Proud to be a UK-based company
Contact us
Important compatibility info
| Voltage | 12 V |
| Operating Mode | Electric-pneumatic |
| Weight | 0.20 kg |
| Type | Pressure Converter |
| Function | Pressure Converter |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£48.35
Important compatibility info
| Outer diameter | 160 mm |
| Inner diameter | 32 mm |
| Number of Ribs | 5 |
| Parameter | 6PK |
| Function | Belt Pulley, crankshaft |
| Weight | 3.043 kg |
| Type | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£48.35
Important compatibility info
| Weight | 0.237 kg |
| Additional Information 2 | with retaining strap, with sensor |
| Outer diameter | 28 mm |
| Number of Connectors / Ports | 2 |
| Outer diameter 1 | 28 mm |
| Outer diameter 2 | 28 mm |
| Cooling Hose | from engine to heat exchanger |
| Type | Coolant Pipe |
| Function | Coolant Pipe |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£48.35
Important compatibility info
| Additional Information | with rubber mounts |
| Additional Information 2 | with ball joint |
| Weight | 3.384 kg |
| Placement on Vehicle | Front Axle Left |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 172560 |
| Cone Size | 20 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£48.35
Important compatibility info
| Weight | 1.645 kg |
| Placement on Vehicle | Rear Axle |
| Function | Gasket Set, wheel hub |
| Type | Gasket Set, wheel hub |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Circlip (24757)
- 1x Febi Thrust Washer, external planetary gearbox (21951)
- 1x Febi Ring, wheel hub (22842)
- 1x Febi Sensor Ring, ABS (18612)
- 1x Febi Shaft Seal, wheel hub (24758)
£48.35
Important compatibility info
| Width | 30 mm |
| Number of Teeth | 281 |
| Belts | with rounded tooth profile |
| Function | Timing Belt |
| Weight | 0.315 kg |
| Type | Timing Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£48.35
Important compatibility info
| Additional Information 2 | with ball joint |
| Steering arm type | Control Arm |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Paired article numbers | 29425 |
| Material | Cast Steel |
| Weight | 4.25 kg |
| Placement on Vehicle | Front Axle Left, Lower |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£48.35
Important compatibility info
| Min. Length | 329 mm |
| Weight | 3.710 kg |
| Shock Absorber System | Twin-Tube |
| Shock Absorber Mounting Type | Top pin, Bottom Clamp |
| Bore Diameter | 12 mm |
| Shock Absorber Type | Gas Pressure |
| Placement on Vehicle | Front Axle Left |
| Pipe Diameter | 51 mm |
| Piston conrod diameter | 22 mm |
| Max. Length | 509 mm |
| External Thread Size | M12 x 1,25 |
| Type | Shock Absorber |
| Mounting bores distance | 60 mm |
| Function | Shock Absorber |
| Shock Absorber Design | Suspension Strut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£48.35
Important compatibility info
| Pipe Diameter | 51 mm |
| Shock Absorber System | Twin-Tube |
| Min. Length | 329 mm |
| Max. Length | 509 mm |
| Mounting bores distance | 60 mm |
| Weight | 3.690 kg |
| Shock Absorber Design | Suspension Strut |
| Shock Absorber Mounting Type | Top pin, Bottom Clamp |
| External Thread Size | M12 x 1,25 |
| Shock Absorber Type | Gas Pressure |
| Placement on Vehicle | Front Axle Right |
| Bore Diameter | 12 mm |
| Piston conrod diameter | 22 mm |
| Function | Shock Absorber |
| Type | Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£48.35
Important compatibility info
| Weight | 3.50 kg |
| Placement on Vehicle | Front Axle Left, Lower |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 27074 |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information | with rubber mounts |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£48.35
Important compatibility info
| Extra Description | febi Plus |
| Function | Control Valve, camshaft adjustment |
| Type | Control Valve, camshaft adjustment |
| Weight | 0.247 kg |
| Number of Connectors / Ports | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£48.35
Important compatibility info
| Parameter | 6PK |
| Type | Belt Pulley, crankshaft |
| Function | Belt Pulley, crankshaft |
| Weight | 1.626 kg |
| Width | 43 mm |
| Inner diameter | 36 mm |
| Outer diameter | 142 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£48.35
Important compatibility info
| Weight | 0.415 kg |
| Width | 34 mm |
| Outer diameter | 60 mm |
| Function | Tensioner Pulley, timing belt |
| Type | Tensioner Pulley, timing belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£48.35
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 280 mm |
| Width | 127 mm |
| Material | PU (Polyurethane), Rubber |
| Type | Dust Cover Kit, shock absorber |
| Function | Dust Cover Kit, shock absorber |
| Weight | 0.582 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Protective Cap/Bellow, shock absorber (173357)
- 1x Febi Protective Cap/Bellow, shock absorber (176790)
- 2x Febi Rubber Buffer, suspension (170473)
£48.35
Important compatibility info
| Weight | 2.060 kg |
| Filter type | Filter Insert |
| Inner diameter | 120 mm |
| Outer diameter | 187 mm. 206 mm |
| Height | 591 mm |
| Type | Air Filter |
| Function | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£48.35
Important compatibility info
| Housing length | 395.5 mm |
| Length | 626 mm |
| Function | Gas Spring, boot/cargo area |
| Type | Gas Spring, boot/cargo area |
| Piston conrod diameter | 10 mm |
| Mounting points diameter | 17.8 mm |
| Stroke | 184 mm |
| Eject Force | 510 N |
| Weight | 0.5 kg |
| Placement on Vehicle | both sides |
| Housing Diameter | 22 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£48.35
Important compatibility info
| Additional Information | with rubber mounts |
| Weight | 3.384 kg |
| Placement on Vehicle | Front Axle Right |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 172561 |
| Cone Size | 20 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£48.35
Important compatibility info
| Weight | 0.270 kg |
| Material | Aluminium |
| Opening Temperature | 92 °C. 107 °C |
| Function | Thermostat, coolant |
| Type | Thermostat, coolant |
| Additional Information | with gasket/seal |
| Housing Type | with housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£48.35
Important compatibility info
| Placement on Vehicle | Left Rear, Right Rear |
| Operating Mode | Mechanical |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 409 mm |
| Min. Length | 358 mm |
| Pipe Diameter | 41 mm |
| Mounting points diameter | 14 mm |
| Function | Shock Absorber, driver cab suspension |
| Weight | 2.51 kg |
| Type | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£48.35
Important compatibility info
| Placement on Vehicle | both sides |
| Length | 343 mm |
| Weight | 0.2 kg |
| Housing Diameter | 18 mm |
| Eject Force | 330 N |
| Stroke | 117 mm |
| Mounting points diameter | 17.8 mm |
| Piston conrod diameter | 8 mm |
| Type | Gas Spring, bonnet |
| Function | Gas Spring, bonnet |
| Housing length | 139.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£48.35
Important compatibility info
| Material | PP (Polypropylene) |
| Type | Expansion Tank, coolant |
| Function | Expansion Tank, coolant |
| Weight | 0.602 kg |
| Additional Information 2 | without lid |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£48.35
Important compatibility info
| Function | Sensor, exhaust gas temperature |
| Number of Connectors / Ports | 2 |
| Weight | 0.071 kg |
| Type | Sensor, exhaust gas temperature |
| for OE number | 58 55 377 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£48.35
Important compatibility info
| Weight | 0.506 kg |
| External Thread Size | M10 x 1,5, M12 x 1,5 |
| Inner diameter | 8 mm |
| Housing Diameter | 55 mm |
| Function | Slave Cylinder, engine brake |
| Pressure side external thread size | M12 x 1,5 |
| Housing length | 150 mm |
| Type | Slave Cylinder, engine brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£48.35
Important compatibility info
| Weight | 1.55 kg |
| Placement on Vehicle | Front Axle Left, Lower, Front, Front Axle Right |
| Inner diameter | 12 mm |
| Steering arm type | Control Arm |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information | with fastening/mounting material |
| Material | Cast Steel |
| External Thread Size | M14 x 1,5 |
| Extra Description | ProKit |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with rubber mount, with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (45989)
- 1x Febi Bolt, control arm (40852)
- 1x Febi Nut (34653)
£48.35
Important compatibility info
| External Thread Size | M16 x 1,5 |
| Weight | 0.113 kg |
| Length | 60 mm |
| Spanner Size | 22 |
| Opening Pressure | 4.8 bar |
| Function | Overflow Valve |
| Internal Thread Size | M10 x 1 |
| Type | Overflow Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£48.35
Important compatibility info
| Type | Joint Kit, drive shaft |
| Int. teeth, diff.side, conn.to transm. | 33 |
| External Teeth, Diff.Side | 29 |
| Weight | 2.215 kg |
| Placement on Vehicle | transmission sided, Rear Axle Right, Rear Axle Left |
| Function | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£48.35
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Length | 355 mm |
| Weight | 4.3 kg |
| Rod/Strut | Coupling Rod |
| Thickness | 119 mm |
| Cone Size | 30 mm |
| Pipe Diameter | 40 mm |
| Function | Link/Coupling Rod, stabiliser bar |
| Width | 40 mm |
| External Thread Size | M24 x 1,5 |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£48.35
Important compatibility info
| Operating Mode | Electric |
| Number of Connectors / Ports | 5 |
| Function | EGR Valve |
| Weight | 0.77 kg |
| Additional Information | with gasket/seal |
| Type | EGR Valve |
| for OE number | 08 51 038 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£48.35
Important compatibility info
| Weight | 1.5 kg |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Width | 117 mm |
| Outer diameter | 117 mm |
| Thickness | 64 mm |
| Inner diameter | 30 mm |
| Number of Holes | 4 |
| Bolt Hole Circle Diameter | 98 mm |
| Bearing Type | Angular Ball Bearing |
| Type | Wheel Bearing Kit |
| Function | Wheel Bearing Kit |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£48.35
Important compatibility info
| Function | Brake Disc |
| Centering Diameter | 73 mm |
| Placement on Vehicle | Front Axle |
| Outer diameter | 282 mm |
| Thickness | 38 mm |
| Brake Disc Thickness | 24 mm |
| Minimum thickness | 22 mm |
| Bolt Hole Circle Diameter | 114.3 mm |
| Surface | Coated |
| Type | Brake Disc Rotor |
| Weight | 6.280 kg |
| Rotor Style | Internally Vented |
| Rim Hole Number | 5 -Hole |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£48.36
Important compatibility info
| Spanner Size | 22 |
| Weight | 0.080 kg |
| Cable Length | 330 mm |
| Number of circuits | 4 |
| Lambda Sensor | Heated |
| Type | Oxygen Sensor |
| Function | Oxygen Sensor |
| External Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£48.36
Important compatibility info
| External Thread Size | M14 x 1,5 |
| Weight | 0.07 kg |
| Spanner Size | 17 |
| Number of Connectors / Ports | 2 |
| Cable Length | 295 mm |
| Function | Sensor, exhaust gas temperature |
| Placement on Vehicle | Catalytic Converter |
| Type | Sensor, exhaust gas temperature |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£48.36
Important compatibility info
| for OE number | 12 13 7 559 842 |
| Number of Connectors / Ports | 3 |
| Function | Ignition Coil |
| Weight | 0.240 kg |
| Type | Ignition Coil |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£48.36
Important compatibility info
| Placement on Vehicle | Upper, Right |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Weight | 0.690 kg |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£48.36
Important compatibility info
| Placement on Vehicle | Rear Axle Right |
| Length | 805 mm |
| Paired article numbers | 179781 |
| Weight | 0.450 kg |
| Type | Brake Hose |
| Function | Brake Hose |
| Additional Information | with holder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£48.36
Important compatibility info
| Rotor Style | Internally Vented |
| Rim Hole Number | 5 -Hole |
| Weight | 12.7 kg |
| Placement on Vehicle | Front Axle |
| Outer diameter | 328 mm |
| Thickness | 52 mm |
| Brake Disc Thickness | 30 mm |
| Minimum thickness | 28 mm |
| Bolt Hole Circle Diameter | 108 mm |
| Centering Diameter | 63.6 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Function | Brake Disc |
| Type | Brake Disc Rotor |
| Replaces | 39289 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£48.36
Important compatibility info
| Weight | 5.470 kg |
| Rotor Style | Solid |
| Rim Hole Number | 5 -Hole |
| Placement on Vehicle | Front Axle |
| Outer diameter | 273 mm |
| Thickness | 38.3 mm |
| Brake Disc Thickness | 16 mm |
| Minimum thickness | 15 mm |
| Bolt Hole Circle Diameter | 114.3 mm |
| Centering Diameter | 66.6 mm |
| Surface | Coated |
| Number of mounting bores | 2 |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£48.36
Important compatibility info
| Number of Connectors / Ports | 2 |
| Weight | 0.05 kg |
| Cable Length | 350 mm |
| Type | Sensor, exhaust gas temperature |
| Function | Sensor, exhaust gas temperature |
| External Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£48.37
Important compatibility info
| Weight | 0.78 kg |
| Function | Mounting, engine |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Placement on Vehicle | Left Front |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£48.38
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Outer diameter | 265 mm |
| Thickness | 38 mm |
| Brake Disc Thickness | 10 mm |
| Minimum thickness | 8.5 mm |
| Bolt Hole Circle Diameter | 114.3 mm |
| Centering Diameter | 62 mm |
| Surface | Coated |
| Weight | 3.6 kg |
| Rim Hole Number | 5 -Hole |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
| Rotor Style | solid |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£48.39
Important compatibility info
| Type | Tensioner, timing belt |
| Weight | 0.266 kg |
| Width of castor bearing surface | 27 mm |
| Outer diameter | 73 mm |
| Function | Tensioner, timing belt |
| Track rollers material | Plastic |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£48.39
Important compatibility info
| Placement on Vehicle | Right |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Weight | 1.64 kg |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£48.40
Important compatibility info
| Placement on Vehicle | after soot particulate filter |
| External Thread Size | M14 x 1,5 |
| Cable Length | 380 mm |
| Function | Sensor, exhaust gas temperature |
| Number of Connectors / Ports | 2 |
| Type | Sensor, exhaust gas temperature |
| Weight | 0.047 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£48.40
Important compatibility info
| Screw length below head | 73 mm |
| Weight | 1.779 kg |
| Function | Repair Kit, flywheel |
| Type | Repair Kit, flywheel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Pilot Bearing, clutch (01470)
- 10x Febi Flywheel Bolt (02403)
£48.42
Important compatibility info
| Spanner Size | 22 |
| Weight | 0.082 kg |
| for OE number | 1 108 795 |
| Cable Length | 400 mm |
| Number of circuits | 4 |
| Lambda Sensor | Heated |
| Type | Oxygen Sensor |
| Function | Oxygen Sensor |
| External Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£48.43
Important compatibility info
| Type | Sensor, compressed-air system |
| Function | Sensor, compressed-air system |
| Number of Connectors / Ports | 6 |
| Weight | 0.1 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£48.44
Important compatibility info
| Type | Brake Disc Rotor |
| Function | Brake Disc |
| Weight | 5.92 kg |
| Surface | Coated |
| Centering Diameter | 84 mm |
| Bolt Hole Circle Diameter | 110 mm |
| Brake Disc Thickness | 25 mm |
| Rotor Style | Internally Vented |
| Outer diameter | 255 mm |
| Placement on Vehicle | Front Axle |
| Rim Hole Number | 5 -Hole |
| Minimum thickness | 23 mm |
| Thickness | 46.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£48.45
Important compatibility info
| Function | Mounting, engine |
| Type | Mounting, engine |
| Bearing/Mounting Type | Hydro Mount |
| Weight | 2.500 kg |
| Placement on Vehicle | Rear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£48.45
Important compatibility info
| Weight | 1.56 kg |
| Placement on Vehicle | Outer, Rear Axle Right |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 170522 |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£48.45
Important compatibility info
| Weight | 1.56 kg |
| Placement on Vehicle | Rear Axle Left, Outer |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 170521 |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£48.45
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023