Proud to be a UK-based company
Contact us
Important compatibility info
| Brake Caliper Type | Brake Caliper (1 piston) |
| Material | Cast Iron |
| Weight | 2.9 kg |
| Function | Brake Caliper |
| Type | Brake Caliper |
| Placement on Vehicle | Front Axle Left |
| Brake caliper piston diameter | 57 mm |
| Paired article numbers | 181555 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£43.83
Important compatibility info
| Paired article numbers | 181554 |
| Weight | 2.91 kg |
| Type | Brake Caliper |
| Function | Brake Caliper |
| Brake caliper piston diameter | 57 mm |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Material | Cast Iron |
| Placement on Vehicle | Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£43.83
Important compatibility info
| Weight | 1.866 kg |
| Shock Absorber System | Twin-Tube |
| Function | Shock Absorber |
| Shock Absorber Type | Gas Pressure |
| Bore Diameter | 14 mm. 12 mm |
| Max. Length | 507 mm |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Min. Length | 317 mm |
| Mounting bores distance | 507 mm |
| Shock Absorber Design | Telescopic Shock Absorber |
| Placement on Vehicle | Rear Axle Right, Rear Axle Left |
| Type | Shock Absorber |
| Pipe Diameter | 53 mm. 45 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£43.84
Important compatibility info
| External Thread Size | M20 x 1,5 |
| Placement on Vehicle | Front Axle Right, Front Axle Left, Wheel Side |
| Internal Teeth, wheel side | 21 |
| Seal Diameter | 52.5 mm |
| External Teeth, Wheel Side | 24 |
| Outer diameter | 75 mm |
| Length | 158 mm |
| Weight | 1.68 kg |
| Number of Teeth, ABS ring | 48 |
| Type | Joint Kit, drive shaft |
| Function | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£43.84
Important compatibility info
| Number of Connectors / Ports | 6 |
| Lock System | with double sealing |
| Operating Mode | Electric |
| Placement on Vehicle | Left Rear |
| Additional Information | with adjuster |
| Paired article numbers | 178835 |
| Weight | 0.602 kg |
| Type | Door Lock |
| Function | Door Lock |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£43.84
Important compatibility info
| Weight | 1.096 kg |
| Extra Description | ProKit |
| Function | Joint, propshaft |
| Type | Joint, propshaft |
| Bolt Hole Circle Diameter | 100 mm |
| Placement on Vehicle | Front |
| Number of Holes | 6 |
| Additional Information | with nuts |
| Additional Information 2 | with bolts/screws, with washers |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Joint, propshaft (15351)
- 3x Febi Screw (03714)
- 3x Febi Screw (09759)
- 1x Febi Assembly Kit, propshaft joint (22118)
£43.84
Important compatibility info
| Weight | 0.326 kg |
| Additional Information 2 | Requires special tools for mounting |
| Timing Chain Size | G53HC, G53HR |
| Function | Timing Chain |
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 118 |
| Type | Timing Chain |
| Replaces | 49500 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£43.84
Important compatibility info
| Lock System | with double sealing |
| Operating Mode | Electric |
| Number of Connectors / Ports | 6 |
| Placement on Vehicle | Right Rear |
| Additional Information | with adjuster |
| Paired article numbers | 178834 |
| Weight | 0.592 kg |
| Type | Door Lock |
| Function | Door Lock |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£43.84
Important compatibility info
| Placement on Vehicle | Rear Axle Right, Rear Axle Left |
| Bore Diameter | 14 mm |
| Shock Absorber Type | Gas Pressure |
| Shock Absorber System | Twin-Tube |
| Shock Absorber Design | Telescopic Shock Absorber |
| Weight | 1.720 kg |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Mounting bores distance | 516 mm |
| Max. Length | 516 mm |
| Min. Length | 319 mm |
| Pipe Diameter | 45 mm. 53 mm |
| Type | Shock Absorber |
| Function | Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£43.84
Important compatibility info
| Type | Pressure Converter, exhaust control |
| Weight | 0.130 kg |
| Function | Pressure Converter, exhaust control |
| Extra Description | febi Plus |
| Number of Connectors / Ports | 2 |
| Voltage | 12 V |
| Operating Mode | Electric-pneumatic |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£43.84
Important compatibility info
| Placement on Vehicle | Left |
| Paired article numbers | 107046 |
| Cable Length | 1150 mm |
| Number of circuits | 4 |
| Function | Cable Repair Kit, tailgate |
| for door opening angle | 270 ° |
| Extra Description | febi Plus |
| Type | Cable Repair Kit, tailgate |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£43.85
Important compatibility info
| Function | Tensioner, timing chain |
| Weight | 0.141 kg |
| Type | Tensioner, timing chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£43.85
Important compatibility info
| Weight | 0.29 kg |
| Material | Rubber/Metal |
| Height | 120 mm |
| Placement on Vehicle | Front Axle |
| Outer diameter | 150 mm |
| Inner diameter | 14 mm |
| Bolt Hole Circle Diameter | 122 mm |
| Additional Information 2 | with ball bearing |
| Type | Repair Kit, suspension strut support mount |
| Function | Repair Kit, suspension strut support mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension Strut Support Mount (12090)
- 1x Febi Rolling Bearing, suspension strut support mount (12089)
£43.85
Important compatibility info
| Weight | 4.880 kg |
| Rotor Style | Solid |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 303 mm |
| Thickness | 39.5 mm |
| Brake Disc Thickness | 10 mm |
| Minimum thickness | 8 mm |
| Bolt Hole Circle Diameter | 114.3 mm |
| Centering Diameter | 68 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
| Rim Hole Number | 5 -Hole |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£43.87
Important compatibility info
| Weight | 1.33 kg |
| Additional Information 2 | with bolts/screws |
| Outer diameter | 150 mm |
| Thickness | 39.5 mm |
| Number of Ribs | 4 |
| Parameter | 5PK |
| Type | Belt Pulley, crankshaft |
| Function | Belt Pulley, crankshaft |
| Extra Description | ProKit |
| for OE number | 55181620 S1 |
| Additional Information | with pulse generator wheel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Belt Pulley, crankshaft (44413)
- 3x Febi Pulley Bolt (33757)
£43.87
Important compatibility info
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, automatic transmission |
| Placement on Vehicle | Rear |
| Function | Mounting, automatic transmission |
| Weight | 0.920 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£43.88
Important compatibility info
| Weight | 0.027 kg |
| Length | 23 mm |
| Outer diameter | 15 mm |
| Number of Connectors / Ports | 3 |
| Type | Sensor, camshaft position |
| Function | Sensor, camshaft position |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£43.89
Important compatibility info
| Width | 69.5 mm |
| Wear Warning Contact | incl. wear warning contact |
| Type | Brake Pad Set, disc brake |
| Thickness/Strength 1 | 20 mm |
| Inspection Tag | ECE R90 Approved |
| Placement on Vehicle | Front Axle |
| Length | 174.5 mm |
| Function | Brake Pad Set, disc brake |
| Weight | 2.8 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£43.89
Important compatibility info
| Function | Suspension, propshaft |
| Weight | 0.340 kg |
| Type | Suspension, propshaft |
| Additional Information 2 | with rolling bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension, propshaft (104644)
- 1x Febi Bearing, propshaft centre bearing (05362)
£43.90
Important compatibility info
| Weight | 4.470 kg |
| Rotor Style | Solid |
| Rim Hole Number | 5 -Hole |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 278 mm |
| Thickness | 43 mm |
| Brake Disc Thickness | 9 mm |
| Minimum thickness | 8 mm |
| Bolt Hole Circle Diameter | 114.3 mm |
| Centering Diameter | 62 mm |
| Surface | Coated |
| Number of mounting bores | 2 |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£43.90
Important compatibility info
| Weight | 2.2 kg |
| Width | 37 mm |
| Outer diameter | 158 mm |
| Inner diameter | 30 mm |
| Number of Ribs | 5 |
| Parameter | 6PK |
| Function | Belt Pulley, crankshaft |
| Thickness | 27 mm |
| Additional Information 2 | with screw |
| Extra Description | ProKit |
| Type | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Belt Pulley, crankshaft (26922)
- 1x Febi Pulley Bolt (33675)
£43.91
Important compatibility info
| Outer diameter | 154 mm |
| Thickness | 34 mm |
| Inner diameter | 30 mm |
| Number of Ribs | 5 |
| Parameter | 6PK |
| Function | Belt Pulley, crankshaft |
| Type | Belt Pulley, crankshaft |
| Weight | 2.140 kg |
| Replaces | 36888 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£43.91
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Bore Diameter | 12 mm. 14 mm |
| Shock Absorber Type | Gas Pressure |
| Shock Absorber System | Twin-Tube |
| Shock Absorber Design | Telescopic Shock Absorber |
| Weight | 1.480 kg |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Mounting bores distance | 507 mm |
| Max. Length | 507 mm |
| Min. Length | 315 mm |
| Pipe Diameter | 47 mm. 38.5 mm |
| Piston conrod diameter | 12.5 mm |
| Type | Shock Absorber |
| Function | Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£43.91
Important compatibility info
| Weight | 1.564 kg |
| Material | Cast Aluminium |
| Number of Wings | 8 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Metal |
| Seal Material | Rubber/Metal |
| Type | Water Pump, engine cooling |
| Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£43.92
Important compatibility info
| Material | Cast Aluminium |
| Additional Information 2 | with seal ring, with bolts/screws |
| Weight | 1.060 kg |
| Number of Wings | 7 |
| Type | Water Pump, engine cooling |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Metal |
| Seal Material | Rubber |
Additional Information
Technical Information
To identify the correct article, the currently installed product must be determined!
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£43.92
Important compatibility info
| Type | Bush, steering knuckle |
| Outer diameter 1 | 98 mm |
| Height | 77 mm |
| Width | 98 mm |
| Length | 98 mm |
| Outer diameter 2 | 60 mm |
| Bearing Type | Needle Bearing, Thrust Bearing |
| Function | Bush, steering knuckle |
| Weight | 0.791 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£43.92
Important compatibility info
| Type | Roll-off Piston, air suspension bellows |
| Function | Roll-off Piston, air suspension bellows |
| Placement on Vehicle | Rear Axle |
| Material | Metal |
| Outer diameter | 190 mm |
| Thickness | 156 mm |
| Colour | Black |
| Internal Thread Size | M18 x 1,5 |
| Weight | 3.93 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£43.92
Important compatibility info
| Paired article numbers | 181773 |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Placement on Vehicle | Rear Axle Left |
| Weight | 1.2 kg |
| Type | Brake Caliper |
| Function | Brake Caliper |
| Brake caliper piston diameter | 42 mm |
| Material | Cast Iron |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£43.92
Important compatibility info
| Weight | 4.1 kg |
| Placement on Vehicle | Rear Axle |
| Length | 365 mm |
| Thickness | 35 mm |
| Additional Information 2 | without rubber mount(s) |
| Rod/Strut | Coupling Rod |
| Type | Link/Coupling Rod, stabiliser bar |
| Function | Link/Coupling Rod, stabiliser bar |
| for OE number | 948 326 05 47 7390 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£43.92
Important compatibility info
| Spanner Size | 22 |
| Weight | 0.102 kg |
| for OE number | 1628.8Z |
| Cable Length | 570 mm |
| Number of circuits | 4 |
| Lambda Sensor | Heated |
| Type | Oxygen Sensor |
| Function | Oxygen Sensor |
| External Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£43.93
Important compatibility info
| Weight | 0.765 kg |
| Number of Connectors / Ports | 2 |
| Additional Information | with coolant level sensor |
| Function | Expansion Tank, coolant |
| Type | Expansion Tank, coolant |
| Additional Information 2 | without lid |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£43.94
Important compatibility info
| Weight | 1.106 kg |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Placement on Vehicle | Left Front, Right Front |
| Type | Mounting, engine |
| Replaces | 05302; 05863; 05864; 05865 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£43.94
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Width | 47.5 mm |
| Outer diameter | 252 mm |
| Thickness | 53 mm |
| Inner diameter | 200 mm |
| Bolt Hole Circle Diameter | 100 mm |
| Centering Diameter | 55.1 mm |
| Weight | 4.66 kg |
| Number of mounting bores | 2 |
| Max.skimmed drum measure | 201 mm |
| Rim Hole Number | 4 -Hole |
| Type | Brake Drum |
| Function | Brake Drum |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£43.95
Important compatibility info
| Function | Expansion Tank, coolant |
| Colour | Black |
| Material | Plastic |
| Weight | 0.364 kg |
| Type | Expansion Tank, coolant |
| Additional Information 2 | without lid |
| for OE number | 17 13 7 647 281 |
| Additional Information | with coolant level sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£43.95
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Function | Brake Hose |
| External Thread Size | M10 x 1 |
| Type | Brake Hose |
| Length | 785 mm |
| Paired article numbers | 185029 |
| Weight | 0.225 kg |
| Internal Thread Size | M10 x 1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£43.95
Important compatibility info
| Weight | 1.464 kg |
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 130 |
| Timing Chain Size | G53HR |
| Type | Timing Chain Kit |
| Function | Timing Chain Kit |
| Extra Description | Full Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£43.97
Important compatibility info
| Weight | 1.481 kg |
| Material | Cast Aluminium |
| Number of Wings | 7 |
| Type | Water Pump, engine cooling |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Plastic |
| Seal Material | Rubber |
| Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£43.98
Important compatibility info
| for OE number | 7 173 046 |
| Number of Connectors / Ports | 3 |
| Function | Sensor, throttle position |
| Weight | 0.040 kg |
| Type | Sensor, throttle position |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£43.98
Important compatibility info
| Weight | 0.23 kg |
| Placement on Vehicle | transmission sided |
| Material | PTFE (polytetrafluoroethylene), ACM (Polyacrylate) |
| Outer diameter | 131 mm. 152 mm |
| Thickness | 17.3 mm |
| Inner diameter | 85 mm |
| Function | Shaft Seal, crankshaft |
| Type | Shaft Seal, crankshaft |
| Additional Information 2 | with flange |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£43.98
Important compatibility info
| Spanner Size | 22 |
| Weight | 0.091 kg |
| for OE number | 1618.R0 |
| Cable Length | 400 mm |
| Number of circuits | 4 |
| Lambda Sensor | Heated |
| Type | Oxygen Sensor |
| Function | Oxygen Sensor |
| External Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£43.98
Important compatibility info
| Brake caliper piston diameter | 38 mm |
| Placement on Vehicle | Rear Axle Left |
| Material | Cast Aluminium |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 181145 |
| Function | Brake Caliper |
| Type | Brake Caliper |
| Weight | 1.797 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£43.99
Important compatibility info
| Brake Caliper Type | Brake Caliper (1 piston) |
| Material | Cast Aluminium |
| Brake caliper piston diameter | 38 mm |
| Paired article numbers | 181144 |
| Function | Brake Caliper |
| Type | Brake Caliper |
| Weight | 1.797 kg |
| Placement on Vehicle | Rear Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£43.99
Important compatibility info
| Function | Sensor, intake manifold pressure |
| Type | Sensor, intake manifold pressure |
| Weight | 0.05 kg |
| Number of Connectors / Ports | 4 |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£43.99
Important compatibility info
| Function | Timing Chain |
| Timing Chain Size | G68VH |
| Weight | 0.42 kg |
| Number of Chain Links | 78 |
| Chain Type | Simplex, Closed chain |
| Additional Information 2 | Requires special tools for mounting |
| Type | Timing Chain |
| Placement on Vehicle | Left |
| Replaces | 40274 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£43.99
Important compatibility info
| Cable Length | 300 mm |
| Function | Sensor, exhaust gas temperature |
| Number of Connectors / Ports | 2 |
| External Thread Size | M14 x 1,5 |
| Weight | 0.039 kg |
| Type | Sensor, exhaust gas temperature |
| for OE number | 007 153 75 28 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£43.99
Important compatibility info
| Weight | 1.197 kg |
| Placement on Vehicle | Rear |
| for OE number | 46773925 |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£44.00
Important compatibility info
| Placement on Vehicle | Right Front |
| Additional Information | with electric motor |
| Operating Mode | Electric |
| Paired article numbers | 193269 |
| Weight | 1.1 kg |
| Type | Window Regulator |
| Function | Window Regulator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£44.01
Important compatibility info
| Weight | 0.51 kg |
| Placement on Vehicle | Left |
| Function | Front Cover Lock |
| Type | Front Cover Lock |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£44.02
Important compatibility info
| Number of Connectors / Ports | 3 |
| Function | Ignition Coil |
| Weight | 0.46 kg |
| Type | Ignition Coil |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£44.03
Important compatibility info
| Placement on Vehicle | Right Front |
| Weight | 1.20 kg |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£44.03
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023