Important compatibility info
Function | Cable Repair Kit, tailgate |
Paired article numbers | 107047 |
Cable Length | 1250 mm |
Number of circuits | 7 |
Placement on Vehicle | Right |
Extra Description | febi Plus |
Type | Cable Repair Kit, tailgate |
for door opening angle | 270 ° |
Additional Information | with squeeze connector |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with gasket/seal |
Additional Information 2 | with Temperature Switch |
Housing Type | with housing |
Outer diameter | 54 mm |
Opening Temperature | 100 °C |
Type | Thermostat, coolant |
Function | Thermostat, coolant |
Weight | 0.36 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.16 kg |
Wear Warning Contact | prepared for wear warning indicator |
Placement on Vehicle | Rear Axle |
Length | 123 mm |
Function | Brake Pad Set, disc brake |
Thickness/Strength 1 | 17 mm |
Colour | Black |
Inspection Tag | ECE R90 Approved |
Width | 58.2 mm. 59.2 mm |
Type | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Spanner Size | 22 |
Weight | 0.001 kg |
Cable Length | 370 mm |
Number of circuits | 4 |
Function | Oxygen Sensor |
External Thread Size | M18 x 1,5 |
Type | Oxygen Sensor |
Lambda Sensor | Heated |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Cable Length | 600 mm |
Number of circuits | 11 |
Function | Cable Repair Set, boot lid |
Extra Description | febi Plus |
Type | Cable Repair Set, boot lid |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.280 kg |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Material | Steel |
Outer diameter | 107 mm |
Inner diameter | 74 mm |
Number of Teeth, ABS ring | 52 |
Type | Sensor Ring, ABS |
Function | Sensor Ring, ABS |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 4.742 kg |
Placement on Vehicle | Rear Axle |
Outer diameter | 296 mm |
Thickness | 57.6 mm |
Brake Disc Thickness | 10 mm |
Minimum thickness | 8 mm |
Bolt Hole Circle Diameter | 112 mm |
Centering Diameter | 67 mm |
Surface | Coated |
Number of mounting bores | 1 |
Function | Brake Disc |
Rim Hole Number | 5 -Hole |
Rotor Style | Solid |
Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.038 kg |
Placement on Vehicle | Rear Axle Left |
Length | 530 mm |
Paired article numbers | 104219 |
Number of Connectors / Ports | 2 |
Function | Sensor, wheel speed |
Type | Sensor, wheel speed |
Cable Length | 455 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.94 kg |
Outer diameter | 280 mm |
Operating Mode | Electric |
Number of Connectors / Ports | 3 |
Rated Power | 150 W, 80 W |
Number of Wings | 4 |
Function | Fan, engine cooling |
Type | Fan, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Extra Description | ProKit |
Material | Aluminium |
Additional Information 2 | with ball joint, with rubber mount |
Steering arm type | Control Arm |
Paired article numbers | 173717 |
Weight | 1.190 kg |
Cone Size | 20.4 mm |
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Placement on Vehicle | Front Axle Left |
External Thread Size | M14 x 1,5 |
Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | with ball joint, with rubber mount |
Material | Aluminium |
Function | Control/Trailing Arm, wheel suspension |
Cone Size | 20.4 mm |
Additional Information | with fastening/mounting material |
Type | Control/Trailing Arm, wheel suspension |
External Thread Size | M14 x 1,5 |
Extra Description | ProKit |
Steering arm type | Control Arm |
Paired article numbers | 173718 |
Weight | 1.190 kg |
Placement on Vehicle | Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Connectors / Ports | 2 |
Function | Sensor, coolant temperature |
Weight | 0.104 kg |
for OE number | 1 865 317 |
Type | Sensor, coolant temperature |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.067 kg |
Placement on Vehicle | Rear Axle Right |
Paired article numbers | 173738 |
Number of Connectors / Ports | 2 |
Cable Length | 1695 mm |
Type | Sensor, wheel speed |
Function | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | with retaining strap, with seal ring |
Weight | 0.242 kg |
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber), PA (polyamide) |
Cooling Hose | from engine cooler to water pump |
Function | Coolant Pipe |
Extra Description | febi Plus |
Type | Coolant Pipe |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.042 kg |
Length | 765 mm |
Function | Sensor, wheel speed |
Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Adjustable | adjustable |
Cone Size | 16 mm |
Weight | 0.9 kg |
Paired article numbers | 188256 |
Placement on Vehicle | Front Axle Left |
External Thread Size | M20 x 1,5, M14 x 1,5 |
Cone Size 2 | 22 mm |
Function | Tie Rod |
Type | Tie Rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Tie Rod End (186128)
- 1x Febi Inner Tie Rod (180054)
Important compatibility info
Placement on Vehicle | Front Axle |
Thread Size | M10x1,5 |
Internal Teeth, wheel side | 33 |
Weight | 2.190 kg |
Type | Joint Kit, drive shaft |
Function | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Colour | Blue |
Material | Plastic |
Type | Sealing Cap, tank unit (Urea injection) |
Weight | 0.06 kg |
Function | Sealing Cap, tank unit (Urea injection) |
Additional Information 2 | with support strap |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M20 x 1,5, M14 x 1,5 |
Weight | 0.9 kg |
Cone Size | 16 mm |
Adjustable | adjustable |
Type | Tie Rod |
Function | Tie Rod |
Cone Size 2 | 22 mm |
Paired article numbers | 188255 |
Placement on Vehicle | Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Tie Rod End (186129)
- 1x Febi Inner Tie Rod (180054)
Important compatibility info
Function | Mounting, manual transmission |
Bearing/Mounting Type | Rubber-Metal Mount |
Placement on Vehicle | Left |
Type | Mounting, manual transmission |
Weight | 1.6 kg |
for OE number | 98 066 589 80 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Joint Kit, drive shaft |
Thread Size | M16x1,5 |
Weight | 2.554 kg |
Type | Joint Kit, drive shaft |
Internal Teeth, wheel side | 28 |
External Teeth, Wheel Side | 36 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 135 mm |
Outer diameter | 48 mm |
Function | Joint, propshaft |
Type | Joint, propshaft |
Weight | 2.530 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.4 kg |
Opening Temperature | 86 °C |
Type | Thermostat, coolant |
Function | Thermostat, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Repair Kit, adjuster |
Weight | 0.540 kg |
Type | Repair Kit, adjuster |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Deflection/Guide Pulley, v-ribbed belt |
Material | Plastic |
Width of castor bearing surface | 50 mm |
Outer diameter | 95 mm |
Weight | 0.339 kg |
Type | Deflection/Guide Pulley, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Teeth, Wheel Side | 30 |
Outer diameter | 94 mm |
Length | 163 mm |
Function | Joint Kit, drive shaft |
Placement on Vehicle | Wheel Side, Front Axle Left, Front Axle Right |
Type | Joint Kit, drive shaft |
Weight | 2.670 kg |
Internal Teeth, wheel side | 36 |
Seal Diameter | 85.6 mm |
External Thread Size | M22 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with gaskets/seals |
Weight | 0.635 kg |
Number of Wings | 6 |
Type | Water Pump, engine cooling |
Function | Water Pump, engine cooling |
Water pump impeller material | Metal |
Seal Material | Rubber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 3.182 kg |
Function | Brake Shaft, drum brake |
Screw length below head | 195 mm |
External Thread Size | M22 x 1,5 |
Type | Brake Shaft, drum brake |
Number of Teeth | 10 |
Outer diameter | 108 mm |
Length | 259 mm |
Placement on Vehicle | Left |
Brake Shaft Cam | S-cam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle |
Weight | 1.987 kg |
Type | Repair Kit, guide strut |
Function | Repair Kit, guide strut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Width | 24 mm |
Number of Teeth | 194 |
Surface | Coated |
Belts | with trapezoidal tooth profile |
Function | Timing Belt |
Weight | 0.188 kg |
Type | Timing Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Wheel Side |
Length | 141 mm |
Outer diameter | 73 mm |
External Teeth, Wheel Side | 26 |
Seal Diameter | 55.6 mm |
Internal Teeth, wheel side | 19 |
Weight | 1.660 kg |
Type | Joint Kit, drive shaft |
Function | Joint Kit, drive shaft |
External Thread Size | M22 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Metal |
Function | Gasket Set, cylinder head cover |
Weight | 0.059 kg |
Type | Gasket Set, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.545 kg |
Material | Cast Aluminium |
Number of Wings | 20 |
Function | Water Pump, engine cooling |
Water pump impeller material | Plastic |
Seal Material | Rubber/Metal |
Additional Information | with gasket/seal |
Type | Water Pump, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.525 kg |
Material | Sheet Steel |
Steering arm type | Control Arm |
Paired article numbers | 14244 |
Placement on Vehicle | Front Axle Right, Lower |
Function | Control/Trailing Arm, wheel suspension |
Additional Information | with rubber mounts |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with ball joint |
Replaces | 06534 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 4.085 kg |
Height | 464 mm |
Outer diameter | 309 mm |
Inner diameter | 180 mm |
Filter type | Filter Insert |
Type | Air Filter |
Function | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 772 mm |
Outer diameter | 8.4 mm |
Inner diameter | 4.1 mm |
Pressure | 240 bar |
Function | Hose Line, driver cab tilting device |
External Thread Size | M12 x 1,5 |
Type | Hose Line, driver cab tilting device |
Weight | 0.20 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.5251 kg |
Material | Sheet Steel |
Steering arm type | Control Arm |
Paired article numbers | 14243 |
Placement on Vehicle | Front Axle Left, Lower |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with ball joint |
Replaces | 06527 |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | ACM (Polyacrylate) |
Weight | 0.23 kg |
Type | Gasket, cylinder head cover |
Function | Gasket, cylinder head cover |
for OE number | 471 016 01 21 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.435 kg |
Material | Metal |
Outer diameter | 70 mm |
Function | Tensioner Pulley, v-ribbed belt |
Type | Tensioner Pulley, v-ribbed belt |
Additional Information | with holder |
Width of castor bearing surface | 26 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle |
Weight | 0.150 kg |
Type | Dust Cover Kit, shock absorber |
Function | Dust Cover Kit, shock absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Rubber Buffer, suspension (36818)
- 2x Febi Protective Cap/Bellow, shock absorber (182702)
Important compatibility info
Colour | Orange |
Rated Power | 36 W |
Cable Length | 1500 mm |
Voltage from | 9 V |
Number of circuits | 4 |
Voltage to | 30 V |
Protection Type (IP Code) | IP67 |
Fulfils ECE norm | R10, R65 |
Housing material | Aluminium |
Temperature range from | -40 °C |
Temperature range to | 65 °C |
Function | Strobe-type Beacon |
Weight | 0.157 kg |
Inspection Tag | EMC, SAE |
Height | 44 mm |
Light Design | LED |
Width | 122 mm |
Depth | 11 mm |
Type | Strobe-type Beacon |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | with seal ring |
Weight | 0.025 kg |
Opening Temperature | 75 °C |
Type | Thermostat, coolant |
Function | Thermostat, coolant |
Outer diameter | 25 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.400 kg |
Cone Size | 26 mm |
Placement on Vehicle | Front Axle |
Additional Information | with lock nut |
Length | 135 mm |
Type | Tie Rod End |
Function | Tie Rod End |
Extra Description | ProKit |
External Thread Size | M30 x 1,5 |
Internal Thread Size | M20 x 1,5 |
Spanner Size | 30 |
Thread Type | with right-hand thread |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.95 kg |
Function | Repair Kit, brake camshaft |
Replaces | 09211 |
Type | Repair Kit, brake camshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber), PA (polyamide) |
Extra Description | febi Plus |
Additional Information 2 | with retaining strap |
Weight | 0.228 kg |
Function | Coolant Pipe |
Cooling Hose | from engine cooler to water pump |
Type | Coolant Pipe |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Aluminium |
Function | Oil Cooler, engine oil |
Weight | 0.42 kg |
Type | Oil Cooler, engine oil |
Core Depth | 54 mm |
Core Width | 90 mm |
Core Length | 90 mm |
Inner diameter | 20 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Spanner Size | 22 |
Weight | 0.086 kg |
Cable Length | 460 mm |
Number of circuits | 4 |
Lambda Sensor | Heated |
Type | Oxygen Sensor |
Function | Oxygen Sensor |
External Thread Size | M18 x 1,5 |
for OE number | 226A0-JA10C |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Connectors / Ports | 3 |
Weight | 0.068 kg |
Function | Sensor, crankshaft pulse |
Length | 512 mm |
Type | Sensor, crankshaft pulse |
Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Repair Kit, suspension strut support mount |
Weight | 0.399 kg |
Type | Repair Kit, suspension strut support mount |
Additional Information 2 | with ball bearing |
Material | Rubber/Metal |
Placement on Vehicle | Front Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension Strut Support Mount (180527)
- 1x Febi Rolling Bearing, suspension strut support mount (179221)
Important compatibility info
Weight | 0.430 kg |
Placement on Vehicle | Lower, Rear |
Material | Aluminium, Rubber/Metal |
Bearing/Mounting Type | Rubber-Metal Mount |
Function | Mounting, engine |
Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023