Proud to be a UK-based company
Contact us
Important compatibility info
| Width | 39.2 mm |
| Outer diameter | 50.9 mm |
| Inner diameter | 17 mm |
| Number of Ribs | 6 |
| Tightening Torque | 85 Nm |
| Function | Alternator Freewheel Clutch |
| Additional Information 2 | with lid |
| Weight | 0.397 kg |
| Type | Alternator Freewheel Clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.34
Important compatibility info
| Length | 143 mm |
| Outer diameter | 75 mm |
| Internal Teeth, wheel side | 28 |
| Type | Joint Kit, drive shaft |
| Function | Joint Kit, drive shaft |
| External Thread Size | M18 x 1,5 |
| Weight | 1.79 kg |
| Seal Diameter | 49 mm |
| External Teeth, Wheel Side | 25 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.34
Important compatibility info
| Material | Aluminium |
| Paired article numbers | 183624 |
| Steering arm type | Control Arm |
| Additional Information 2 | with ball joint, with bearing |
| Placement on Vehicle | Rear, Front Axle Right |
| Type | Control/Trailing Arm, wheel suspension |
| External Thread Size | M14 x 1,5 |
| Function | Control/Trailing Arm, wheel suspension |
| Weight | 1.382 kg |
| Additional Information | with lock nut |
| Cone Size | 16 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.34
Important compatibility info
| Additional Information | with fastening/mounting material |
| Housing material | Aluminium |
| Weight | 0.6 kg |
| Extra Description | ProKit |
| Height | 149 mm |
| Width | 125 mm |
| Rated Power | 22 W |
| Light Design | LED |
| Mounting Type | Fully assembled |
| Cable Length | 280 mm |
| Depth | 60 mm |
| Voltage from | 12 V |
| Light Distribution | Spot illumination |
| Voltage to | 36 V |
| Protection Type (IP Code) | IP6K9K |
| Fulfils ECE norm | R10 |
| Lumen | 2160 lm |
| Temperature range from | -30 °C |
| Temperature range to | 50 °C |
| Function | Worklight |
| Inspection Tag | EMC |
| Type | Worklight |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.34
Important compatibility info
| Weight | 2.5 kg |
| Placement on Vehicle | Front Axle Right |
| Length | 148 mm |
| Thickness | 121 mm |
| Paired article numbers | 39874 |
| Rod/Strut | Coupling Rod |
| Cone Size | 30 mm |
| Pipe Diameter | 32 mm |
| Function | Link/Coupling Rod, stabiliser bar |
| External Thread Size | M24 x 1,5 |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.34
Important compatibility info
| Housing Diameter | 18 mm |
| Stroke | 231 mm |
| Eject Force | 420 N |
| Type | Gas Spring, boot/cargo area |
| Weight | 0.2 kg |
| Placement on Vehicle | both sides |
| Length | 604 mm |
| Piston conrod diameter | 8 mm |
| Mounting points diameter | 18 mm |
| Function | Gas Spring, boot/cargo area |
| Housing length | 327 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.34
Important compatibility info
| Placement on Vehicle | before soot particulate filter |
| Cable Length | 601 mm |
| Number of Connectors / Ports | 2 |
| Spanner Size | 17 |
| Weight | 0.07 kg |
| External Thread Size | M14 x 1,5 |
| Function | Sensor, exhaust gas temperature |
| Type | Sensor, exhaust gas temperature |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.34
Important compatibility info
| Function | Adjuster, braking system |
| Type | Adjuster, braking system |
| Weight | 3.295 kg |
| Paired article numbers | 179783 |
| Operating Mode | Automatic |
| Placement on Vehicle | Right |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.34
Important compatibility info
| for OE number | 7PP 819 810 A |
| Weight | 0.182 kg |
| Type | Coolant Control Valve |
| Function | Coolant Control Valve |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.34
Important compatibility info
| Weight | 0.506 kg |
| External Thread Size | M10 x 1,5, M12 x 1,5 |
| Inner diameter | 8 mm |
| Housing Diameter | 55 mm |
| Function | Slave Cylinder, engine brake |
| Pressure side external thread size | M12 x 1,5 |
| Housing length | 150 mm |
| Type | Slave Cylinder, engine brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.34
Important compatibility info
| Inner diameter | 30 mm |
| Additional Information 2 | Wheel Bearing integrated into wheel hub |
| Outer diameter | 66 mm |
| Width | 66 mm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Weight | 1.980 kg |
| Type | Wheel Bearing Kit |
| Bearing Type | Angular Ball Bearing |
| Function | Wheel Bearing Kit |
| Additional Information | with axle nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.34
Important compatibility info
| External Thread Size | M12 x 1,5 |
| Additional Information | with rubber mounts, with lock nut |
| Placement on Vehicle | Front Axle Right, Lower |
| Weight | 3.920 kg |
| Paired article numbers | 06157 |
| Additional Information 2 | with ball joint |
| Steering arm type | Control Arm |
| Material | Sheet Steel |
| Function | Control/Trailing Arm, wheel suspension |
| Cone Size | 17.3 mm |
| Type | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Mounting, control/trailing arm (03142)
£49.34
Important compatibility info
| Pipe Diameter | 51 mm |
| Shock Absorber System | Twin-Tube |
| Min. Length | 329 mm |
| Max. Length | 509 mm |
| Mounting bores distance | 60 mm |
| Weight | 3.690 kg |
| Shock Absorber Design | Suspension Strut |
| Shock Absorber Mounting Type | Top pin, Bottom Clamp |
| External Thread Size | M12 x 1,25 |
| Shock Absorber Type | Gas Pressure |
| Placement on Vehicle | Front Axle Right |
| Bore Diameter | 12 mm |
| Piston conrod diameter | 22 mm |
| Function | Shock Absorber |
| Type | Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.34
Important compatibility info
| Seal Material | Rubber |
| Material | Cast Aluminium |
| Additional Information 2 | with seal ring |
| Number of Teeth | 31 |
| Weight | 0.9 kg |
| Number of Wings | 6 |
| Type | Water Pump, engine cooling |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Metal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.34
Important compatibility info
| Parameter | 6PK |
| Type | Belt Pulley, crankshaft |
| Function | Belt Pulley, crankshaft |
| Weight | 1.626 kg |
| Width | 43 mm |
| Inner diameter | 36 mm |
| Outer diameter | 142 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.34
Important compatibility info
| Weight | 0.961 kg |
| Material | Aluminium |
| Function | Oil Cooler, automatic transmission |
| Additional Information | with seal rings |
| Transmission Type | Automatic Transmission |
| Type | Oil Cooler, automatic transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Oil Cooler, automatic transmission (100124)
- 2x Febi Seal Ring, oil cooler (lubrication) (100122)
£49.34
Important compatibility info
| Control Type | Rotary Operation |
| Number of Connectors / Ports | 13 |
| Type | Switch, headlight |
| Function | Switch, headlight |
| Extra Description | febi Plus |
| Weight | 0.173 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.34
Important compatibility info
| Placement on Vehicle | both sides |
| Length | 556 mm |
| Weight | 0.2 kg |
| Housing Diameter | 18 mm |
| Eject Force | 575 N |
| Stroke | 179 mm |
| Mounting points diameter | 16.5 mm |
| Piston conrod diameter | 8 mm |
| Type | Gas Spring, boot/cargo area |
| Function | Gas Spring, boot/cargo area |
| Housing length | 306 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.34
Important compatibility info
| Function | Joint, propshaft |
| Outer diameter | 53 mm |
| Length | 150 mm |
| Replaces | 23837 |
| Weight | 3.320 kg |
| Type | Joint, propshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.34
Important compatibility info
| Filter type | Filter Insert |
| Function | Air Filter |
| Inner diameter | 130 mm |
| Height | 420 mm |
| Outer diameter | 240 mm |
| Weight | 3.426 kg |
| Type | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£49.34
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023