliper |
Placement on Vehicle | Front Axle Left |
Material | Cast Iron |
Brake Caliper Type | Brake Caliper (1 piston) |
Paired article numbers | 178187 |
Weight | 4.6 kg |
Function | Brake Caliper |
Brake caliper piston diameter | 60 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Sensor, wheel speed |
Type | Sensor, wheel speed |
Cable Length | 940 mm |
Weight | 0.096 kg |
Number of Connectors / Ports | 2 |
Paired article numbers | 176139 |
Placement on Vehicle | Front Axle Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Left, Centre |
Additional Information | with fastening/mounting material |
Material | Sheet Steel |
Additional Information 2 | with bearing |
Steering arm type | Control Arm |
Paired article numbers | 192997 |
Weight | 1.692 kg |
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Extra Description | ProKit |
External Thread Size | M12 x 1,25 |
Additional Information
Technical Information
After replacement, the optical driver assistance systems (cameras, radar, etc.) may need to be recalibrated. Please observe the manufacturer's instructions.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (103725)
- 2x Febi Fastening Bolt, control arm (177562)
- 1x Febi Fastening Bolt, control arm (175145)
Important compatibility info
Placement on Vehicle | Rear Axle |
Length | 345 mm |
Diameter | 1 mm |
Additional Information | with rubber-metal mount |
Rod/Strut | Coupling Rod |
Inner diameter 1 | 14 mm |
Inner diameter 2 | 15 mm |
Weight | 1.150 kg |
Pipe Diameter | 16 mm |
Type | Link/Coupling Rod, stabiliser bar |
Function | Link/Coupling Rod, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.540 kg |
Type | Repair Kit, adjuster |
Function | Repair Kit, adjuster |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Width | 118 mm |
Outer diameter | 76 mm |
Inner diameter | 30 mm |
Bearing Type | Angular Ball Bearing |
Sealing lip material | NBR (nitrile butadiene rubber) |
Function | Wheel Bearing Kit |
Placement on Vehicle | Rear Axle |
Weight | 1.8 kg |
Additional Information | with fastening/mounting material |
Bolt Hole Circle Diameter | 98 mm |
Type | Wheel Bearing Kit |
Additional Information 2 | with integrated magnetic sensor ring, Wheel Bearing integrated into wheel hub, with ABS sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Brake Caliper Type | Brake Caliper (1 piston) |
Brake caliper piston diameter | 38 mm |
Placement on Vehicle | Rear Axle Left |
Material | Cast Aluminium |
Type | Brake Caliper |
Function | Brake Caliper |
Paired article numbers | 179788 |
Weight | 1.67 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Brake Caliper |
Placement on Vehicle | Front Axle Right |
Material | Cast Iron |
Brake Caliper Type | Brake Caliper (1 piston) |
Paired article numbers | 178186 |
Weight | 4.6 kg |
Function | Brake Caliper |
Brake caliper piston diameter | 60 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, transmission sided, Front Axle Right |
Internal Teeth, wheel side | 28 |
Weight | 2.198 kg |
Type | Joint Kit, drive shaft |
Function | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 2871 mm |
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Weight | 0.460 kg |
Function | V-Ribbed Belt |
Type | V-Ribbed Belt |
Number of Ribs | 11 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Left, Front Axle Left |
Length | 540 mm |
Function | Brake Shaft, drum brake |
Paired article numbers | 07072 |
Weight | 6.198 kg |
Type | Brake Shaft, drum brake |
Outer diameter | 97 mm |
Number of Teeth | 26 |
DIN / ISO | 5480 |
Screw length below head | 491 mm |
Brake Shaft Cam | S-cam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Right |
Material | Cast Aluminium |
Brake Caliper Type | Brake Caliper (1 piston) |
Function | Brake Caliper |
Type | Brake Caliper |
Weight | 1.67 kg |
Paired article numbers | 179787 |
Brake caliper piston diameter | 38 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Pressure Limiting Valve |
Weight | 0.38 kg |
Internal Thread Size | M22 x 1,5 |
Function | Pressure Limiting Valve |
Outlet pressure from | 7 bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.2 kg |
Placement on Vehicle | Rear |
Operating Mode | Mechanical |
Shock Absorber Mounting Type | Top eye, Bottom eye |
Max. Length | 224 mm |
Min. Length | 194 mm |
Pipe Diameter | 42 mm. 48 mm |
Mounting points diameter | 14 mm |
Type | Shock Absorber, driver cab suspension |
Function | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.128 kg |
Material | Cast Aluminium |
Number of Wings | 5 |
Function | Water Pump, engine cooling |
Water pump impeller material | Metal |
Seal Material | Paper |
Additional Information | with gasket/seal |
Type | Water Pump, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.5 kg |
Housing length | 340 mm |
Mounting points diameter | 18 mm |
Function | Gas Spring, boot/cargo area |
Piston conrod diameter | 10 mm |
Stroke | 176 mm |
Eject Force | 680 N |
Housing Diameter | 18 mm |
Length | 582 mm |
Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Auxiliary water pump (cooling water circuit) |
Function | Auxiliary water pump (cooling water circuit) |
Material | Plastic |
Weight | 0.32 kg |
Number of Connectors / Ports | 2 |
Voltage | 12 V |
for OE number | 078 121 601 B |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.24 kg |
Number of Wings | 7 |
Material | Cast Aluminium |
Seal Material | Paper |
Water pump impeller material | Metal |
Function | Water Pump, engine cooling |
Type | Water Pump, engine cooling |
Additional Information | with gasket/seal |
Additional Information 2 | with studs |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Extra Description | febi Plus |
Voltage | 12 V |
Operating Mode | Electric-pneumatic |
Function | Pressure converter, turbocharger |
Type | Pressure converter, turbocharger |
Weight | 0.221 kg |
Number of Connectors / Ports | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.75 kg |
Number of Connectors / Ports | 4 |
Function | Relay Valve |
Internal Thread Size | M22 x 1,5 |
Type | Relay Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 2710 mm |
Material | ACM (Polyacrylate) |
Function | Gasket, oil sump |
Weight | 0.309 kg |
Type | Gasket, oil sump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Brake Caliper |
Placement on Vehicle | Rear Axle Right |
Material | Cast Iron |
Brake Caliper Type | Brake Caliper (1 piston) |
Paired article numbers | 178153 |
Weight | 2.55 kg |
Function | Brake Caliper |
Brake caliper piston diameter | 44 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Width | 35 mm |
Outer diameter | 123 mm |
Inner diameter | 30 mm |
Function | Belt Pulley, alternator |
Weight | 0.746 kg |
Type | Belt Pulley, alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Control Valve, camshaft adjustment |
Placement on Vehicle | Exhaust Side |
Weight | 0.104 kg |
Extra Description | febi Plus |
Function | Control Valve, camshaft adjustment |
Number of Connectors / Ports | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Coils | 5 |
Function | Suspension Spring |
Outer diameter | 180 mm |
Length | 379 mm |
Placement on Vehicle | Front Axle |
Weight | 3.6 kg |
Wire Diameter | 16 mm |
Type | Suspension Spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.98 kg |
Placement on Vehicle | Front Axle |
Length | 120 mm |
Cone Size | 30 mm |
Function | Tie Rod End |
External Thread Size | M24 x 1,5 |
Extra Description | ProKit |
Internal Thread Size | M24 x 1,5 RHT |
Type | Tie Rod End |
Thread Type | with right-hand thread |
Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.092 kg |
Placement on Vehicle | Front Axle Right |
Number of Connectors / Ports | 2 |
Type | Sensor, wheel speed |
Function | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023