Proud to be a UK-based company
Contact us
Important compatibility info
| Number of Connectors / Ports | 2 |
| Weight | 0.062 kg |
| Cable Length | 620 mm |
| Type | Sensor, exhaust gas temperature |
| Function | Sensor, exhaust gas temperature |
| External Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.11
Important compatibility info
| Length | 75 mm |
| Height | 58 mm |
| Width | 27 mm |
| Voltage | 24 V |
| Function | Solenoid Valve, shift cylinder |
| Type | Solenoid Valve, shift cylinder |
| Weight | 0.35 kg |
| Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£97.49
Important compatibility info
| Additional Information | with rubber mounts |
| Paired article numbers | 185591 |
| Function | Control/Trailing Arm, wheel suspension |
| External Thread Size | M16 x 1,5 |
| Placement on Vehicle | Front Axle Right, Lower, Rear, outer |
| Material | Aluminium |
| Additional Information 2 | with ball joint |
| Steering arm type | Control Arm |
| Cone Size | 19 mm |
| Weight | 3.480 kg |
| Type | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.08
Important compatibility info
| Function | Sensor, boost pressure |
| Number of Connectors / Ports | 3 |
| Weight | 0.01 kg |
| Type | Sensor, boost pressure |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£43.34
Important compatibility info
| Weight | 0.390 kg |
| Placement on Vehicle | Right |
| Function | Holder, engine mounting system |
| Type | Holder, engine mounting system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.96
Important compatibility info
| Additional Information | with gasket/seal |
| Weight | 1.18 kg |
| Type | EGR Valve |
| Function | EGR Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£121.83
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 61 mm |
| Width | 62 mm |
| Material | PU (Polyurethane) |
| Weight | 0.054 kg |
| Type | Rubber Buffer, suspension |
| Function | Rubber Buffer, suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£6.15
Important compatibility info
| Placement on Vehicle | inner |
| Length | 196 mm |
| Outer diameter | 85 mm |
| Steering arm type | for triangular control arm (CV) |
| Mounting points diameter | 25 mm |
| Function | Repair Kit, control/trailing arm |
| Weight | 2.482 kg |
| Type | Repair Kit, control/trailing arm |
| Additional Information 2 | with retaining ring |
| Hole Spacing | 153 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.02
Important compatibility info
| Additional Information 2 | with seal ring |
| Weight | 0.015 kg |
| Colour | Black |
| Number of Connectors / Ports | 2 |
| Function | Sensor, coolant temperature |
| Type | Sensor, coolant temperature |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.97
Important compatibility info
| Weight | 0.66 kg |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 305 mm |
| Function | Inner Tie Rod |
| Extra Description | ProKit |
| Type | Inner Tie Rod |
| Additional Information | with counter nut |
| External Thread Size | M16 x 1,5, M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.77
Important compatibility info
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 120 |
| Type | Timing Chain Kit |
| Function | Timing Chain Kit |
| Weight | 0.342 kg |
| Extra Description | Standard Medium Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (48286)
- 1x Febi Tensioner, timing chain (101149)
- 1x Febi Guide, timing chain (107854)
- 1x Febi Guide, timing chain (107855)
- 1x Febi Gear/Sprocket, camshaft (101157)
£154.18
Important compatibility info
| External Thread Size | M14 x 1,5 |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Internal Thread Size | M16 x 1,5 |
| Function | Tie Rod End |
| Length | 87 mm |
| Additional Information | with counter nut |
| Weight | 0.655 kg |
| Type | Tie Rod End |
| Spanner Size | 24 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£17.48
Important compatibility info
| Weight | 7.7 kg |
| Rotor Style | Internally Vented |
| Placement on Vehicle | Front Axle |
| Outer diameter | 288 mm |
| Thickness | 46 mm |
| Brake Disc Thickness | 25 mm |
| Minimum thickness | 23 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Centering Diameter | 68 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Function | Brake Disc |
| Rim Hole Number | 5 -Hole |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£53.17
Important compatibility info
| Type | Brake Caliper |
| Placement on Vehicle | Rear Axle Left |
| Material | Cast Aluminium |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 178117 |
| Weight | 1.75 kg |
| Function | Brake Caliper |
| Brake caliper piston diameter | 38 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£46.84
Important compatibility info
| Type | Brake Caliper |
| Placement on Vehicle | Front Axle Right |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (2 pistons) |
| Paired article numbers | 179430 |
| Weight | 4.093 kg |
| Function | Brake Caliper |
| Brake caliper piston diameter | 46 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£51.70
Important compatibility info
| Placement on Vehicle | Rear Axle Right, Rear Axle Left, Rear Axle Lower |
| Rod/Strut | Guide Rod |
| Weight | 0.70 kg |
| Function | Rod/Strut, wheel suspension |
| Additional Information 2 | with fastening material |
| Extra Description | ProKit |
| Type | Rod/Strut, wheel suspension |
| Hole Spacing | 196 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Rod/Strut, wheel suspension (36733)
- 2x Febi Bolt, control arm (43405)
£19.30
Important compatibility info
| Weight | 0.21 kg |
| Placement on Vehicle | Front Axle, Wheel Side |
| Length | 107 mm |
| Material | Thermoplast |
| Inner diameter 1 | 32 mm |
| Inner diameter 2 | 82 mm |
| Function | Bellow Kit, drive shaft |
| Type | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow, drive shaft (01003)
- 1x Febi Nut, kingpin (22953)
- 1x Febi Clamping Clip (45643)
- 1x Febi Clamping Clip (38758)
- 1x Febi Molybdenum Grease (02582)
£15.39
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Length | 360 mm |
| Paired article numbers | 02289 |
| Cone Size | 16.4 mm |
| Function | Tie Rod |
| Weight | 0.839 kg |
| Extra Description | ProKit |
| Type | Tie Rod |
| Additional Information 2 | with crown nut |
| External Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£29.50
Important compatibility info
| Inner diameter | 55 mm |
| Function | Suspension, propshaft |
| Type | Suspension, propshaft |
| Weight | 0.24 kg |
| Additional Information 2 | without ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.59
Important compatibility info
| Weight | 0.36 kg |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Bearing Type | Tapered Roller Bearing |
| Function | Wheel Bearing Kit |
| Width 2 | 15.5 mm |
| Outer diameter 2 | 45 mm |
| Width 1 | 16 mm |
| Outer diameter 1 | 59 mm |
| Inner diameter 2 | 19 mm |
| Inner diameter 1 | 32 mm |
| Type | Wheel Bearing Kit |
| Additional Information 2 | with shaft seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Shaft Seal, wheel bearing (04941)
£15.05
Important compatibility info
| Placement on Vehicle | Rear, Rear Axle Left, Rear Axle Right |
| Outer diameter | 62.7 mm |
| Thickness | 63 mm |
| Inner diameter | 22.1 mm |
| Material | Rubber/Metal |
| Paired article numbers | 180874 |
| Function | Bushing, axle beam |
| Type | Bushing, axle beam |
| Weight | 0.294 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£23.89
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (2 pistons) |
| Paired article numbers | 194055 |
| Weight | 3.800 kg |
| Type | Brake Caliper |
| Function | Brake Caliper |
| Brake caliper piston diameter | 44.4 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£38.88
Important compatibility info
| Brake caliper piston diameter | 46 mm |
| Paired article numbers | 181547 |
| Weight | 4.95 kg |
| Brake Caliper Type | Brake Caliper (2 pistons) |
| Material | Cast Iron |
| Placement on Vehicle | Rear Axle Left |
| Type | Brake Caliper |
| Function | Brake Caliper |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£45.69
Important compatibility info
| Weight | 1.120 kg |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Function | Tie Rod |
| Extra Description | ProKit |
| Type | Tie Rod |
| Adjustable | Adjustable |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£24.11
Important compatibility info
| Weight | 0.02 kg |
| Outer diameter | 31 mm |
| Thickness | 3 mm |
| Operating Mode | Mechanical |
| Function | Adjusting Disc, valve clearance |
| Type | Adjusting Disc, valve clearance |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£5.88
Important compatibility info
| Weight | 6.84 kg |
| Charge Type | Exhaust Turbocharger |
| Type | Charger, charging (supercharged/turbocharged) |
| Additionally required parts | Mounting Kit |
| Function | Charger, charging (supercharged/turbocharged) |
| Extra Description | Garrett Turbo NEW |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£683.94
Important compatibility info
| Weight | 0.098 kg |
| Function | Linkage Damper, injection system |
| Type | Linkage Damper, injection system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£28.31
Important compatibility info
| Weight | 0.091 kg |
| Additional Information 2 | with clamps |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Function | Bellow Kit, steering |
| Inner diameter 2 | 67 mm |
| Inner diameter 1 | 16 mm |
| Material | Thermoplast |
| Length | 213 mm |
| Type | Bellow Kit, steering |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Clamping Clip (38764)
- 1x Febi Bellow, steering (22631)
- 1x Febi Clamping Clip (38756)
- 1x Febi Gasket, steering gear (22632)
£12.08
Important compatibility info
| Outer diameter | 18.1 mm |
| Length | 14 mm |
| Function | Collector End Shield Bush, starter |
| Weight | 0.009 kg |
| Inner diameter | 14.06 mm |
| Type | Collector End Shield Bush, starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£4.53
Important compatibility info
| Type | Oil Dipstick |
| Function | Oil Dipstick |
| Extra Description | febi Plus |
| Weight | 0.018 kg |
| Length from grip collar to max. marking | 470 mm |
| Length from grip collar to min. marking | 520 mm |
| Colour | Yellow |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£8.19
Important compatibility info
| Weight | 0.047 kg |
| Type | Tightening Strap, wing |
| Function | Tightening Strap, wing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£5.88
Important compatibility info
| Height | 99 mm |
| Outer diameter | 77.5 mm |
| Spanner Size | 24 |
| Bolt Head/Nut Design | Male Hex |
| Tightening Torque | 20 Nm |
| Type | Housing, automated manual transmission (AMT) |
| Function | Housing, automated manual transmission (AMT) |
| Extra Description | febi Plus |
| Weight | 0.081 kg |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.88
Important compatibility info
| Outer diameter | 100 mm. 80 mm |
| Function | Bellow, air suspension |
| Length 4 | 210 mm |
| Type | Bellow, air suspension |
| Height 1 | 81 mm |
| Weight | 0.4 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.00
Important compatibility info
| Extra Description | febi Plus |
| Function | Control Valve, camshaft adjustment |
| Type | Control Valve, camshaft adjustment |
| Weight | 0.285 kg |
| Number of Connectors / Ports | 2 |
| Placement on Vehicle | Intake Side |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£51.27
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Length | 745 mm |
| Steering arm type | Control Arm |
| Bore Diameter | 21 mm |
| Weight | 11.600 kg |
| Pipe Diameter | 50 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£105.78
Important compatibility info
| Rim Hole Number | 5 -Hole |
| Weight | 3.300 kg |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 245 mm |
| Thickness | 39.7 mm |
| Brake Disc Thickness | 10 mm |
| Minimum thickness | 8 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Centering Diameter | 68 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Function | Brake Disc |
| Rotor Style | Solid |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.94
Important compatibility info
| Type | Repair Kit, injector holder |
| Function | Repair Kit, injector holder |
| Weight | 0.043 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Seal Kit, injector nozzle (40135)
- 1x Febi Screw (46272)
- 1x Febi Screw, injection nozzle holder (176311)
£24.98
Important compatibility info
| Placement on Vehicle | Wheel Side, Front Axle |
| Length | 101 mm |
| Material | Thermoplastic polyester elastomer |
| Inner diameter 1 | 24 mm |
| Weight | 0.163 kg |
| Inner diameter 2 | 72 mm |
| Joint Type | CV Joint |
| Type | Bellow Kit, drive shaft |
| Function | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow Kit, drive shaft (180143)
- 1x Febi Molybdenum Grease (02582)
£19.74
Important compatibility info
| Height | 144 mm |
| Outer diameter | 96 mm |
| Weight | 0.75 kg |
| Type | Filter, operating hydraulics |
| Function | Filter, operating hydraulics |
| Gasket outer diameter | 72 mm |
| Gasket inner diameter | 63 mm |
| Internal Thread Size | 3/4" - 16 UNF |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.45
Important compatibility info
| Function | Shock Absorber |
| Shock Absorber Type | Oil Pressure |
| Placement on Vehicle | Front Axle |
| Shock Absorber Design | Telescopic Shock Absorber |
| Weight | 2.3 kg |
| Mounting points diameter | 14 mm |
| Type | Shock Absorber |
| Pipe Diameter | 57 mm. 45 mm |
| Min. Length | 436 mm |
| Max. Length | 735 mm |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£130.17
Important compatibility info
| Placement on Vehicle | Rear Axle Left |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 181775 |
| Function | Brake Caliper |
| Brake caliper piston diameter | 30 mm |
| Weight | 1.430 kg |
| Type | Brake Caliper |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£39.10
Important compatibility info
| Weight | 0.182 kg |
| Placement on Vehicle | Upper |
| Material | Rubber, Rubber with fabric lining |
| Outer diameter | 41 mm. 45 mm |
| Inner diameter | 32 mm. 36 mm |
| Colour | Black |
| Cooling Hose | from engine cooler to water pump |
| Function | Radiator Hose |
| Type | Radiator Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£8.39
Important compatibility info
| Chain Type | Silent Chain, Closed chain |
| Function | Chain, oil pump drive |
| Additional Information 2 | Requires special tools for mounting |
| Weight | 0.228 kg |
| Type | Chain, oil pump drive |
| Number of Chain Links | 72 |
| Placement on Vehicle | Lower |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£22.57
Important compatibility info
| External Teeth, Diff.Side | 24 |
| Additional Information | with Split Pin |
| Additional Information 2 | with nut |
| Thread Size | M24x1,5 |
| External Teeth, Wheel Side | 25 |
| Weight | 5.458 kg |
| Function | Drive Shaft |
| Placement on Vehicle | Front Axle Left |
| Type | Drive Shaft |
| Min. Length | 618 mm |
| Wheel Sided Joint Diameter | 86 mm |
| Transmission-side joint diameter | 74.2 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.95
Important compatibility info
| Weight | 0.26 kg |
| Placement on Vehicle | Rear |
| Length | 80 mm |
| Material | Rubber/Metal |
| Outer diameter | 38 mm |
| Inner diameter | 16 mm |
| Function | Bush, spring eye |
| Type | Bush, spring eye |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.27
Important compatibility info
| Seal Material | Metal |
| Water pump impeller material | Metal |
| Function | Water Pump, engine cooling |
| Number of Wings | 8 |
| Material | Cast Aluminium |
| Additional Information 2 | with studs |
| Additional Information | with gasket/seal |
| Type | Water Pump, engine cooling |
| Weight | 2.11 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£70.94
Important compatibility info
| Weight | 1.07 kg |
| Placement on Vehicle | Rear Axle |
| Length | 105.5 mm |
| Width | 56 mm |
| Inspection Tag | ECE R90 Approved |
| Additional Information 2 | with bolts/screws |
| Function | Brake Pad Set, disc brake |
| Thickness/Strength 1 | 16 mm |
| Type | Brake Pad Set, disc brake |
| Replaces | 16476 |
| Wear Warning Contact | prepared for wear warning indicator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£16.73
Important compatibility info
| Placement on Vehicle | Front Axle |
| Outer diameter | 236 mm |
| Thickness | 35.3 mm |
| Brake Disc Thickness | 12.5 mm |
| Minimum thickness | 9.7 mm |
| Bolt Hole Circle Diameter | 102 mm |
| Centering Diameter | 86 mm |
| Surface | Coated |
| Function | Brake Disc |
| Rim Hole Number | 4 -Hole |
| Rotor Style | Solid |
| Type | Brake Disc Rotor |
| Weight | 3.72 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.91
Important compatibility info
| Weight | 0.087 kg |
| Placement on Vehicle | Upper Front Axle |
| Material | Rubber |
| Thickness | 48 mm |
| Function | Bump Stop, steering knuckle |
| Type | Bump Stop, steering knuckle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£5.67
Important compatibility info
| Paired article numbers | 175304 |
| Type | Splash Guard, brake disc |
| Function | Splash Guard, brake disc |
| Weight | 0.177 kg |
| Placement on Vehicle | Front Axle Left |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.24
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023