Important compatibility info
Weight | 2.308 kg |
Placement on Vehicle | Front Axle Right, Rear, Lower |
Material | Steel |
Steering arm type | Control Arm |
Paired article numbers | 44228 |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with rubber mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with rubber-metal mounts |
Material | Sheet Steel |
Placement on Vehicle | Upper, Rear Axle Right |
Paired article numbers | 184817 |
Weight | 1.141 kg |
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Steering arm type | Control Arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M14 x 1,5 |
Weight | 0.055 kg |
Number of Connectors / Ports | 2 |
Function | Sensor, exhaust gas temperature |
Type | Sensor, exhaust gas temperature |
Cable Length | 390 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M14 x 1,5 |
Placement on Vehicle | before soot particulate filter |
Spanner Size | 17 |
Number of Connectors / Ports | 2 |
Cable Length | 430 mm |
Type | Sensor, exhaust gas temperature |
Function | Sensor, exhaust gas temperature |
Weight | 0.045 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | after catalytic converter |
Spanner Size | 22 |
Weight | 0.125 kg |
Cable Length | 815 mm |
Number of circuits | 4 |
Lambda Sensor | Heated, Diagnostic Probe |
Type | Oxygen Sensor |
Function | Oxygen Sensor |
External Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Spanner Size | 22 |
Weight | 0.112 kg |
Cable Length | 650 mm |
Number of circuits | 4 |
Lambda Sensor | Heated, Regulating Sensor |
Type | Oxygen Sensor |
Function | Oxygen Sensor |
External Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.710 kg |
Outer diameter | 65 mm |
Operating Mode | Mechanical |
Housing material | Aluminium |
Function | Belt Tensioner, v-ribbed belt |
Track rollers material | Plastic |
Width of castor bearing surface | 25 mm |
Type | Belt Tensioner, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Centering Diameter | 59 mm |
Bolt Hole Circle Diameter | 98 mm |
Weight | 6.0 kg |
Surface | Coated |
Rim Hole Number | 5 -Hole |
Type | Brake Disc Rotor |
Rotor Style | Solid |
Function | Brake Disc |
Minimum thickness | 13.2 mm |
Placement on Vehicle | Front Axle |
Outer diameter | 281 mm |
Thickness | 45 mm |
Brake Disc Thickness | 15 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Spanner Size | 22 |
Weight | 0.119 kg |
Cable Length | 800 mm |
Number of circuits | 4 |
Lambda Sensor | Heated, Regulating Sensor |
Type | Oxygen Sensor |
Function | Oxygen Sensor |
External Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Wear Warning Contact | excl. wear warning contact |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 17.4 mm |
Function | Brake Pad Set, disc brake |
Placement on Vehicle | Front Axle |
Length | 123.1 mm |
Width | 56.1 mm |
Type | Brake Pad Set, disc brake |
Weight | 2.932 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Sensor, exhaust gas temperature |
Placement on Vehicle | behind exhaust turbocharger |
External Thread Size | M14 x 1,5 |
Type | Sensor, exhaust gas temperature |
Number of Connectors / Ports | 2 |
Weight | 0.037 kg |
Cable Length | 405 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
for OE number | 008 153 48 28 |
Number of Connectors / Ports | 3 |
Weight | 0.053 kg |
Type | Sensor, fuel pressure |
Function | Sensor, fuel pressure |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
for OE number | 12 13 7 559 842 |
Number of Connectors / Ports | 3 |
Function | Ignition Coil |
Weight | 0.240 kg |
Type | Ignition Coil |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.07 kg |
External Thread Size | M14 x 1,5 |
Function | Sensor, exhaust gas temperature |
Cable Length | 1171 mm |
Number of Connectors / Ports | 2 |
Spanner Size | 17 |
Type | Sensor, exhaust gas temperature |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | before catalytic converter |
Number of Connectors / Ports | 2 |
Weight | 0.067 kg |
Cable Length | 660 mm |
Type | Sensor, exhaust gas temperature |
Function | Sensor, exhaust gas temperature |
External Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.94 kg |
Placement on Vehicle | Upper Right |
Bearing/Mounting Type | Hydro Mount |
Function | Mounting, engine |
Type | Mounting, engine |
for OE number | 1839.J1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 61.5 mm |
Spanner Size | 22 |
Opening Pressure | 4.2 bar |
Function | Overflow Valve |
Internal Thread Size | M10 x 1,5 |
External Thread Size | M16 x 1,5 |
Weight | 0.119 kg |
Type | Overflow Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Bore Diameter | 16 mm |
Shock Absorber Type | Oil Pressure |
Shock Absorber Design | Telescopic Shock Absorber |
Weight | 1.550 kg |
Shock Absorber Mounting Type | Top eye, Bottom eye |
Mounting bores distance | 627 mm |
Max. Length | 627 mm |
Min. Length | 370 mm |
Pipe Diameter | 47 mm. 38.5 mm |
Piston conrod diameter | 12.5 mm |
Type | Shock Absorber |
Function | Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Cone Size | 18 mm |
Weight | 2.683 kg |
Steering arm type | Control Arm |
Paired article numbers | 175305 |
Additional Information 2 | with ball joint |
Material | Sheet Steel |
Placement on Vehicle | Front Axle Left, Upper |
External Thread Size | M14 x 1,5 |
Additional Information | with crown nut and split pin, with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.18 kg |
Extra Description | febi Plus |
Function | Pressure Converter, exhaust control |
for OE number | 1618.42 |
Type | Pressure Converter, exhaust control |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023