Proud to be a UK-based company
Contact us
Important compatibility info
| Weight | 2.65 kg |
| Placement on Vehicle | Rear Axle |
| Function | Gasket Set, wheel hub |
| Type | Gasket Set, wheel hub |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Ring, wheel hub (04454)
- 1x Febi Thrust Washer, external planetary gearbox (21951)
- 1x Febi Shaft Seal, wheel hub (05352)
- 1x Febi Cover Plate, dust-cover wheel bearing (21974)
£44.13
Important compatibility info
| Type | Brake Caliper |
| Placement on Vehicle | Rear Axle Left |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 179445 |
| Weight | 2.034 kg |
| Function | Brake Caliper |
| Brake caliper piston diameter | 43 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£44.13
Important compatibility info
| Type | Brake Caliper |
| Placement on Vehicle | Rear Axle Right |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 179444 |
| Weight | 2.034 kg |
| Function | Brake Caliper |
| Brake caliper piston diameter | 43 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£44.13
Important compatibility info
| Inner diameter | 12 mm |
| Length | 89 mm |
| Weight | 0.87 kg |
| Material | Metal |
| Function | Deflection/Guide Pulley, v-ribbed belt |
| Thread Length | 50 mm |
| Bolt Head/Nut Design | Male Hex |
| Outer diameter | 75 mm |
| Mounting points diameter | 12 mm |
| Width of castor bearing surface | 32.5 mm |
| Type | Deflection/Guide Pulley, v-ribbed belt |
| Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£44.13
Important compatibility info
| Weight | 0.692 kg |
| Function | Oil Cooler, automatic transmission |
| Additional Information 2 | with seal ring |
| Transmission Type | Automatic Transmission |
| Type | Oil Cooler, automatic transmission |
| Additional Information | with seal rings |
| for OE number | 02E 409 061 D S1 |
| Number of Ribs | 11 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Oil Cooler, automatic transmission (105874)
- 2x Febi Seal Ring, oil cooler (lubrication) (108877)
£44.14
Important compatibility info
| Weight | 1.80 kg |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Width | 37 mm |
| Outer diameter | 71 mm |
| Inner diameter | 30 mm |
| Number of Holes | 6 |
| Bearing Type | Angular Ball Bearing |
| Function | Wheel Bearing Kit |
| Type | Wheel Bearing Kit |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with ABS sensor ring |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£44.15
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 701 mm |
| Number of Connectors / Ports | 2 |
| Function | Sensor, wheel speed |
| Weight | 0.04 kg |
| Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£44.16
Important compatibility info
| Weight | 0.800 kg |
| Function | Cylinder Head, air compressor |
| Type | Cylinder Head, air compressor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£44.16
Important compatibility info
| Brake Caliper Type | Brake Caliper (1 piston) |
| Weight | 1.47 kg |
| Type | Brake Caliper |
| Function | Brake Caliper |
| Placement on Vehicle | Rear Axle Left |
| Material | Cast Aluminium |
| Paired article numbers | 178173 |
| Brake caliper piston diameter | 34 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£44.17
Important compatibility info
| Spanner Size | 22 |
| Weight | 0.95 kg |
| Cable Length | 450 mm |
| Number of circuits | 4 |
| Lambda Sensor | Heated |
| Type | Oxygen Sensor |
| Function | Oxygen Sensor |
| External Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£44.17
Important compatibility info
| Brake Caliper Type | Brake Caliper (1 piston) |
| Material | Cast Aluminium |
| Placement on Vehicle | Rear Axle Right |
| Paired article numbers | 178172 |
| Weight | 1.47 kg |
| Function | Brake Caliper |
| Type | Brake Caliper |
| Brake caliper piston diameter | 34 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£44.17
Important compatibility info
| Function | Shaft Seal, crankshaft |
| Type | Shaft Seal, crankshaft |
| Additional Information 2 | with flange |
| Inner diameter | 93 mm |
| Placement on Vehicle | transmission sided |
| Height | 23.5 mm. 11.8 mm |
| Material | PTFE (polytetrafluoroethylene) |
| Outer diameter | 227 mm |
| Outer diameter 1 | 159 mm |
| Weight | 0.30 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£44.17
Important compatibility info
| Placement on Vehicle | Front Axle Left, Lower |
| Material | Cast Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 34760 |
| Function | Control/Trailing Arm, wheel suspension |
| Weight | 4.0 kg |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£44.18
Important compatibility info
| Placement on Vehicle | Front Axle Right, Lower |
| Material | Cast Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 34759, 181023 |
| Weight | 4.0 kg |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£44.18
Important compatibility info
| Rim Hole Number | 5 -Hole |
| Rotor Style | Solid |
| Weight | 5.340 kg |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 286 mm |
| Thickness | 63.4 mm |
| Brake Disc Thickness | 10 mm |
| Minimum thickness | 8.5 mm |
| Bolt Hole Circle Diameter | 100 mm |
| Centering Diameter | 58 mm |
| Surface | Coated |
| Number of mounting bores | 3 |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£44.19
Important compatibility info
| Placement on Vehicle | Upper |
| Weight | 1.021 kg |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£44.19
Important compatibility info
| Placement on Vehicle | Right |
| Weight | 2.147 kg |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£44.20
Important compatibility info
| Surface | PTFE (Polytetrafluorethylene) coated |
| Weight | 0.102 kg |
| Width | 18 mm |
| Number of Teeth | 116 |
| Belts | with trapezoidal tooth profile |
| Function | Timing Belt |
| Type | Timing Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£44.22
Important compatibility info
| Length | 117 mm |
| Voltage | 11 V |
| Spanner Size | 12 |
| Weight | 0.04 kg |
| Fitting Depth | 30 mm |
| Glow Plug Type | after-glow capable |
| Type | Glow Plug |
| Function | Glow Plug |
| External Thread Size | M10 x 1,25 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£44.23
Important compatibility info
| Function | Oil Cooler, engine oil |
| Weight | 0.619 kg |
| Type | Oil Cooler, engine oil |
| Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£44.24
Important compatibility info
| Weight | 1.34 kg |
| Placement on Vehicle | Front Axle Right |
| Length | 335 mm |
| Thickness | 120 mm |
| Paired article numbers | 44717 |
| Function | Tie Rod |
| Extra Description | ProKit |
| External Thread Size | M14 x 1,5, M16 x 1,5 |
| Type | Tie Rod |
| Additional Information 2 | with nut, with clamps, with steering bellow |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Tie Rod (44670)
- 1x Febi Bellow Kit, steering (43550)
£44.25
Important compatibility info
| Weight | 0.078 kg |
| Number of Connectors / Ports | 3 |
| Function | Sensor, switch module |
| Additional Information 2 | with seal ring |
| Type | Sensor, switch module |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£44.26
Important compatibility info
| Mounting points diameter | 21 mm |
| Function | Mounting, control/trailing arm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Length | 151 mm |
| Outer diameter | 84 mm |
| Weight | 2.545 kg |
| Type | Mounting, control/trailing arm |
| Hole Spacing | 115 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£44.27
Important compatibility info
| Rim Hole Number | 5 -Hole |
| Rotor Style | Internally Vented |
| Weight | 6.1 kg |
| Placement on Vehicle | Front Axle |
| Outer diameter | 276 mm |
| Thickness | 43 mm |
| Brake Disc Thickness | 24.4 mm |
| Minimum thickness | 22 mm |
| Bolt Hole Circle Diameter | 100 mm |
| Centering Diameter | 82 mm |
| Surface | Coated |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£44.28
Important compatibility info
| Length | 51.5 mm |
| Outer diameter | 31 mm |
| Weight | 0.119 kg |
| Function | Centering Sleeve, propshaft |
| Type | Centering Sleeve, propshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£44.28
Important compatibility info
| Weight | 1.79 kg |
| Placement on Vehicle | Left |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, manual transmission |
| Type | Mounting, manual transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£44.28
Important compatibility info
| Housing length | 276 mm |
| Function | Gas Spring, boot/cargo area |
| Type | Gas Spring, boot/cargo area |
| Piston conrod diameter | 8 mm |
| Mounting points diameter | 17.7 mm |
| Stroke | 190 mm |
| Eject Force | 400 N |
| Housing Diameter | 18 mm |
| Weight | 0.2 kg |
| Length | 492 mm |
| Placement on Vehicle | both sides |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£44.28
Important compatibility info
| Weight | 0.880 kg |
| Placement on Vehicle | Right |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
| for OE number | 8631698 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£44.29
Important compatibility info
| Weight | 0.650 kg |
| Function | Parts Set, maintenance service |
| Type | Parts Set, maintenance service |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Fuel filter set (103523)
- 1x Febi Oil Filter (35351)
- 1x Febi Gasket, centrifugal cleaner flange (35616)
- 1x Febi Gasket, centrifugal cleaner flange (35622)
- 1x Febi Seal Ring, oil drain plug (35640)
- 1x Febi Gasket, manual transmission housing (103728)
- 1x Febi Seal Ring (35619)
- 1x Febi Oil Filter (172138)
£44.29
Important compatibility info
| Length | 135 mm |
| Width | 85 mm |
| Function | Thermostat, coolant |
| Thickness | 76 mm |
| Opening Temperature | 87 °C |
| Weight | 0.355 kg |
| Type | Thermostat, coolant |
| Additional Information | with temperature sensor, with gasket/seal |
| Housing Type | with housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£44.29
Important compatibility info
| Function | Sensor, exhaust gas temperature |
| Cable Length | 380 mm |
| Type | Sensor, exhaust gas temperature |
| Number of Connectors / Ports | 2 |
| Weight | 0.047 kg |
| External Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£44.29
Important compatibility info
| Function | Hydraulic Filter, automatic transmission |
| Type | Hydraulic Filter, automatic transmission |
| Weight | 0.120 kg |
| Outer diameter | 58 mm |
| Filter type | Filter Insert |
| Height | 106 mm |
| Additional Information 2 | with lid, with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£44.30
Important compatibility info
| Weight | 0.024 kg |
| Number of Connectors / Ports | 4 |
| Function | Sensor, intake manifold pressure |
| Type | Sensor, intake manifold pressure |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£44.30
Important compatibility info
| Weight | 0.973 kg |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Plastic |
| Outer diameter | 70 mm |
| Operating Mode | Automatic |
| Type | Belt Tensioner, v-ribbed belt |
| Width of castor bearing surface | 27 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£44.31
Important compatibility info
| Inner diameter | 51 mm |
| Additional Information 2 | with guide sleeve |
| Outer diameter | 58 mm |
| Type | Needle Bearing, axle beam |
| Function | Needle Bearing, axle beam |
| Weight | 0.24 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£44.31
Important compatibility info
| Inner diameter | 17 mm |
| Number of Ribs | 5 |
| Function | Alternator Freewheel Clutch |
| Width | 40.3 mm |
| Outer diameter | 57 mm |
| Weight | 0.480 kg |
| Additional Information 2 | with lid |
| Type | Alternator Freewheel Clutch |
| for OE number | 37322-2A000 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£44.31
Important compatibility info
| Placement on Vehicle | Rear, both sides |
| Cable Length | 200 mm |
| Number of circuits | 12 |
| Function | Cable Repair Set, door |
| Extra Description | febi Plus |
| Type | Cable Repair Set, door |
| Additional Information | with squeeze connector |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£44.32
Important compatibility info
| Length | 67 mm |
| Width | 70 mm |
| Thickness | 67 mm |
| Weight | 0.75 kg |
| Inner diameter | 16 mm |
| Placement on Vehicle | Lower, Front Axle Left, Rear, Front Axle Right |
| Outer diameter | 70.5 mm |
| Material | Rubber/Metal |
| Function | Mounting, control/trailing arm |
| Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£44.32
Important compatibility info
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, engine |
| Placement on Vehicle | Rear |
| Weight | 1.100 kg |
| Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£44.33
Important compatibility info
| Material | FPM (fluoride rubber) |
| Function | Gasket Set, cylinder head cover |
| Weight | 0.282 kg |
| Type | Gasket Set, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£44.33
Important compatibility info
| Outer diameter | 192 mm |
| Type | Roll-off Piston, air suspension bellows |
| Colour | Black |
| Function | Roll-off Piston, air suspension bellows |
| Weight | 4.3 kg |
| Thickness | 201 mm |
| Inner diameter | 13 mm |
| Placement on Vehicle | Rear Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£44.33
Important compatibility info
| Function | Bellow Kit, drive shaft |
| Type | Bellow Kit, drive shaft |
| Joint Type | CV Joint |
| Weight | 0.164 kg |
| Inner diameter 2 | 74 mm |
| Inner diameter 1 | 23 mm |
| Material | Thermoplastic polyester elastomer |
| Length | 115 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow Kit, drive shaft (37086)
- 1x Febi Molybdenum Grease (02582)
£44.34
Important compatibility info
| Function | Mounting, engine |
| Weight | 1.32 kg |
| Bearing/Mounting Type | Hydro Mount |
| Placement on Vehicle | both sides |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£44.34
Important compatibility info
| Bearing/Mounting Type | Rubber-Metal Mount |
| Colour | Blue |
| Weight | 0.930 kg |
| Placement on Vehicle | Left |
| Type | Mounting, engine |
| Function | Mounting, engine |
| for OE number | 56 84 651 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£44.35
Important compatibility info
| Placement on Vehicle | Left |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Weight | 1.710 kg |
| Type | Mounting, engine |
| Additional Information 2 | with splash protection cover |
| Replaces | 22958 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£44.35
Important compatibility info
| Weight | 1.13 kg |
| Placement on Vehicle | Front Axle |
| Material | Rubber/Metal |
| Function | Suspension Strut Support Mount |
| Type | Suspension Strut Support Mount |
| Additional Information 2 | without ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£44.35
Important compatibility info
| Function | Ignition Coil |
| Weight | 0.200 kg |
| Type | Ignition Coil |
| Number of Connectors / Ports | 4 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£44.35
Important compatibility info
| Additional Information | with nuts |
| Outer diameter | 128 mm |
| Thickness | 20 mm |
| Additional Information 2 | with bolts/screws, with washers |
| Inner diameter | 41 mm |
| Placement on Vehicle | Front and Rear |
| Bolt Hole Circle Diameter | 90 mm |
| Function | Joint, propshaft |
| Extra Description | ProKit |
| Type | Joint, propshaft |
| Weight | 0.9 kg |
| Number of Holes | 6 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Joint, propshaft (07543)
- 6x Febi Bolt, drive shaft flange (04678)
- 1x Febi Assembly Kit, propshaft joint (22117)
£44.35
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Length | 1020 mm |
| Number of Connectors / Ports | 2 |
| Function | Sensor, wheel speed |
| Weight | 0.07 kg |
| Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£44.35
Important compatibility info
| Type | Oxygen Sensor |
| Function | Oxygen Sensor |
| Number of circuits | 4 |
| Lambda Sensor | Heated |
| Placement on Vehicle | Rear, Left, Front |
| External Thread Size | M18 x 1,5 |
| Cable Length | 450 mm |
| Weight | 0.08 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£44.35
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023