Important compatibility info
Function | Thermostat, coolant |
Length | 250 mm |
Width | 130 mm |
Thickness | 180 mm |
Opening Temperature | 92 °C |
Weight | 0.340 kg |
Type | Thermostat, coolant |
Additional Information | with gasket/seal |
Additional Information 2 | with Temperature Switch |
Housing Type | with housing |
for OE number | 611 200 06 15 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Steering arm type | Control Arm |
Weight | 2.820 kg |
Paired article numbers | 180645 |
Function | Control/Trailing Arm, wheel suspension |
Material | Sheet Steel |
Additional Information 2 | with ball joint |
Placement on Vehicle | Front Axle Left |
Type | Control/Trailing Arm, wheel suspension |
Cone Size | 17.5 mm |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.38 kg |
Function | Wheel Bearing Kit |
Bolt Hole Circle Diameter | 112 mm |
Width | 69.4 mm |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Bearing Type | Angular Ball Bearing |
Number of Holes | 5 |
Inner diameter | 32 mm |
Outer diameter | 130.9 mm |
Type | Wheel Bearing Kit |
Additional Information | with fastening/mounting material |
Additional Information 2 | Wheel Bearing integrated into wheel hub |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Inner diameter | 8 mm |
Function | Deflection/Guide Pulley, v-ribbed belt |
Type | Deflection/Guide Pulley, v-ribbed belt |
Weight | 0.202 kg |
Width of castor bearing surface | 24 mm |
Material | Plastic |
Outer diameter | 70 mm |
Mounting points diameter | 8 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.250 kg |
Material | Metal |
Thickness | 1.57 mm |
Number of Holes | 2 |
Function | Gasket, cylinder head |
Type | Gasket, cylinder head |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Brake Caliper |
Placement on Vehicle | Rear Axle Left |
Material | Cast Iron |
Brake Caliper Type | Brake Caliper (1 piston) |
Paired article numbers | 178156 |
Weight | 2.55 kg |
Function | Brake Caliper |
Brake caliper piston diameter | 44 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.16 kg |
Function | Relay, glow plug system |
Number of Connectors / Ports | 5 |
Type | Relay, glow plug system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.645 kg |
Length | 392 mm. 260 mm |
Colour | Black |
Eject Force | 570 N |
Function | Shock Absorber, steering |
Placement on Vehicle | Front Axle |
Type | Shock Absorber, steering |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.2 kg |
Width | 37 mm |
Outer diameter | 158 mm |
Inner diameter | 30 mm |
Number of Ribs | 5 |
Parameter | 6PK |
Function | Belt Pulley, crankshaft |
Thickness | 27 mm |
Additional Information 2 | with screw |
Extra Description | ProKit |
Type | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Belt Pulley, crankshaft (26922)
- 1x Febi Pulley Bolt (33675)
Important compatibility info
Rotor Style | Internally Vented |
Rim Hole Number | 4 -Hole |
Weight | 5.1 kg |
Placement on Vehicle | Front Axle |
Outer diameter | 256 mm |
Thickness | 41 mm |
Brake Disc Thickness | 24 mm |
Minimum thickness | 21 mm |
Bolt Hole Circle Diameter | 100 mm |
Centering Diameter | 60 mm |
Surface | Coated |
Number of mounting bores | 1 |
Function | Brake Disc |
Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.000 kg |
Placement on Vehicle | Lower Right |
Bearing/Mounting Type | Rubber-Metal Mount |
Type | Mounting, engine |
Function | Mounting, engine |
for OE number | 31430510 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Left |
Paired article numbers | 107046 |
Cable Length | 1150 mm |
Number of circuits | 4 |
Function | Cable Repair Kit, tailgate |
for door opening angle | 270 ° |
Extra Description | febi Plus |
Type | Cable Repair Kit, tailgate |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Cable Pull, manual transmission |
Paired article numbers | 179904 |
Weight | 0.552 kg |
Placement on Vehicle | Left |
Inner length 1 | 882 mm |
Type | Cable Pull, manual transmission |
Outer length 1 | 1233 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.458 kg |
Placement on Vehicle | Rear Axle |
Width | 30 mm |
Outer diameter | 210 mm |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 4 mm |
Type | Brake Shoe Set |
Function | Brake Shoe Set |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Paired article numbers | 179817 |
Type | Cable Pull, manual transmission |
Function | Cable Pull, manual transmission |
Weight | 0.524 kg |
Placement on Vehicle | Right |
Outer length 1 | 1219 mm |
Inner length 1 | 918 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.27 kg |
Housing Type | with housing |
Material | Plastic |
Number of Connectors / Ports | 2 |
Opening Temperature | 83 °C |
Function | Thermostat, coolant |
Type | Thermostat, coolant |
for OE number | 1336.X2 |
Additional Information | with gasket/seal |
Additional Information 2 | with Temperature Switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle |
Minimum thickness | 10 mm |
Bolt Hole Circle Diameter | 112 mm |
Centering Diameter | 65 mm |
Surface | Coated |
Type | Brake Disc Rotor |
Function | Brake Disc |
Outer diameter | 282 mm |
Thickness | 48.3 mm |
Number of mounting bores | 1 |
Brake Disc Thickness | 12 mm |
Rim Hole Number | 5 -Hole |
Rotor Style | Solid |
Weight | 4.76 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 4.960 kg |
Rim Hole Number | 5 -Hole |
Rotor Style | Solid |
Placement on Vehicle | Rear Axle |
Outer diameter | 284 mm |
Thickness | 55.4 mm |
Brake Disc Thickness | 10 mm |
Minimum thickness | 8.4 mm |
Bolt Hole Circle Diameter | 114.3 mm |
Centering Diameter | 76 mm |
Surface | Coated |
Number of mounting bores | 3 |
Type | Brake Disc Rotor |
Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Bearing/Mounting Type | Rubber-Metal Mount |
Type | Mounting, automatic transmission |
Placement on Vehicle | Rear |
Function | Mounting, automatic transmission |
Weight | 0.920 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle |
Length | 214.1 mm |
Width | 88.7 mm |
Additional Information 2 | with staples |
Wear Warning Contact | prepared for wear warning indicator |
Inspection Tag | ECE R90 Approved |
Weight | 3.635 kg |
Thickness/Strength 1 | 16.5 mm |
Type | Brake Pad Set, disc brake |
Function | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023