Proud to be a UK-based company
Contact us
Important compatibility info
| Additional Information | with Thrust Bearing |
| Weight | 1.06 kg |
| Length | 154 mm |
| Material | NBR (nitrile butadiene rubber) |
| Outer diameter | 27 mm |
| Function | Repair Kit, kingpin |
| Type | Repair Kit, kingpin |
| Additional Information 2 | with bearing |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Kingpin (06320)
- 3x Febi Bush, steering knuckle (02171)
- 1x Febi Bush, steering knuckle (02172)
- 1x Febi Seal Ring, steering knuckle (02167)
- 2x Febi Lock Ring, steering knuckle (02173)
- 1x Febi Kingpin (01432)
- 1x Febi Lock Ring, steering knuckle (02168)
- 1x Febi Lock Ring, steering knuckle (02169)
- 2x Febi Seal Ring, steering knuckle (02174)
- 1x Febi Nut (01030)
- 2x Febi Circlip (02166)
- 1x Febi Springwasher (07583)
- 1x Febi Grease Nipple (06533)
- 1x Febi Grease Nipple (01094)
- 1x Febi Grease Nipple (01095)
£50.28
Important compatibility info
| Inner diameter | 30 mm |
| Additional Information 2 | Wheel Bearing integrated into wheel hub |
| Outer diameter | 66 mm |
| Width | 66 mm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Weight | 1.980 kg |
| Type | Wheel Bearing Kit |
| Bearing Type | Angular Ball Bearing |
| Function | Wheel Bearing Kit |
| Additional Information | with axle nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£50.28
Important compatibility info
| Steering arm type | Control Arm |
| Paired article numbers | 180938 |
| Additional Information 2 | with ball joint |
| Material | Sheet Steel |
| Placement on Vehicle | Front Axle Left, Lower |
| Additional Information | with rubber mounts |
| Weight | 3.97 kg |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£50.28
Important compatibility info
| Material | Plastic |
| Weight | 0.160 kg |
| Type | Expansion Tank, coolant |
| Function | Expansion Tank, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£50.28
Important compatibility info
| Type | Expansion Tank, coolant |
| Function | Expansion Tank, coolant |
| Weight | 0.666 kg |
| Additional Information 2 | with lid |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Expansion Tank, coolant (172165)
- 1x Febi Cap, coolant tank (40722)
£50.28
Important compatibility info
| Function | Brake Shaft, drum brake |
| Screw length below head | 633 mm |
| Type | Brake Shaft, drum brake |
| Paired article numbers | 174150 |
| Number of Teeth | 10 |
| Outer diameter | 104 mm |
| Length | 678 mm |
| Placement on Vehicle | Right |
| Weight | 6.34 kg |
| Brake Shaft Cam | S-cam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£50.28
Important compatibility info
| for OE number | 7PP 819 810 A |
| Weight | 0.182 kg |
| Type | Coolant Control Valve |
| Function | Coolant Control Valve |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£50.28
Important compatibility info
| Length | 1220 mm |
| Outer diameter | 8.5 mm |
| Inner diameter | 3.2 mm |
| Pressure | 362 bar |
| Function | Hose Line, driver cab tilting device |
| Weight | 1.25 kg |
| External Thread Size | M12 x 1,5 |
| Type | Hose Line, driver cab tilting device |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£50.28
Important compatibility info
| Core Depth | 42 mm |
| Core Width | 370 mm |
| Core Length | 188 mm |
| Type | Heat Exchanger, interior heating |
| Function | Heat Exchanger, interior heating |
| Weight | 1.048 kg |
| Additional Information | with gasket/seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£50.28
Important compatibility info
| Outer diameter | 160 mm |
| Bolt Hole Circle Diameter | 147 mm |
| Spanner Size | 36 |
| Parameter | VL120L |
| Function | Clutch, radiator fan |
| Weight | 0.94 kg |
| Type | Clutch, radiator fan |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£50.28
Important compatibility info
| Material | Cast Aluminium |
| Additional Information | with gasket/seal |
| Type | Water Pump, engine cooling |
| Number of Wings | 6 |
| Seal Material | Paper |
| Water pump impeller material | Plastic |
| Function | Water Pump, engine cooling |
| Weight | 1.06 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£50.28
Important compatibility info
| Length | 143 mm |
| Outer diameter | 75 mm |
| Internal Teeth, wheel side | 28 |
| Type | Joint Kit, drive shaft |
| Function | Joint Kit, drive shaft |
| External Thread Size | M18 x 1,5 |
| Weight | 1.79 kg |
| Seal Diameter | 49 mm |
| External Teeth, Wheel Side | 25 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£50.28
Important compatibility info
| Weight | 1.9 kg |
| Internal Thread Size | M24 x 1,5 |
| Additional Information | with lock nut |
| Type | Angled Ball Joint / Tie Rod End |
| Function | Angled Ball Joint / Tie Rod End |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 80 mm |
| Cone Size | 30 mm |
| Extra Description | ProKit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£50.28
Important compatibility info
| Internal Thread Size | M24 x 1,5 |
| Extra Description | ProKit |
| External Thread Size | M20 x 1,5 |
| Function | Tie Rod End |
| Type | Tie Rod End |
| Weight | 2.440 kg |
| Thread Length | 70 mm |
| Length | 263 mm |
| Placement on Vehicle | Front Axle |
| Additional Information | with lock nut |
| Thread Type | with right-hand thread |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£50.28
Important compatibility info
| Function | Shock Absorber, driver cab suspension |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Type | Shock Absorber, driver cab suspension |
| Piston conrod diameter | 12 mm |
| Mounting points diameter | 20 mm |
| Pipe Diameter | 46 mm. 40 mm |
| Operating Mode | Mechanical |
| Placement on Vehicle | Rear |
| Max. Length | 235 mm |
| Min. Length | 219 mm |
| Weight | 1.2 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£50.28
Important compatibility info
| Material | Metal |
| Function | Deflection/Guide Pulley, v-ribbed belt |
| Outer diameter | 80 mm |
| Type | Deflection/Guide Pulley, v-ribbed belt |
| Additional Information 2 | with screw |
| Weight | 0.37 kg |
| Width of castor bearing surface | 31 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£50.28
Important compatibility info
| Weight | 1.870 kg |
| Width of castor bearing surface | 38 mm |
| Track rollers material | Metal |
| Outer diameter | 74 mm |
| Function | Belt Tensioner, v-ribbed belt |
| Housing material | Aluminium |
| Type | Belt Tensioner, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£50.28
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Number of Connectors / Ports | 2 |
| Cable Length | 647 mm |
| Function | Sensor, wheel speed |
| Type | Sensor, wheel speed |
| Weight | 0.041 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£50.28
Important compatibility info
| Length | 633 mm |
| Function | Brake Shaft, drum brake |
| Screw length below head | 588 mm |
| Number of Teeth | 10 |
| Outer diameter | 103 mm |
| Type | Brake Shaft, drum brake |
| Paired article numbers | 174141 |
| Placement on Vehicle | Left |
| Weight | 6.38 kg |
| Brake Shaft Cam | S-cam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£50.28
Important compatibility info
| Extra Description | febi Plus |
| Function | Oil sump |
| Type | Oil sump |
| Weight | 1.953 kg |
| Additional Information 2 | with seal ring |
| Spanner Size | 21 |
| Additional Information | with oil drain plug |
| Length | 462 mm |
| External Thread Size | M14 x 1,25 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£50.28
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023