Important compatibility info
Placement on Vehicle | Front Axle Right, Wheel Side |
Thread Size | M20x1,5 |
External Teeth, Wheel Side | 21 |
Internal Teeth, wheel side | 30 |
Weight | 1.976 kg |
Type | Joint Kit, drive shaft |
Function | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Bearing/Mounting Type | Rubber-Metal Mount |
Type | Mounting, engine |
Function | Mounting, engine |
Placement on Vehicle | Right |
Weight | 1.291 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 120 mm |
Height | 26 mm |
Width | 87 mm |
Additional Information | with gasket/seal |
Bore Diameter | 6 mm |
Weight | 0.14 kg |
Mounting bores distance | 96 mm. 71 mm |
Type | Repair Kit, shift cylinder |
Function | Repair Kit, shift cylinder |
Internal Thread Size | M6 x 1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.500 kg |
Placement on Vehicle | Front Axle Right, Lower |
Material | Sheet Steel |
Steering arm type | Control Arm |
Paired article numbers | 12958 |
Function | Control/Trailing Arm, wheel suspension |
Additional Information | with rubber mounts, with crown nut and split pin |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.500 kg |
Placement on Vehicle | Front Axle Left, Lower |
Material | Sheet Steel |
Steering arm type | Control Arm |
Paired article numbers | 12957 |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with ball joint |
Additional Information | with rubber mounts, with crown nut and split pin |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.275 kg |
Extra Description | febi Plus |
Additional Information | without electric motor |
Function | Wiper Linkage |
Driver Position | for right-hand drive vehicles |
Type | Wiper Linkage |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.374 kg |
Number of Connectors / Ports | 2 |
Additional Information 2 | with seal ring |
Number of mounting bores | 4 |
Function | Pump, fuel pre-supply |
Type | Pump, fuel pre-supply |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Front Axle Right |
Material | Rubber/Metal |
Additional Information 2 | with ball bearing |
Function | Repair Kit, suspension strut support mount |
Type | Repair Kit, suspension strut support mount |
Weight | 0.988 kg |
Inner diameter | 14 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension Strut Support Mount (174325)
- 1x Febi Rolling Bearing, suspension strut support mount (176255)
Important compatibility info
Weight | 1.07 kg |
Function | Parts Set, maintenance service |
Type | Parts Set, maintenance service |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Oil Filter (32122)
- 1x Febi Air Filter (30368)
- 4x Febi Spark Plug (13536)
- 1x Febi Fuel filter (17635)
- 1x Febi Screw Plug, oil sump (04572)
- 1x Febi Filter, cabin air (32367)
- 1x Febi Filter, cabin air (11236)
Important compatibility info
Weight | 0.278 kg |
Width | 26 mm |
Outer diameter | 60 mm |
Function | Tensioner Pulley, timing belt |
Type | Tensioner Pulley, timing belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.23 kg |
Function | Brake Shoe Set, parking brake |
Inspection Tag | ECE R90 Approved |
Outer diameter | 180 mm |
Width | 25 mm |
Placement on Vehicle | Rear Axle |
Additional Information | with fastening/mounting material |
Type | Brake Shoe Set, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Lower Front Axle, Left |
Steering arm type | Control Arm |
Material | Cast Steel |
Paired article numbers | 18501 |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Weight | 2.805 kg |
Additional Information 2 | without ball joint |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.767 kg |
Placement on Vehicle | Front Axle Right, Lower |
Material | Cast Steel |
Steering arm type | Control Arm |
Paired article numbers | 18503 |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | without ball joint |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Aluminium |
Function | Brake Master Cylinder |
Weight | 1.352 kg |
Type | Brake Master Cylinder |
Piston Diameter | 22.2 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Paired article numbers | 100107 |
Length | 395 mm |
External Thread Size | M14 x 1,5, M12 x 1,5 |
Placement on Vehicle | Front Axle Left |
Function | Tie Rod |
Extra Description | ProKit |
Weight | 1.29 kg |
Type | Tie Rod |
Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle |
Inspection Tag | ECE R90 Approved |
Wear Warning Contact | prepared for wear warning indicator |
Weight | 5.940 kg |
Type | Brake Pad Set, disc brake |
Function | Brake Pad Set, disc brake |
Thickness/Strength 1 | 18.9 mm |
Length | 207.5 mm |
Width | 100.3 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.07 kg |
Function | Sensor, exhaust gas temperature |
Type | Sensor, exhaust gas temperature |
Number of Connectors / Ports | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.267 kg |
Function | Mounting, engine |
Placement on Vehicle | Right |
for OE number | 50820-SEA-E01 |
Bearing/Mounting Type | Hydro Mount |
Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Connectors / Ports | 2 |
Function | Sensor, wheel speed |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Weight | 0.045 kg |
Cable Length | 698 mm |
Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.538 kg |
Placement on Vehicle | Front Axle Right, Lower |
Material | Steel |
Steering arm type | Control Arm |
Paired article numbers | 48180 |
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with ball joint |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M12 x 1,25 |
Steering arm type | Control Arm |
Additional Information | with nuts, with rubber mounts |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Cone Size | 16.5 mm |
Weight | 1.988 kg |
Paired article numbers | 175383 |
Material | Sheet Steel |
Additional Information 2 | with bolts/screws |
Placement on Vehicle | Front Axle Left, Lower |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Left |
Voltage | 24 V |
Paired article numbers | 100862 |
Function | Electric Motor, window regulator |
Weight | 0.652 kg |
Number of Teeth | 9 |
Type | Electric Motor, window regulator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Lower |
Material | Steel |
Steering arm type | Control Arm |
Paired article numbers | 48181 |
Function | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with ball joint |
Weight | 2.538 kg |
Type | Control/Trailing Arm, wheel suspension |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle |
Length | 163.2 mm |
Width | 80.8 mm |
Additional Information 2 | with anti-squeak plate, with bolts/screws |
Wear Warning Contact | with acoustic wear warning |
Function | Brake Pad Set, disc brake |
Type | Brake Pad Set, disc brake |
Thickness/Strength 1 | 18.5 mm |
Weight | 2.880 kg |
Inspection Tag | ECE R90 Approved |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Mounting, radiator |
Type | Mounting, radiator |
Placement on Vehicle | Left |
Weight | 0.591 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | with tensioner element |
Weight | 0.687 kg |
Type | V-Ribbed Belt Set |
Function | V-Ribbed Belt Set |
Belt Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Length | 1070 mm |
Number of Ribs | 6 |
Housing material | Metal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi V-Ribbed Belt (37533)
- 1x Febi Belt Tensioner, v-ribbed belt (178939)
Important compatibility info
Placement on Vehicle | after catalytic converter |
Number of Connectors / Ports | 2 |
Weight | 0.051 kg |
Cable Length | 250 mm |
Type | Sensor, exhaust gas temperature |
Function | Sensor, exhaust gas temperature |
External Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Lower, Rear Axle Right, Rear Axle Left |
Additional Information | with rubber mounts |
Material | Sheet Steel |
Steering arm type | Control Arm |
Weight | 3.627 kg |
for OE number | 1 931 562 |
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.688 kg |
Function | Mounting Kit, stabiliser bar |
Placement on Vehicle | Front Axle |
Type | Mounting Kit, stabiliser bar |
for OE number | 620 320 06 28 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Fastening Bolt, stabiliser bar (01051)
- 4x Febi Mounting, stabiliser bar (04765)
- 4x Febi Mounting, stabiliser bar (01053)
- 2x Febi Mounting, stabiliser bar (06724)
- 2x Febi Washer (06875)
- 2x Febi Washer (05266)
- 2x Febi Nut (05054)
- 2x Febi Nut (01697)
- 2x Febi Circlip (04766)
Important compatibility info
Paired article numbers | 09152 |
Bearing/Mounting Type | Hydro Mount |
Function | Mounting, engine |
Weight | 1.22 kg |
Replaces | 01954 |
Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023