Proud to be a UK-based company
Contact us
Important compatibility info
| Type | Water Pump, engine cooling |
| Weight | 1.45 kg |
| Function | Water Pump, engine cooling |
| Seal Material | Rubber |
| Water pump impeller material | Plastic |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£46.51
Important compatibility info
| Weight | 0.365 kg |
| Width | 27 mm |
| Outer diameter | 73 mm |
| Inner diameter | 8 mm |
| Function | Tensioner Pulley, timing belt |
| Type | Tensioner Pulley, timing belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£46.51
Important compatibility info
| Spanner Size | 22 |
| Weight | 0.116 kg |
| Cable Length | 300 mm |
| Number of circuits | 4 |
| Lambda Sensor | Heated |
| Type | Oxygen Sensor |
| Function | Oxygen Sensor |
| External Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£46.52
Important compatibility info
| Spanner Size | 22 |
| Weight | 0.130 kg |
| Cable Length | 920 mm |
| Number of circuits | 4 |
| Lambda Sensor | Heated |
| Type | Oxygen Sensor |
| Function | Oxygen Sensor |
| External Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£46.52
Important compatibility info
| Function | Drive Shaft |
| Bolt Hole Circle Diameter | 86.15 mm |
| Paired article numbers | 180918 |
| Min. Length | 522 mm |
| Number of mounting bores | 6 |
| Bore Diameter | 8.55 mm |
| External Teeth, Wheel Side | 36 |
| Weight | 5.482 kg |
| Thread Size | M16x1,5 |
| Additional Information 2 | with screw |
| Additional Information | with grease |
| Placement on Vehicle | Front Axle Left |
| Type | Drive Shaft |
| Transmission-side joint diameter | 99.9 mm |
| Wheel Sided Joint Diameter | 90 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£46.52
Important compatibility info
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Weight | 3.5 kg |
| Additional Information 2 | with bearing, with ball joint |
| Steering arm type | Control Arm |
| Paired article numbers | 41232 |
| Additional Information | with lock nut |
| Placement on Vehicle | Front Axle Left |
| Material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£46.52
Important compatibility info
| Weight | 0.555 kg |
| Paired article numbers | 196813 |
| Number of Connectors / Ports | 2 |
| Placement on Vehicle | Rear Axle Right |
| Type | Control Element, parking brake caliper |
| Extra Description | febi Plus |
| Function | Control Element, parking brake caliper |
| Number of Teeth | 6 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£46.53
Important compatibility info
| Placement on Vehicle | Right |
| Material | Rubber/Metal, Aluminium |
| Colour | Green |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Weight | 1.351 kg |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£46.54
Important compatibility info
| Placement on Vehicle | Rear Axle Right, Rear Axle Left |
| Bore Diameter | 12 mm. 15 mm |
| Shock Absorber Type | Gas Pressure |
| Shock Absorber System | Twin-Tube |
| Shock Absorber Design | Telescopic Shock Absorber |
| Weight | 1.690 kg |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Mounting bores distance | 481 mm |
| Max. Length | 481 mm |
| Min. Length | 304 mm |
| Pipe Diameter | 53 mm. 45 mm |
| Type | Shock Absorber |
| Function | Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£46.54
Important compatibility info
| Additional Information | with gasket/seal, with oil filter |
| Weight | 0.810 kg |
| Type | Housing, oil filter |
| Function | Housing, oil filter |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£46.55
Important compatibility info
| Material | Sheet Steel |
| Cone Size | 17.3 mm |
| Additional Information 2 | with ball joint |
| Additional Information | with rubber mounts, with lock nut |
| Placement on Vehicle | Front Axle Left, Lower |
| Steering arm type | Control Arm |
| External Thread Size | M12 x 1,5 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Weight | 3.900 kg |
| Paired article numbers | 06158 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Mounting, control/trailing arm (03142)
£46.56
Important compatibility info
| Weight | 1.710 kg |
| Replaces | 22956 |
| Placement on Vehicle | Right |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£46.56
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Outer diameter | 276 mm |
| Thickness | 60.2 mm |
| Brake Disc Thickness | 19 mm |
| Minimum thickness | 17.4 mm |
| Bolt Hole Circle Diameter | 120 mm |
| Centering Diameter | 75 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Function | Brake Disc |
| Type | Brake Disc Rotor |
| Weight | 5.28 kg |
| Rotor Style | Internally Vented |
| Rim Hole Number | 5 -Hole |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£46.57
Important compatibility info
| Function | Brake Master Cylinder |
| Outer diameter | 22.2 mm |
| Weight | 1.25 kg |
| Type | Brake Master Cylinder |
| for OE number | 4601.E4 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£46.58
Important compatibility info
| Placement on Vehicle | behind exhaust turbocharger |
| Number of Connectors / Ports | 2 |
| Weight | 0.05 kg |
| for OE number | 03L 906 088 AG |
| Type | Sensor, exhaust gas temperature |
| Function | Sensor, exhaust gas temperature |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£46.59
Important compatibility info
| Function | Oil Cooler, engine oil |
| Weight | 0.749 kg |
| Type | Oil Cooler, engine oil |
| Additional Information | with gaskets/seals |
| for OE number | 11 42 8 510 856 S1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Oil Cooler, engine oil (105940)
- 1x Febi Gasket Set, oil cooler (105944)
£46.59
Important compatibility info
| Weight | 1.741 kg |
| Placement on Vehicle | Lower, Front Axle Left, Rear |
| Material | Aluminium |
| Outer diameter | 29 mm |
| Steering arm type | Control Arm |
| Paired article numbers | 11351 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint, with rubber mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Mounting, control/trailing arm (10073)
£46.59
Important compatibility info
| Placement on Vehicle | Rear |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Weight | 1.190 kg |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£46.59
Important compatibility info
| Function | Mounting, engine |
| Type | Mounting, engine |
| for OE number | 51811543 |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Placement on Vehicle | Rear |
| Weight | 0.674 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£46.60
Important compatibility info
| Weight | 0.117 kg |
| Number of Connectors / Ports | 2 |
| Function | Control Valve, camshaft adjustment |
| Extra Description | febi Plus |
| for OE number | 15330-37010 |
| Type | Control Valve, camshaft adjustment |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£46.60
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 128.9 mm |
| Width | 64.8 mm |
| Wear Warning Contact | excl. wear warning contact |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 18 mm |
| Function | Brake Pad Set, disc brake |
| Type | Brake Pad Set, disc brake |
| Weight | 1.1 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£46.60
Important compatibility info
| Weight | 0.518 kg |
| Width | 27 mm |
| Number of Teeth | 123 |
| Function | Timing Belt Kit |
| Type | Timing Belt Kit |
| Replaces | 105739 |
| Belts | with rounded tooth profile |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt (19853)
- 1x Febi Tensioner Pulley, timing belt (21269)
- 1x Febi Pulley Bolt (30153)
- 1x Febi Pulley Bolt (27259)
- 1x Febi Screw (179111)
£46.61
Important compatibility info
| Outer diameter | 76 mm |
| Operating Mode | Automatic |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Metal |
| Width of castor bearing surface | 28 mm |
| Type | Belt Tensioner, v-ribbed belt |
| Weight | 0.81 kg |
| Material | Metal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£46.62
Important compatibility info
| Placement on Vehicle | Wheel Side, Front Axle Left, Front Axle Right |
| Additional Information | with grease |
| Additional Information 2 | with nut |
| Thread Size | M24x1,5 |
| External Teeth, Wheel Side | 29 |
| Internal Teeth, wheel side | 26 |
| Weight | 2.742 kg |
| Type | Joint Kit, drive shaft |
| Function | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£46.62
Important compatibility info
| Type | Shock Absorber |
| Placement on Vehicle | Rear Axle Right, Rear Axle Left |
| Shock Absorber System | Twin-Tube |
| Shock Absorber Type | Gas Pressure |
| Weight | 1.947 kg |
| Mounting bores distance | 478 mm |
| Bore Diameter | 14 mm |
| Min. Length | 317 mm |
| Pipe Diameter | 53 mm. 45 mm |
| Function | Shock Absorber |
| Max. Length | 478 mm |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£46.63
Important compatibility info
| Rotor Style | Internally Vented |
| Rim Hole Number | 5 -Hole |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 292 mm |
| Weight | 5.240 kg |
| Function | Brake Disc |
| Number of mounting bores | 1 |
| Surface | Coated |
| Centering Diameter | 65.5 mm |
| Minimum thickness | 18 mm |
| Brake Disc Thickness | 20 mm |
| Thickness | 41.5 mm |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£46.63
Important compatibility info
| Rotor Style | Solid |
| Rim Hole Number | 4 -Hole |
| Weight | 0.63 kg |
| Placement on Vehicle | Front Axle |
| Outer diameter | 240 mm |
| Brake Disc Thickness | 10 mm |
| Bolt Hole Circle Diameter | 108 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£46.63
Important compatibility info
| for OE number | 58411-D3000 |
| Weight | 5.34 kg |
| Rotor Style | Solid |
| Rim Hole Number | 5 -Hole |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 302 mm |
| Thickness | 54.5 mm |
| Brake Disc Thickness | 10 mm |
| Minimum thickness | 8.4 mm |
| Bolt Hole Circle Diameter | 114.3 mm |
| Centering Diameter | 76 mm |
| Surface | Coated |
| Number of mounting bores | 3 |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£46.64
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right, Upper |
| Type | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
| Material | Sheet Steel |
| Additional Information | with rubber-metal mounts |
| Weight | 1.036 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£46.64
Important compatibility info
| Extra Description | febi Plus |
| Weight | 0.133 kg |
| Function | Valve, brake booster |
| Type | Valve, brake booster |
| Additional Information | with hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£46.65
Important compatibility info
| Weight | 1.200 kg |
| Placement on Vehicle | Rear |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£46.65
Important compatibility info
| Function | Joint Kit, drive shaft |
| Type | Joint Kit, drive shaft |
| Weight | 2.314 kg |
| Internal Teeth, wheel side | 26 |
| Placement on Vehicle | Front Axle Left, Front Axle Right, Wheel Side |
| External Teeth, Wheel Side | 30 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£46.66
Important compatibility info
| Rim Hole Number | 5 -Hole |
| Weight | 7.100 kg |
| Rotor Style | Internally Vented |
| Placement on Vehicle | Front Axle |
| Outer diameter | 278 mm |
| Thickness | 48.5 mm |
| Brake Disc Thickness | 25 mm |
| Minimum thickness | 23 mm |
| Bolt Hole Circle Diameter | 108 mm |
| Centering Diameter | 63.6 mm |
| Surface | Coated |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£46.66
Important compatibility info
| Additional Information 2 | with ball bearing |
| Placement on Vehicle | Front Axle |
| Material | Rubber/Metal |
| Inner diameter | 12 mm |
| Type | Repair Kit, suspension strut support mount |
| Function | Repair Kit, suspension strut support mount |
| Weight | 1.139 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£46.68
Important compatibility info
| Internal Thread Size | M22 x 1,5 |
| Weight | 4.90 kg |
| Placement on Vehicle | Lower |
| Length | 368 mm |
| Material | Steel |
| Outer diameter | 206 mm |
| Capacity | 10 l |
| Operating Pressure | 15.5 bar |
| Function | Air Tank, compressed-air system |
| Type | Air Tank, compressed-air system |
| Number of Connectors / Ports | 4 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£46.70
Important compatibility info
| Colour | Red |
| Housing Colour | Black |
| Weight | 0.07 kg |
| Number of Connectors / Ports | 9 |
| Function | Hazard Warning Light Switch |
| Control Type | Button Actuation |
| Extra Description | febi Plus |
| Type | Hazard Warning Light Switch |
| Additional Information | with relay |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£46.70
Important compatibility info
| Rotor Style | Solid |
| Weight | 5.880 kg |
| Rim Hole Number | 5 -Hole |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 290 mm |
| Thickness | 56 mm |
| Brake Disc Thickness | 12.6 mm |
| Minimum thickness | 11.25 mm |
| Bolt Hole Circle Diameter | 114.3 mm |
| Centering Diameter | 72 mm |
| Surface | Coated |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£46.70
Important compatibility info
| Gasket inner diameter | 115 mm |
| Gasket outer diameter | 123 mm |
| Function | Fuel filter |
| Type | Fuel filter |
| Weight | 0.570 kg |
| Filter type | Filter Insert |
| Inner diameter | 44 mm |
| Outer diameter | 100 mm |
| Height | 285 mm |
| Extra Description | febi Plus |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£46.71
Important compatibility info
| Placement on Vehicle | Front Axle Left, Lower |
| Material | Sheet Steel |
| Additional Information 2 | with rubber mount, with ball joint |
| Steering arm type | Triangular Control Arm (CV) |
| Paired article numbers | 177837 |
| Weight | 3.500 kg |
| Cone Size | 19 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£46.71
Important compatibility info
| Placement on Vehicle | Exhaust Turbocharger |
| Number of Connectors / Ports | 2 |
| Weight | 0.064 kg |
| Cable Length | 629 mm |
| Type | Sensor, exhaust gas temperature |
| Function | Sensor, exhaust gas temperature |
| External Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£46.72
Important compatibility info
| Bearing/Mounting Type | Rubber-Metal Mount |
| Weight | 1.075 kg |
| Replaces | 23988 |
| Function | Mounting, automatic transmission |
| Type | Mounting, automatic transmission |
| Placement on Vehicle | Rear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£46.72
Important compatibility info
| External Thread Size | M14 x 1,5 |
| Placement on Vehicle | before catalytic converter |
| Number of Connectors / Ports | 2 |
| Weight | 0.050 kg |
| Cable Length | 307 mm |
| Type | Sensor, exhaust gas temperature |
| Function | Sensor, exhaust gas temperature |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£46.72
Important compatibility info
| Weight | 0.072 kg |
| Cable Length | 272 mm |
| Type | Sensor, exhaust gas temperature |
| Function | Sensor, exhaust gas temperature |
| External Thread Size | M14 x 1,5 |
| Number of Connectors / Ports | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£46.72
Important compatibility info
| Function | Mounting, engine |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Placement on Vehicle | Left |
| Weight | 1.518 kg |
| External Thread Size | M8 x 1,25 |
| Type | Mounting, engine |
| for OE number | 1813.L2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£46.72
Important compatibility info
| Type | Sensor, exhaust gas temperature |
| Function | Sensor, exhaust gas temperature |
| External Thread Size | M14 x 1,5 |
| Number of Connectors / Ports | 2 |
| Weight | 0.053 kg |
| Cable Length | 236 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£46.72
Important compatibility info
| Spanner Size | 22 |
| Weight | 0.116 kg |
| Cable Length | 910 mm |
| Number of circuits | 3 |
| Lambda Sensor | Heated |
| Type | Oxygen Sensor |
| Function | Oxygen Sensor |
| External Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£46.72
Important compatibility info
| Weight | 0.889 kg |
| Outer diameter | 70 mm |
| Operating Mode | Automatic |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Plastic |
| Type | Belt Tensioner, v-ribbed belt |
| for OE number | 11 28 7 558 752 |
| Width of castor bearing surface | 28 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£46.72
Important compatibility info
| Function | Brake Pad Set, disc brake |
| Placement on Vehicle | Front Axle |
| Length | 170 mm |
| Width | 92.2 mm. 83 mm |
| Thickness/Strength 1 | 18.6 mm |
| Weight | 3.690 kg |
| Wear Warning Contact | prepared for wear warning indicator |
| Inspection Tag | ECE R90 Approved |
| Type | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£46.72
Important compatibility info
| Placement on Vehicle | Right |
| Length | 427 mm |
| Width | 244 mm |
| Thickness | 123 mm |
| Weight | 0.724 kg |
| Type | Cover, exterior mirror |
| Function | Cover, exterior mirror |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£46.73
Important compatibility info
| Material | Sheet Steel |
| Placement on Vehicle | Front Axle Left, Lower |
| Weight | 3.295 kg |
| Steering arm type | Control Arm |
| Paired article numbers | 09531 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | without ball joint |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Mounting, control/trailing arm (07847)
- 1x Febi Mounting, control/trailing arm (07856)
£46.73
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023