Proud to be a UK-based company
Contact us
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Width | 116 mm. 87 mm |
| Outer diameter | 120 mm |
| Inner diameter | 26 mm. 56.4 mm |
| Number of Holes | 4 |
| Bolt Hole Circle Diameter | 100 mm |
| Bearing Type | Angular Ball Bearing |
| Function | Wheel Bearing Kit |
| Type | Wheel Bearing Kit |
| Weight | 2.5 kg |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated ABS sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£48.04
Important compatibility info
| Spanner Size | 22 |
| Weight | 0.090 kg |
| Cable Length | 479 mm |
| Number of circuits | 4 |
| Lambda Sensor | Heated |
| Type | Oxygen Sensor |
| Function | Oxygen Sensor |
| External Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£48.05
Important compatibility info
| Length | 324 mm |
| Outer diameter | 86 mm |
| Bolt Head/Nut Design | Male Hex |
| Tightening Torque | 25 Nm |
| Function | Cap, oil filter housing |
| Extra Description | febi Plus |
| Type | Cap, oil filter housing |
| Weight | 0.181 kg |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£48.05
Important compatibility info
| Rod/Strut | Push Rod |
| Thread Size | M20 x 1,5, M24 x 1,5 |
| Pipe Diameter | 38 mm |
| Additional Information 2 | with crown nut |
| Placement on Vehicle | Front Axle |
| Adjustable | Adjustable on one side |
| Cone Size | 26 mm. 30 mm |
| Weight | 4.650 kg |
| Extra Description | ProKit |
| Function | Centre Rod Assembly |
| Type | Centre Rod Assembly |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£48.06
Important compatibility info
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
| Placement on Vehicle | Right |
| Weight | 1.291 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£48.06
Important compatibility info
| Placement on Vehicle | Front Axle Right, Wheel Side |
| Thread Size | M20x1,5 |
| External Teeth, Wheel Side | 21 |
| Internal Teeth, wheel side | 30 |
| Weight | 1.976 kg |
| Type | Joint Kit, drive shaft |
| Function | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£48.06
Important compatibility info
| Type | Wheel Bearing Kit |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with ABS sensor ring |
| Function | Wheel Bearing Kit |
| Inner diameter | 30 mm |
| Bearing Type | Angular Ball Bearing |
| Outer diameter | 80 mm |
| Width | 64 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Weight | 2.680 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£48.06
Important compatibility info
| Length | 120 mm |
| Height | 26 mm |
| Width | 87 mm |
| Additional Information | with gasket/seal |
| Bore Diameter | 6 mm |
| Weight | 0.14 kg |
| Mounting bores distance | 96 mm. 71 mm |
| Type | Repair Kit, shift cylinder |
| Function | Repair Kit, shift cylinder |
| Internal Thread Size | M6 x 1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£48.06
Important compatibility info
| Hole Spacing | 180 mm |
| Type | Suspension, propshaft |
| Function | Suspension, propshaft |
| Length | 230 mm |
| Additional Information 2 | with rolling bearing |
| Inner diameter | 65 mm |
| Bearing Type | Rolling Bearing |
| Weight | 1.822 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£48.06
Important compatibility info
| Weight | 2.500 kg |
| Placement on Vehicle | Front Axle Right, Lower |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 12958 |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information | with rubber mounts, with crown nut and split pin |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£48.07
Important compatibility info
| Weight | 2.500 kg |
| Placement on Vehicle | Front Axle Left, Lower |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 12957 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Additional Information | with rubber mounts, with crown nut and split pin |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£48.07
Important compatibility info
| Placement on Vehicle | Rear, both sides |
| Cable Length | 200 mm |
| Number of circuits | 12 |
| Type | Cable Repair Set, door |
| Function | Cable Repair Set, door |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£48.07
Important compatibility info
| Weight | 1.07 kg |
| Function | Parts Set, maintenance service |
| Type | Parts Set, maintenance service |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Oil Filter (32122)
- 1x Febi Air Filter (30368)
- 4x Febi Spark Plug (13536)
- 1x Febi Fuel filter (17635)
- 1x Febi Screw Plug, oil sump (04572)
- 1x Febi Filter, cabin air (32367)
- 1x Febi Filter, cabin air (11236)
£48.08
Important compatibility info
| Weight | 1.275 kg |
| Extra Description | febi Plus |
| Additional Information | without electric motor |
| Function | Wiper Linkage |
| Driver Position | for right-hand drive vehicles |
| Type | Wiper Linkage |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£48.08
Important compatibility info
| Weight | 0.374 kg |
| Number of Connectors / Ports | 2 |
| Additional Information 2 | with seal ring |
| Number of mounting bores | 4 |
| Function | Pump, fuel pre-supply |
| Type | Pump, fuel pre-supply |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£48.08
Important compatibility info
| Rotor Style | Solid |
| Weight | 4.530 kg |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 258 mm |
| Thickness | 58 mm |
| Brake Disc Thickness | 10 mm |
| Minimum thickness | 8 mm |
| Bolt Hole Circle Diameter | 114.3 mm |
| Centering Diameter | 60 mm |
| Surface | Coated |
| Number of mounting bores | 2 |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
| Rim Hole Number | 4 -Hole |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£48.09
Important compatibility info
| Weight | 0.278 kg |
| Width | 26 mm |
| Outer diameter | 60 mm |
| Function | Tensioner Pulley, timing belt |
| Type | Tensioner Pulley, timing belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£48.10
Important compatibility info
| Placement on Vehicle | Lower Front Axle, Left |
| Steering arm type | Control Arm |
| Material | Cast Steel |
| Paired article numbers | 18501 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Weight | 2.805 kg |
| Additional Information 2 | without ball joint |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£48.11
Important compatibility info
| Weight | 2.767 kg |
| Placement on Vehicle | Front Axle Right, Lower |
| Material | Cast Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 18503 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | without ball joint |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£48.11
Important compatibility info
| Material | Aluminium |
| Function | Brake Master Cylinder |
| Weight | 1.352 kg |
| Type | Brake Master Cylinder |
| Piston Diameter | 22.2 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£48.12
Important compatibility info
| Weight | 0.07 kg |
| Function | Sensor, exhaust gas temperature |
| Type | Sensor, exhaust gas temperature |
| Number of Connectors / Ports | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£48.12
Important compatibility info
| Paired article numbers | 100107 |
| Length | 395 mm |
| External Thread Size | M14 x 1,5, M12 x 1,5 |
| Placement on Vehicle | Front Axle Left |
| Function | Tie Rod |
| Extra Description | ProKit |
| Weight | 1.29 kg |
| Type | Tie Rod |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£48.12
Important compatibility info
| Weight | 1.267 kg |
| Function | Mounting, engine |
| Placement on Vehicle | Right |
| for OE number | 50820-SEA-E01 |
| Bearing/Mounting Type | Hydro Mount |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£48.12
Important compatibility info
| Placement on Vehicle | Front Axle |
| Inspection Tag | ECE R90 Approved |
| Wear Warning Contact | prepared for wear warning indicator |
| Weight | 5.940 kg |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
| Thickness/Strength 1 | 18.9 mm |
| Length | 207.5 mm |
| Width | 100.3 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£48.12
Important compatibility info
| Placement on Vehicle | Left |
| Voltage | 24 V |
| Paired article numbers | 100862 |
| Function | Electric Motor, window regulator |
| Weight | 0.652 kg |
| Number of Teeth | 9 |
| Type | Electric Motor, window regulator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£48.13
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Width | 41 mm |
| Outer diameter | 140 mm |
| Bearing Type | Tapered Roller Bearing |
| Weight | 2.548 kg |
| Function | Wheel Bearing |
| Inner diameter | 85 mm |
| Type | Wheel Bearing |
| Bearing Code | 33117 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£48.13
Important compatibility info
| Function | Drive Shaft |
| Type | Drive Shaft |
| Transmission-side joint diameter | 67.5 mm |
| Wheel Sided Joint Diameter | 69.9 mm |
| Min. Length | 918 mm |
| Placement on Vehicle | Front Axle Right |
| External Teeth, Diff.Side | 22 |
| Weight | 5.090 kg |
| External Teeth, Wheel Side | 22 |
| Paired article numbers | 181090 |
| Thread Size | M22x1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£48.13
Important compatibility info
| Number of Connectors / Ports | 2 |
| Function | Sensor, wheel speed |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Weight | 0.045 kg |
| Cable Length | 698 mm |
| Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£48.13
Important compatibility info
| Placement on Vehicle | Front Axle Left, Lower |
| Material | Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 48181 |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Weight | 2.538 kg |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£48.13
Important compatibility info
| Weight | 2.538 kg |
| Placement on Vehicle | Front Axle Right, Lower |
| Material | Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 48180 |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£48.13
Important compatibility info
| Placement on Vehicle | after catalytic converter |
| Number of Connectors / Ports | 2 |
| Weight | 0.051 kg |
| Cable Length | 250 mm |
| Type | Sensor, exhaust gas temperature |
| Function | Sensor, exhaust gas temperature |
| External Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£48.15
Important compatibility info
| Additional Information 2 | with tensioner element |
| Weight | 0.687 kg |
| Type | V-Ribbed Belt Set |
| Function | V-Ribbed Belt Set |
| Belt Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Length | 1070 mm |
| Number of Ribs | 6 |
| Housing material | Metal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi V-Ribbed Belt (37533)
- 1x Febi Belt Tensioner, v-ribbed belt (178939)
£48.15
Important compatibility info
| Weight | 1.688 kg |
| Function | Mounting Kit, stabiliser bar |
| Placement on Vehicle | Front Axle |
| Type | Mounting Kit, stabiliser bar |
| for OE number | 620 320 06 28 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Fastening Bolt, stabiliser bar (01051)
- 4x Febi Mounting, stabiliser bar (04765)
- 4x Febi Mounting, stabiliser bar (01053)
- 2x Febi Mounting, stabiliser bar (06724)
- 2x Febi Washer (06875)
- 2x Febi Washer (05266)
- 2x Febi Nut (05054)
- 2x Febi Nut (01697)
- 2x Febi Circlip (04766)
£48.16
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Inner diameter 2 | 13 mm |
| Steering arm type | Control Arm |
| Material | Sheet Steel |
| Placement on Vehicle | Rear Axle Left, Lower, Rear Axle Right, Rear |
| Length | 588 mm |
| Inner diameter 1 | 12 mm |
| Weight | 2.2 kg |
| Additional Information | with rubber-metal mount |
Additional Information
Technical Information
After replacement, the optical driver assistance systems (cameras, radar, etc.) may need to be recalibrated. Please observe the manufacturer's instructions.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£48.17
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Design | Telescopic Shock Absorber |
| Weight | 1.310 kg |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Mounting bores distance | 514 mm |
| Max. Length | 514 mm |
| Min. Length | 319 mm |
| Pipe Diameter | 48 mm. 38.5 mm |
| Mounting points diameter | 14 mm. 12 mm |
| Piston conrod diameter | 12.5 mm |
| Type | Shock Absorber |
| Function | Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£48.18
Important compatibility info
| Spanner Size | 22 |
| Weight | 0.110 kg |
| Cable Length | 612 mm |
| Number of circuits | 2 |
| Lambda Sensor | Heated |
| Type | Oxygen Sensor |
| Function | Oxygen Sensor |
| External Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£48.18
Important compatibility info
| Weight | 2.0 kg |
| Placement on Vehicle | Right |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
| for OE number | 2Q0 199 262 BK |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£48.20
Important compatibility info
| Type | Switch, headlight |
| Control Type | Rotary Operation |
| Combi Switch Function | with light dimmer function, with rear fog light function |
| Number of Connectors / Ports | 10 |
| Weight | 0.12 kg |
| Function | Switch, headlight |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£48.20
Important compatibility info
| Function | Sensor, exhaust gas temperature |
| for OE number | 08 55 277 |
| Weight | 0.07 kg |
| Type | Sensor, exhaust gas temperature |
| Placement on Vehicle | before catalytic converter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£48.20
Important compatibility info
| Spanner Size | 22 |
| Weight | 0.103 kg |
| Cable Length | 570 mm |
| Number of circuits | 4 |
| Lambda Sensor | Heated, Regulating Sensor |
| Type | Oxygen Sensor |
| Function | Oxygen Sensor |
| External Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£48.20
Important compatibility info
| Weight | 7.05 kg |
| Rim Hole Number | 5 -Hole |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 300 mm |
| Thickness | 66.1 mm |
| Brake Disc Thickness | 20 mm |
| Minimum thickness | 18.4 mm |
| Bolt Hole Circle Diameter | 120 mm |
| Centering Diameter | 75 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Function | Brake Disc |
| Rotor Style | Internally Vented |
| Type | Brake Disc Rotor |
| for OE number | 34 21 6 855 007 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£48.21
Important compatibility info
| Weight | 0.081 kg |
| Function | Tensioner, timing chain |
| Width | 45 mm |
| Length | 55 mm |
| Operating Mode | Hydraulic |
| Type | Tensioner, timing chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£48.21
Important compatibility info
| Glow Plug Type | after-glow capable |
| Type | Glow Plug |
| Function | Glow Plug |
| External Thread Size | M10 x 1 |
| Fitting Depth | 24.5 mm |
| Voltage | 11 V |
| Spanner Size | 10 |
| Length | 151 mm |
| Weight | 0.04 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£48.21
Important compatibility info
| Weight | 0.62 kg |
| Outer diameter | 65 mm |
| Operating Mode | Automatic |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Plastic |
| Type | Belt Tensioner, v-ribbed belt |
| for OE number | 16 114 261 80 |
| Width of castor bearing surface | 25 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£48.22
Important compatibility info
| External Thread Size | M14 x 1,5 |
| Type | Sensor, exhaust gas temperature |
| Cable Length | 296 mm |
| Weight | 0.052 kg |
| Number of Connectors / Ports | 2 |
| Placement on Vehicle | Catalytic Converter |
| Function | Sensor, exhaust gas temperature |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£48.23
Important compatibility info
| Weight | 0.083 kg |
| Type | Sensor, exhaust pressure |
| Function | Sensor, exhaust pressure |
| Number of Connectors / Ports | 3 |
| Sensor Type | Differential Pressure Sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£48.23
Important compatibility info
| Spanner Size | 22 |
| Weight | 0.086 kg |
| Cable Length | 490 mm |
| Number of circuits | 3 |
| Lambda Sensor | Heated |
| Type | Oxygen Sensor |
| Function | Oxygen Sensor |
| External Thread Size | M18 x 1,5 |
| Placement on Vehicle | before catalytic converter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£48.24
Important compatibility info
| Number of Connectors / Ports | 2 |
| Weight | 0.04 kg |
| Type | Sensor, exhaust gas temperature |
| Function | Sensor, exhaust gas temperature |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£48.24
Important compatibility info
| Weight | 0.07 kg |
| External Thread Size | M14 x 1,5 |
| Spanner Size | 17 |
| Number of Connectors / Ports | 2 |
| Cable Length | 270 mm |
| Type | Sensor, exhaust gas temperature |
| Function | Sensor, exhaust gas temperature |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£48.24
Important compatibility info
| Number of Connectors / Ports | 2 |
| for OE number | 15330-37020 |
| Type | Control Valve, camshaft adjustment |
| Extra Description | febi Plus |
| Function | Control Valve, camshaft adjustment |
| Weight | 0.109 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£48.24
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023