Important compatibility info
Width | 19.2 mm. 21.9 mm |
Outer diameter | 53.1 mm. 63 mm |
Inner diameter | 47.7 mm |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
for OE number | 5131.A6 S2 |
Function | Repair Kit, axle beam |
Weight | 0.19 kg |
Type | Repair Kit, axle beam |
Additional Information
Technical Information
To identify the correct article, the currently installed product must be determined!
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.44 kg |
Length | 138 mm |
Width | 89 mm |
Material | Aluminium |
Thickness | 44.5 mm |
Function | Oil Cooler, engine oil |
Type | Oil Cooler, engine oil |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.6 kg |
Cooling Hose | from engine cooler to water pump |
Function | Radiator Hose |
Type | Radiator Hose |
for OE number | 74 21 700 918 |
Additional Information 2 | with clamps |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | both sides |
Length | 299 mm |
Width | 202 mm |
Material | ABS (Acrylonitrile-Butadiene-Styrene Copolymerisate) |
Thickness | 24 mm |
Voltage | 12 V |
Operating Mode | Manual |
Outer/Inner Mirror | Heatable, Convex |
Weight | 0.471 kg |
Section | Upper section |
Type | Mirror Glass, exterior mirror |
Camber Radius | 1200 mm |
Function | Mirror Glass, exterior mirror |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.55 kg |
Placement on Vehicle | Left |
Material | Cast Aluminium, Rubber/Metal |
Bearing/Mounting Type | Hydro Mount |
Function | Mounting, engine |
Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Cooling Hose | from water pipe to auxiliary water pump, from engine to engine cooler |
Weight | 0.73 kg |
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Additional Information | with quick coupling |
Placement on Vehicle | Upper |
Type | Radiator Hose |
Function | Radiator Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.430 kg |
Placement on Vehicle | inner, both sides |
Length | 114.5 mm. 175 mm |
Thickness | 71 mm. 35 mm |
Inner diameter | 20 mm. 13 mm |
Function | Mounting, control/trailing arm |
Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M18 x 1,5 |
Number of circuits | 4 |
Function | Oxygen Sensor |
Cable Length | 525 mm |
Weight | 0.44 kg |
Spanner Size | 22 |
Type | Oxygen Sensor |
Lambda Sensor | Heated |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.210 kg |
Function | Slave Cylinder, clutch |
Type | Slave Cylinder, clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 3.040 kg |
Placement on Vehicle | Front Axle Left, Lower, Front Axle Right |
Material | Sheet Steel |
Steering arm type | Control Arm |
Cone Size | 19 mm |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with coupling rod, with ball joint |
Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (02818)
- 1x Febi Ball Joint (02942)
- 1x Febi Mounting and Bolting Kit, control/trailing arm (14414)
Important compatibility info
Weight | 0.160 kg |
Function | Slave Cylinder, clutch |
Type | Slave Cylinder, clutch |
for OE number | 4F0 721 257 D |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 800 mm |
Additional Information 2 | with tensioner element |
Number of Ribs | 6 |
Operating Mode | Automatic |
Weight | 0.676 kg |
Type | V-Ribbed Belt Set |
Function | V-Ribbed Belt Set |
Belt Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Width of castor bearing surface | 25 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi V-Ribbed Belt (38250)
- 1x Febi Belt Tensioner, v-ribbed belt (181682)
Important compatibility info
Weight | 0.043 kg |
Function | Exhaust Valve |
Valve head diameter | 27 mm |
Notches / Holes Number | 3 |
Valve stem diameter | 5.96 mm |
Length | 110.5 mm |
Type | Exhaust Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Intake Valve (32185)
Important compatibility info
Weight | 3.6 kg |
Outer diameter | 281 mm |
Height | 507 mm |
Inner diameter | 147 mm |
Function | Air Filter |
Filter type | Filter Insert |
Type | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.466 kg |
Width | 39.8 mm |
Outer diameter | 54 mm |
Inner diameter | 17 mm |
Number of Ribs | 5 |
Tightening Torque | 85 Nm |
Function | Alternator Freewheel Clutch |
Type | Alternator Freewheel Clutch |
Additional Information 2 | with lid |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.707 kg |
Outer diameter | 138 mm |
Number of Holes | 4 |
Bolt Hole Circle Diameter | 124 mm |
Parameter | VL100R |
Type | Clutch, radiator fan |
Function | Clutch, radiator fan |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.09 kg |
Placement on Vehicle | Rear Axle Left, Rear |
Material | Aluminium |
Steering arm type | Control Arm |
Paired article numbers | 40364 |
Function | Control/Trailing Arm, wheel suspension |
Extra Description | ProKit |
Type | Control/Trailing Arm, wheel suspension |
Additional Information | with fastening/mounting material |
Additional Information 2 | with ball joint, with bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (28293)
- 1x Febi Screw (38199)
- 1x Febi Nut (37448)
Important compatibility info
Weight | 1.76 kg |
Material | Cast Aluminium |
Number of Wings | 6 |
Function | Water Pump, engine cooling |
Water pump impeller material | Metal |
Seal Material | Rubber/Metal |
Additional Information | with gasket/seal |
Type | Water Pump, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 85.5 mm |
External Thread Size | M22 x 1,5 |
Function | Joint Kit, drive shaft |
Type | Joint Kit, drive shaft |
Weight | 2.320 kg |
Seal Diameter | 59.5 mm |
Internal Teeth, wheel side | 33 |
External Teeth, Wheel Side | 28 |
Length | 157 mm |
Placement on Vehicle | Front Axle, Wheel Side |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Right |
Material | Aluminium |
Paired article numbers | 40363 |
Function | Control/Trailing Arm, wheel suspension |
Weight | 1.09 kg |
Steering arm type | Control Arm |
Extra Description | ProKit |
Type | Control/Trailing Arm, wheel suspension |
Additional Information | with fastening/mounting material |
Additional Information 2 | with bearing, with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (28294)
- 1x Febi Screw (38199)
- 1x Febi Nut (37448)
Important compatibility info
Placement on Vehicle | Front Axle |
Length | 348 mm |
Outer diameter | 169 mm |
Weight | 2.4 kg |
Number of Coils | 4.7 |
Type | Suspension Spring |
Function | Suspension Spring |
Wire Diameter | 13.8 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Left, Rear Axle Right, Upper |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Material | Aluminium |
Steering arm type | Trailing Arm, Control Arm |
Weight | 1.170 kg |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | Requires special tools for mounting |
Weight | 0.535 kg |
Chain Type | Simplex, with chain lock |
Number of Chain Links | 126 |
Function | Timing Chain |
Timing Chain Size | G68WN, G68V |
Type | Timing Chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with gasket/seal |
Material | Cast Aluminium |
Additional Information 2 | with seal ring |
Number of Wings | 8 |
Type | Water Pump, engine cooling |
Function | Water Pump, engine cooling |
Water pump impeller material | Metal |
Seal Material | Paper |
Weight | 1.061 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Filter type | Filter Insert |
Function | Air Filter |
Height | 485 mm |
Outer diameter | 241.5 mm |
Inner diameter | 132 mm |
Weight | 3.9 kg |
Type | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Weight | 0.512 kg |
Cooling Hose | from engine to engine cooler |
Type | Radiator Hose |
Function | Radiator Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.353 kg |
Colour | Black |
Material | PA (polyamide) |
Cooling Hose | from engine cooler to water pump |
Function | Coolant Pipe |
Type | Coolant Pipe |
Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Control Valve, camshaft adjustment |
Type | Control Valve, camshaft adjustment |
Weight | 0.177 kg |
Paired article numbers | 175429 |
Placement on Vehicle | Exhaust Side |
Number of Connectors / Ports | 2 |
Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | both sides |
Length | 480 mm |
Weight | 0.2 kg |
Housing Diameter | 28 mm |
Eject Force | 470 N |
Stroke | 167 mm |
Mounting points diameter | 16.5 mm |
Piston conrod diameter | 8 mm |
Type | Gas Spring, boot/cargo area |
Function | Gas Spring, boot/cargo area |
Housing length | 278 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.18 kg |
Function | Ignition Coil |
Number of Connectors / Ports | 4 |
Type | Ignition Coil |
Replaces | 37318 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023