Proud to be a UK-based company
Contact us
Important compatibility info
| Function | Tappet, high pressure pump |
| Weight | 0.049 kg |
| Type | Tappet, high pressure pump |
| Outer diameter | 26 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£50.84
Important compatibility info
| Voltage | 12 V |
| Number of Teeth | 9 |
| Rated Power | 0.8 kW |
| Weight | 2.9 kg |
| Type | Starter |
| Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£92.81
Important compatibility info
| Bore Diameter | 16 mm |
| Fill Medium | Brake Fluid |
| Function | Master Cylinder, clutch |
| Weight | 0.145 kg |
| Type | Master Cylinder, clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£63.15
Important compatibility info
| Function | Guide Rails Kit, timing chain |
| Type | Guide Rails Kit, timing chain |
| Weight | 0.43 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.17
Important compatibility info
| Weight | 9.6 kg |
| Placement on Vehicle | Rear Axle |
| Length | 444 mm |
| Steering arm type | Trailing Arm |
| Rod/Strut | Push Rod |
| Pipe Diameter | 48 mm |
| Mounting points diameter | 17 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Hole Spacing | 115 mm |
| Type | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£113.59
Important compatibility info
| Placement on Vehicle | Right |
| Function | Mounting, engine |
| Bearing/Mounting Type | Hydro Mount |
| Weight | 1.94 kg |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£69.47
Important compatibility info
| Cooling Hose | Turbocharger to Engine |
| Function | Radiator Hose |
| Weight | 0.047 kg |
| Material | Plastic, Rubber |
| Type | Radiator Hose |
| Additional Information | with quick coupling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£19.86
Important compatibility info
| Function | Mounting, engine |
| Placement on Vehicle | both sides |
| for OE number | 967 241 02 13 |
| Weight | 3.434 kg |
| External Thread Size | M18 x 1,5 |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.97
Important compatibility info
| Weight | 0.07 kg |
| Placement on Vehicle | Front Axle |
| Length | 67 mm |
| Width | 62 mm |
| Material | PU (Polyurethane) |
| Function | Rubber Buffer, suspension |
| Type | Rubber Buffer, suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£8.80
Important compatibility info
| Weight | 0.3 kg |
| Number of Connectors / Ports | 4 |
| Function | Ignition Coil |
| Type | Ignition Coil |
| Replaces | 22040; 24106 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£34.07
Important compatibility info
| Function | Dust Cover Kit, shock absorber |
| Type | Dust Cover Kit, shock absorber |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Weight | 0.402 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Rubber Buffer, suspension (44905)
- 2x Febi Protective Cap/Bellow, shock absorber (45893)
£23.77
Important compatibility info
| Weight | 2.4 kg |
| Placement on Vehicle | Rear Axle, Front Axle |
| Function | Repair Kit, brake caliper |
| Type | Repair Kit, brake caliper |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£33.12
Important compatibility info
| Number of mounting bores | 1 |
| Function | Brake Disc |
| Placement on Vehicle | Front Axle |
| Outer diameter | 356 mm |
| Thickness | 62.4 mm |
| Brake Disc Thickness | 34 mm |
| Minimum thickness | 31.5 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Centering Diameter | 68 mm |
| Surface | Coated |
| Type | Brake Disc Rotor |
| Rim Hole Number | 5 -Hole |
| Rotor Style | Internally Vented |
| Weight | 13.44 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.72
Important compatibility info
| Placement on Vehicle | Front Axle |
| Weight | 1.16 kg |
| Function | Brake Pad Set, disc brake |
| Thickness/Strength 1 | 17.2 mm |
| Inspection Tag | ECE R90 Approved |
| Width | 40 mm. 42 mm |
| Length | 140 mm |
| Type | Brake Pad Set, disc brake |
| Additional Information 2 | with piston clip, with anti-squeak plate |
| Model | CLIO FORFOUR FORTWO LOGAN SANDERO TWINGO |
| Manufacturer | DACIA RENAULT SMART |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.33
Important compatibility info
| Rotor Style | Solid |
| Rim Hole Number | 5 -Hole |
| Weight | 5.240 kg |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 302 mm |
| Thickness | 40.7 mm |
| Brake Disc Thickness | 11 mm |
| Minimum thickness | 9 mm |
| Bolt Hole Circle Diameter | 114.3 mm |
| Centering Diameter | 72 mm |
| Surface | Coated |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£41.37
Important compatibility info
| Additional Information | with gaskets/seals |
| Weight | 0.040 kg |
| Internal Thread Size | M14 x 1,5 |
| Function | Pump, fuel pre-supply |
| Type | Pump, fuel pre-supply |
| Replaces | 22472 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£44.11
Important compatibility info
| Placement on Vehicle | Front Axle |
| Weight | 1.233 kg |
| Outer diameter | 51 mm |
| Thickness | 110 mm |
| Function | Bush, spring eye |
| Inner diameter | 24 mm |
| Type | Bush, spring eye |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.58
Important compatibility info
| Voltage | 12 V |
| Number of Ribs | 6 |
| Pulleys | with freewheel belt pulley |
| Alternator Charge Current | 150 A |
| Belt Pulley Diameter | 53 mm |
| Weight | 6.39 kg |
| Type | Alternator |
| Function | Alternator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£163.09
Important compatibility info
| Function | Washer Fluid Pump, window cleaning |
| Voltage | 12 V |
| Number of Connectors / Ports | 2 |
| Pump Type | Mono Pump |
| Weight | 0.113 kg |
| for OE number | 28920-JD00A |
| Type | Washer Fluid Pump, window cleaning |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£29.46
Important compatibility info
| Placement on Vehicle | Left |
| Function | Mounting, manual transmission |
| Weight | 2.000 kg |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, manual transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£51.56
Important compatibility info
| Additional Information | with axle nut |
| Sealing lip material | NBR (nitrile butadiene rubber) |
| Function | Wheel Bearing Kit |
| Type | Wheel Bearing Kit |
| Inner diameter | 48 mm |
| Outer diameter | 86.5 mm |
| Width | 42 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Bearing Type | Angular Ball Bearing |
| Weight | 0.928 kg |
| Additional Information 2 | with integrated magnetic sensor ring, with ABS sensor ring, with retaining ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Wheel Bearing (174117)
- 1x Febi Circlip (174295)
£34.46
Important compatibility info
| Weight | 2.1 kg |
| Placement on Vehicle | Front Axle Left, Lower, Front |
| Material | Aluminium |
| Steering arm type | Control Arm |
| Paired article numbers | 39980 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| External Thread Size | M16 x 1,5 |
| Additional Information 2 | with ball joint, with bearing |
| Cone Size | 19 mm |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (39977)
- 1x Febi Nut (39976)
£72.30
Important compatibility info
| External Thread Size | M10 x 1 |
| Placement on Vehicle | Front Axle Right |
| Length | 475 mm |
| Spanner Size | 11 |
| Paired article numbers | 170258 |
| Thread Length | 15.5 mm. 11.4 mm |
| Type | Brake Hose |
| Function | Brake Hose |
| Weight | 0.158 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£12.60
Important compatibility info
| Weight | 11.9 kg |
| Placement on Vehicle | Rear Axle |
| Length | 600 mm |
| Steering arm type | Trailing Arm |
| Mounting points diameter | 17 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Hole Spacing | 115 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£155.17
Important compatibility info
| Weight | 0.6 kg |
| Additional Information | with gaskets/seals |
| Type | EGR Valve |
| Function | EGR Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£67.58
Important compatibility info
| Type | Sensor, coolant temperature |
| Function | Sensor, coolant temperature |
| Weight | 0.055 kg |
| Number of Connectors / Ports | 2 |
| for OE number | 003 153 84 28 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£12.36
Important compatibility info
| Weight | 0.450 kg |
| Cone Size | 16.5 mm. 11 mm |
| Mounting points diameter | 10.7 mm |
| Placement on Vehicle | Front Axle Left, Lower, Front Axle Right |
| Function | Ball Joint |
| Type | Ball Joint |
| Steering arm type | for control arm |
| Additional Information | with fastening/mounting material |
| Additionally Required Parts | 45878 |
| Additionally required parts | Screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Ball Joint (27471)
- 3x Febi Screw (24362)
- 3x Febi Nut (24361)
£13.39
Important compatibility info
| Width of castor bearing surface | 26 mm |
| Weight | 0.400 kg |
| Material | Metal |
| Outer diameter | 70 mm |
| Function | Deflection/Guide Pulley, v-ribbed belt |
| Type | Deflection/Guide Pulley, v-ribbed belt |
| Additional Information | with holder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£38.02
Important compatibility info
| Weight | 0.045 kg |
| Function | Sensor, washer fluid level |
| Type | Sensor, washer fluid level |
| Number of Connectors / Ports | 2 |
| for OE number | 140 540 00 17 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.90
Important compatibility info
| Length | 107 mm |
| Bolt Head/Nut Design | Male Torx |
| Quality/ Grade | 12.9 |
| Weight | 0.81 kg |
| Number of screws | 14 |
| Function | Cylinder Head Bolt Set |
| Screw length below head | 95 mm |
| Type | Cylinder Head Bolt Set |
| External Thread Size | M10 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 14x Febi Cylinder Head Bolt (04083)
£19.26
Important compatibility info
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 76 |
| Weight | 0.372 kg |
| Function | Chain Kit, oil pump drive |
| Type | Chain Kit, oil pump drive |
| Timing Chain Size | G53HR, G53HP |
| Wet Boiling Point | 55 °C |
| Extra Description | Basic Short Kit |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Chain, oil pump drive (25229)
- 1x Febi Chain Tensioner, oil pump drive (25180)
£86.14
Important compatibility info
| Brake Shaft Cam | S-cam |
| Placement on Vehicle | Right |
| Length | 735 mm |
| Outer diameter | 108 mm |
| Number of Teeth | 10 |
| Paired article numbers | 01340 |
| Weight | 7.965 kg |
| Type | Brake Shaft, drum brake |
| Function | Brake Shaft, drum brake |
| Screw length below head | 700 mm |
| External Thread Size | M22 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£51.70
Important compatibility info
| Weight | 0.226 kg |
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 50 |
| Timing Chain Size | G62 |
| Function | Chain Kit, oil pump drive |
| Additional Information 2 | Requires special tools for mounting |
| Type | Chain Kit, oil pump drive |
| Extra Description | Basic Short Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Chain, oil pump drive (33636)
- 1x Febi Chain Tensioner, oil pump drive (33693)
£17.08
Important compatibility info
| Weight | 0.523 kg |
| Placement on Vehicle | Rear Axle Left, Lower, inner, Rear Axle Right |
| Width | 64 mm |
| Material | Rubber/Metal |
| Outer diameter | 70 mm |
| Inner diameter | 16 mm |
| Type | Mounting, control/trailing arm |
| Function | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.08
Important compatibility info
| Function | Repair Kit, brake camshaft |
| Type | Repair Kit, brake camshaft |
| Weight | 0.9 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Holder, brake camshaft seal ring (07480)
- 2x Febi Bearing, brake camshaft (07479)
- 3x Febi Shaft Seal, brake camshaft (07481)
- 1x Febi Shaft Seal, brake camshaft (07482)
- 1x Febi Spacer, brake shaft (07485)
- 1x Febi Stop Plate, adjuster (07484)
- 1x Febi Spacer, brake shaft (07488)
- 1x Febi Spacer, brake shaft (07489)
- 1x Febi Spacer, brake shaft (07491)
- 1x Febi Spacer, brake shaft (07487)
- 2x Febi Circlip (07492)
- 1x Febi Circlip, brake shaft (07493)
- 2x Febi Grease Nipple (06533)
- 1x Febi Spacer, brake shaft (07490)
£29.63
Important compatibility info
| Function | Sensor, wheel speed |
| Placement on Vehicle | Rear Axle Left |
| Paired article numbers | 106636 |
| Number of Connectors / Ports | 2 |
| Cable Length | 1864 mm |
| Weight | 0.072 kg |
| Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£25.55
Important compatibility info
| Number of Connectors / Ports | 2 |
| Weight | 0.006 kg |
| Type | Sensor, exterior temperature |
| Function | Sensor, exterior temperature |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£45.07
Important compatibility info
| Function | Shock Absorber, driver cab suspension |
| Mounting points diameter | 14 mm |
| Shock Absorber Mounting Type | Top eye, Bottom Yoke |
| Max. Length | 429 mm |
| Operating Mode | Mechanical |
| Weight | 4.0 kg |
| Placement on Vehicle | Rear |
| Type | Shock Absorber, driver cab suspension |
| Pipe Diameter | 45 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£146.26
Important compatibility info
| Weight | 1.312 kg |
| Type | Mounting Kit, driver cab stabiliser |
| Function | Mounting Kit, driver cab stabiliser |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£71.72
Important compatibility info
| Weight | 1.209 kg |
| Function | Cylinder Head Bolt Set |
| Type | Cylinder Head Bolt Set |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Cylinder Head Bolt (02499)
- 3x Febi Cylinder Head Bolt (02322)
- 2x Febi Cylinder Head Bolt (02321)
£19.74
Important compatibility info
| Placement on Vehicle | Wheel Side, Front Axle Left, Front Axle Right |
| Thread Size | M22x1,5 |
| External Teeth, Wheel Side | 25 |
| Internal Teeth, wheel side | 30 |
| Weight | 2.076 kg |
| Number of Teeth, ABS ring | 44 |
| ABS Ring Diameter | 70 mm |
| Type | Joint Kit, drive shaft |
| Function | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£32.52
Important compatibility info
| Function | Repair Kit, brake camshaft |
| Weight | 0.786 kg |
| Type | Repair Kit, brake camshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£14.69
Important compatibility info
| Chain Type | Silent Chain, Closed chain |
| Number of Chain Links | 130 |
| Function | Timing Chain Kit |
| Type | Timing Chain Kit |
| Weight | 2.06 kg |
| for OE number | 03C 109 158 A S9 |
| Additional Information | with chain tensioner, with slide rails |
| Extra Description | Full Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (40390)
- 1x Febi Tensioner, timing chain (36484)
- 1x Febi Guide, timing chain (36085)
- 1x Febi Guide, timing chain (36224)
- 2x Febi Gear/Sprocket, camshaft (105997)
- 1x Febi Sprocket, crankshaft (107818)
- 1x Febi Gasket, timing case cover (102422)
- 1x Febi Shaft Seal, crankshaft (32471)
- 1x Febi Pulley Bolt (106509)
- 2x Febi Gasket, timing case (106575)
- 4x Febi Sliding Rail Bolts, timing chain (101126)
- 2x Febi Screw (101128)
- 2x Febi Bolt, camshaft gear (46364)
- 1x Febi Seal Ring, timing chain tensioner (171597)
- 1x Febi Ring Gear, crankshaft (171592)
£241.78
Important compatibility info
| Weight | 1.229 kg |
| Placement on Vehicle | Intake Side |
| Type | Camshaft Adjuster |
| Function | Camshaft Adjuster |
| Extra Description | febi Plus |
| Number of Teeth | 44 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£184.78
Important compatibility info
| Function | Centre Rod Assembly |
| Rod/Strut | Push Rod |
| Extra Description | ProKit |
| Cone Size | 32 mm |
| Outer diameter | 42 mm |
| Length | 1095 mm |
| External Thread Size | M27 x 1,5 |
| Weight | 9.36 kg |
| Type | Centre Rod Assembly |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Centre Rod Assembly (28274)
- 2x Febi Nut (26529)
£92.85
Important compatibility info
| Weight | 1.59 kg |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Width | 120 mm |
| Outer diameter | 120 mm |
| Thickness | 78 mm |
| Inner diameter | 22.8 mm |
| Bolt Hole Circle Diameter | 100 mm |
| Type | Wheel Hub |
| Function | Wheel Hub |
| Additional Information 2 | without wheel bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£60.14
Important compatibility info
| Weight | 4.416 kg |
| Height | 532 mm |
| Outer diameter | 265 mm |
| Inner diameter | 170 mm |
| Filter type | Filter Insert |
| Function | Air Filter |
| Type | Air Filter |
| Replaces | 35598 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£43.45
Important compatibility info
| Weight | 0.230 kg |
| Material | PP (Polypropylene) |
| Colour | White |
| Function | Expansion Tank, coolant |
| Type | Expansion Tank, coolant |
| for OE number | 1323.X6 |
| Additional Information 2 | without lid |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.90
Important compatibility info
| Weight | 0.150 kg |
| Placement on Vehicle | Rear Axle |
| Length | 60 mm |
| Width | 51 mm |
| Material | Rubber/Metal |
| Outer diameter | 60 mm |
| Thickness | 60 mm |
| Inner diameter | 26 mm |
| Function | Mounting, stabiliser bar |
| Type | Mounting, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£8.61
Important compatibility info
| Type | Mounting, engine |
| for OE number | 2 433 354 |
| Function | Mounting, engine |
| Placement on Vehicle | Right |
| Weight | 2.775 kg |
| Bearing/Mounting Type | Hydro Mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£129.56
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023