Important compatibility info
Inner diameter | 30 mm |
Additional Information 2 | Wheel Bearing integrated into wheel hub |
Outer diameter | 66 mm |
Width | 66 mm |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Weight | 1.980 kg |
Type | Wheel Bearing Kit |
Bearing Type | Angular Ball Bearing |
Function | Wheel Bearing Kit |
Additional Information | with axle nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Wheel Side |
Type | Joint Kit, drive shaft |
Seal Diameter | 72.5 mm |
Length | 189 mm |
Weight | 4.040 kg |
External Thread Size | M28 x 1,5 |
Function | Joint Kit, drive shaft |
Outer diameter | 106 mm |
External Teeth, Wheel Side | 30 |
Internal Teeth, wheel side | 29 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 633 mm |
Function | Brake Shaft, drum brake |
Screw length below head | 588 mm |
Number of Teeth | 10 |
Outer diameter | 103 mm |
Type | Brake Shaft, drum brake |
Paired article numbers | 174141 |
Placement on Vehicle | Left |
Weight | 6.38 kg |
Brake Shaft Cam | S-cam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.95 kg |
Placement on Vehicle | Rear Axle Left, Rear Axle Right, Front |
Function | Bush Set, axle beam |
Material | Rubber/Metal |
Type | Bush Set, axle beam |
Additional Information 2 | with bolts/screws |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Bushing, axle beam (14897)
- 2x Febi Screw (02535)
- 2x Febi Bushing, axle cross member (06668)
Important compatibility info
Internal Thread Size | M24 x 1,5 |
Extra Description | ProKit |
External Thread Size | M20 x 1,5 |
Function | Tie Rod End |
Type | Tie Rod End |
Weight | 2.440 kg |
Thread Length | 70 mm |
Length | 263 mm |
Placement on Vehicle | Front Axle |
Additional Information | with lock nut |
Thread Type | with right-hand thread |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with Thrust Bearing |
Weight | 1.06 kg |
Length | 154 mm |
Material | NBR (nitrile butadiene rubber) |
Outer diameter | 27 mm |
Function | Repair Kit, kingpin |
Type | Repair Kit, kingpin |
Additional Information 2 | with bearing |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Kingpin (06320)
- 3x Febi Bush, steering knuckle (02171)
- 1x Febi Bush, steering knuckle (02172)
- 1x Febi Seal Ring, steering knuckle (02167)
- 2x Febi Lock Ring, steering knuckle (02173)
- 1x Febi Kingpin (01432)
- 1x Febi Lock Ring, steering knuckle (02168)
- 1x Febi Lock Ring, steering knuckle (02169)
- 2x Febi Seal Ring, steering knuckle (02174)
- 1x Febi Nut (01030)
- 2x Febi Circlip (02166)
- 1x Febi Springwasher (07583)
- 1x Febi Grease Nipple (06533)
- 1x Febi Grease Nipple (01094)
- 1x Febi Grease Nipple (01095)
Important compatibility info
Core Depth | 42 mm |
Core Width | 370 mm |
Core Length | 188 mm |
Type | Heat Exchanger, interior heating |
Function | Heat Exchanger, interior heating |
Weight | 1.048 kg |
Additional Information | with gasket/seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Sensor, oil pressure |
Weight | 0.106 kg |
Number of Connectors / Ports | 3 |
Type | Sensor, oil pressure |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Shock Absorber, driver cab suspension |
Type | Shock Absorber, driver cab suspension |
Mounting points diameter | 14 mm |
Pipe Diameter | 40 mm. 46 mm |
Min. Length | 193 mm |
Max. Length | 239 mm |
Shock Absorber Mounting Type | Top eye, Bottom eye |
Weight | 1.0 kg |
Operating Mode | Mechanical |
Placement on Vehicle | Rear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.655 kg |
External Thread Size | M16 x 1,5 |
Placement on Vehicle | Front Axle Right |
Length | 335 mm |
Width | 52 mm |
Thickness | 90 mm |
Rod/Strut | Coupling Rod |
Cone Size | 20 mm |
Pipe Diameter | 30 mm |
Type | Link/Coupling Rod, stabiliser bar |
Function | Link/Coupling Rod, stabiliser bar |
Extra Description | ProKit |
Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 1220 mm |
Outer diameter | 8.5 mm |
Inner diameter | 3.2 mm |
Pressure | 362 bar |
Function | Hose Line, driver cab tilting device |
Weight | 1.25 kg |
External Thread Size | M12 x 1,5 |
Type | Hose Line, driver cab tilting device |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | both sides |
Length | 664 mm |
Weight | 0.2 kg |
Housing Diameter | 22 mm |
Eject Force | 455 N |
Stroke | 249 mm |
Mounting points diameter | 18 mm |
Piston conrod diameter | 10 mm |
Type | Gas Spring, boot/cargo area |
Function | Gas Spring, boot/cargo area |
Housing length | 384 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 678 mm |
Weight | 6.34 kg |
Screw length below head | 633 mm |
Function | Brake Shaft, drum brake |
Type | Brake Shaft, drum brake |
Paired article numbers | 174151 |
Number of Teeth | 10 |
Outer diameter | 104 mm |
Placement on Vehicle | Left |
Brake Shaft Cam | S-cam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | with seal ring |
Material | Cast Aluminium |
Seal Material | Rubber |
Weight | 0.790 kg |
Number of Wings | 7 |
Type | Water Pump, engine cooling |
Function | Water Pump, engine cooling |
Water pump impeller material | Metal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M10 x 1,0 |
Additional Information | with fastening/mounting material |
Weight | 2.230 kg |
Placement on Vehicle | Front Axle |
Pipe Diameter | 22 mm |
Steering | with tie rod end |
Type | Tie Rod |
Function | Tie Rod |
Extra Description | ProKit |
Length | 980 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Metal |
Function | Deflection/Guide Pulley, v-ribbed belt |
Outer diameter | 80 mm |
Type | Deflection/Guide Pulley, v-ribbed belt |
Additional Information 2 | with screw |
Weight | 0.37 kg |
Width of castor bearing surface | 31 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.906 kg |
Function | Parts Set, maintenance service |
Type | Parts Set, maintenance service |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Oil Filter (36562)
- 1x Febi Oil Filter (37257)
- 1x Febi Air Filter (30992)
- 1x Febi Fuel filter (17635)
- 1x Febi Screw Plug, oil sump (04572)
- 1x Febi Filter, cabin air (17263)
- 4x Febi Spark Plug (13536)
Important compatibility info
Weight | 0.84 kg |
Placement on Vehicle | Front |
Material | Plastic, Rubber/Metal |
Bearing/Mounting Type | Rubber-Metal Mount |
Function | Mounting, engine |
Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 160 mm |
Bolt Hole Circle Diameter | 147 mm |
Spanner Size | 36 |
Parameter | VL120L |
Function | Clutch, radiator fan |
Weight | 0.94 kg |
Type | Clutch, radiator fan |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Brake Shaft, drum brake |
Screw length below head | 633 mm |
Type | Brake Shaft, drum brake |
Paired article numbers | 174150 |
Number of Teeth | 10 |
Outer diameter | 104 mm |
Length | 678 mm |
Placement on Vehicle | Right |
Weight | 6.34 kg |
Brake Shaft Cam | S-cam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Combi Switch Function | Window Regulator, Heated wing mirror on/off |
Function | Multi-Function Switch |
Number of Connectors / Ports | 18 |
Placement on Vehicle | Driver side |
Type | Multi-Function Switch |
Weight | 0.097 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Screw length below head | 402 mm |
Paired article numbers | 45518 |
Placement on Vehicle | Rear Axle Left |
Outer diameter | 110 mm |
Weight | 5.6 kg |
Function | Brake Shaft, drum brake |
Number of Teeth | 10 |
Type | Brake Shaft, drum brake |
Internal Thread Size | M12 x 1,5 |
Length | 456 mm |
Brake Shaft Cam | S-cam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Cast Aluminium |
Additional Information | with gasket/seal |
Type | Water Pump, engine cooling |
Number of Wings | 6 |
Seal Material | Paper |
Water pump impeller material | Plastic |
Function | Water Pump, engine cooling |
Weight | 1.06 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Right, Rear Axle Left |
Bore Diameter | 16 mm |
Shock Absorber Type | Oil Pressure |
Shock Absorber Design | Telescopic Shock Absorber |
Weight | 1.350 kg |
Shock Absorber Mounting Type | Top eye, Bottom eye |
Mounting bores distance | 378 mm |
Max. Length | 378 mm |
Min. Length | 276 mm |
Pipe Diameter | 51 mm. 41 mm |
Type | Shock Absorber |
Function | Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Left Rear |
Bearing/Mounting Type | Hydro Mount |
Function | Mounting, engine |
Weight | 1.736 kg |
Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.320 kg |
Material | Metal |
Outer diameter | 76 mm |
Function | Deflection/Guide Pulley, v-ribbed belt |
Width of castor bearing surface | 26 mm |
Type | Deflection/Guide Pulley, v-ribbed belt |
Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Sensor, exhaust gas temperature |
Placement on Vehicle | Front |
Number of Connectors / Ports | 2 |
Weight | 0.07 kg |
Type | Sensor, exhaust gas temperature |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.060 kg |
External Thread Size | M14 x 1,5 |
Placement on Vehicle | behind exhaust turbocharger |
Spanner Size | 17 |
Cable Length | 174 mm |
Number of Connectors / Ports | 2 |
Function | Sensor, exhaust gas temperature |
Type | Sensor, exhaust gas temperature |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 55 mm |
Inner diameter | 17 mm |
Number of Ribs | 6 |
Function | Alternator Freewheel Clutch |
Additional Information 2 | with lid |
Weight | 0.386 kg |
Type | Alternator Freewheel Clutch |
for OE number | 611 155 02 15 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Control/Trailing Arm, wheel suspension |
Weight | 3.76 kg |
Material | Sheet Steel |
Additional Information | with rubber mounts |
Steering arm type | Control Arm |
Type | Control/Trailing Arm, wheel suspension |
Paired article numbers | 188785 |
Placement on Vehicle | Front Axle Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Control/Trailing Arm, wheel suspension |
Material | Sheet Steel |
Placement on Vehicle | Front Axle Right |
Additional Information | with rubber mounts |
Steering arm type | Control Arm |
Paired article numbers | 188784 |
Type | Control/Trailing Arm, wheel suspension |
Weight | 3.76 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Rim Hole Number | 6 -Hole |
Weight | 6.650 kg |
Rotor Style | Internally Vented |
Placement on Vehicle | Rear Axle |
Outer diameter | 312 mm |
Thickness | 68.1 mm |
Brake Disc Thickness | 18 mm |
Minimum thickness | 16 mm |
Bolt Hole Circle Diameter | 139.7 mm |
Centering Diameter | 106.1 mm |
Surface | Coated |
Number of mounting bores | 6 |
Max.skimmed drum measure | 211 mm |
Type | Brake Disc Rotor |
Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Connectors / Ports | 2 |
Weight | 0.056 kg |
Cable Length | 508 mm |
Type | Sensor, exhaust gas temperature |
Function | Sensor, exhaust gas temperature |
External Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Bearing/Mounting Type | Rubber-Metal Mount |
Function | Mounting, engine |
Placement on Vehicle | Rear |
Weight | 0.584 kg |
Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Mounting, engine |
Bearing/Mounting Type | Hydro Mount |
Type | Mounting, engine |
Weight | 1.600 kg |
Placement on Vehicle | Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Right, Rear Axle Left |
Bore Diameter | 12 mm |
Shock Absorber Type | Oil Pressure |
Shock Absorber Design | Telescopic Shock Absorber |
Weight | 1.670 kg |
Shock Absorber Mounting Type | Top eye, Bottom eye |
Mounting bores distance | 401 mm |
Max. Length | 401 mm |
Min. Length | 280 mm |
Pipe Diameter | 54 mm |
Type | Shock Absorber |
Function | Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Control/Trailing Arm, wheel suspension |
Placement on Vehicle | Rear Axle Right |
Material | Aluminium |
Steering arm type | Control Arm |
Paired article numbers | 34675 |
Weight | 1.01 kg |
Extra Description | ProKit |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with ball joint, with rubber mount |
Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (12582)
Important compatibility info
Weight | 0.92 kg |
Placement on Vehicle | Right |
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber), Plastic, Rubber/Metal |
Bearing/Mounting Type | Hydro Mount |
Function | Mounting, engine |
Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Connectors / Ports | 4 |
Cable Length | 535 mm. 435 mm |
Function | Knock Sensor |
Weight | 0.086 kg |
Type | Knock Sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle |
Additional Information 2 | with fastening material, with ball bearing |
Function | Repair Kit, suspension strut support mount |
Weight | 0.742 kg |
Type | Repair Kit, suspension strut support mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Screw (31043)
- 1x Febi Repair Kit, suspension strut support mount (31463)
Important compatibility info
Placement on Vehicle | Rear Axle |
Additional Information | with two sealing lips |
Material | FPM (fluoride rubber) |
Outer diameter | 151 mm |
Thickness | 11 mm |
Inner diameter | 116 mm |
Function | Shaft Seal, wheel hub |
Weight | 0.272 kg |
Type | Shaft Seal, wheel hub |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Bore Diameter | 19 mm |
Shock Absorber Type | Gas Pressure |
Shock Absorber System | Twin-Tube |
Shock Absorber Design | Telescopic Shock Absorber |
Weight | 1.340 kg |
Shock Absorber Mounting Type | Top eye, Bottom Pin |
Mounting bores distance | 354 mm |
Max. Length | 354 mm |
Min. Length | 234 mm |
Pipe Diameter | 53 mm. 45 mm |
Piston conrod diameter | 10 mm |
Type | Shock Absorber |
Function | Shock Absorber |
External Thread Size | M10 x 1,25 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 6.630 kg |
Rotor Style | Internally Vented |
Rim Hole Number | 5 -Hole |
Placement on Vehicle | Front Axle |
Outer diameter | 274 mm |
Thickness | 47.5 mm |
Brake Disc Thickness | 24 mm |
Minimum thickness | 22 mm |
Bolt Hole Circle Diameter | 114.3 mm |
Centering Diameter | 72 mm |
Surface | Coated |
Number of mounting bores | 3 |
Type | Brake Disc Rotor |
Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.336 kg |
Type | Mounting Kit, charger |
Function | Mounting Kit, charger |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Brake Caliper |
Placement on Vehicle | Front Axle Left |
Material | Cast Iron |
Brake Caliper Type | Brake Caliper (1 piston) |
Paired article numbers | 179464 |
Weight | 4.766 kg |
Function | Brake Caliper |
Brake caliper piston diameter | 60 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 7.2 kg |
Type | Brake Shaft, drum brake |
Screw length below head | 676 mm |
Function | Brake Shaft, drum brake |
Paired article numbers | 174148 |
Number of Teeth | 10 |
Outer diameter | 67.4 mm |
Length | 740 mm |
Placement on Vehicle | Right |
External Thread Size | M22 x 1,5 |
Brake Shaft Cam | S-cam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Brake Caliper |
Placement on Vehicle | Front Axle Right |
Material | Cast Iron |
Brake Caliper Type | Brake Caliper (1 piston) |
Paired article numbers | 179463 |
Weight | 4.766 kg |
Function | Brake Caliper |
Brake caliper piston diameter | 60 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.45 kg |
Width | 30 mm |
Outer diameter | 157 mm |
Inner diameter | 95 mm |
Bolt Hole Circle Diameter | 20 mm |
Parameter | 6PK |
Function | Belt Pulley, crankshaft |
Type | Belt Pulley, crankshaft |
Number of Ribs | 6 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Brake Caliper |
Placement on Vehicle | Rear Axle Left |
Material | Cast Iron |
Brake Caliper Type | Brake Caliper (1 piston) |
Paired article numbers | 178085 |
Weight | 3.12 kg |
Function | Brake Caliper |
Brake caliper piston diameter | 42 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Brake Caliper |
Placement on Vehicle | Rear Axle Right |
Material | Cast Iron |
Brake Caliper Type | Brake Caliper (1 piston) |
Paired article numbers | 178084 |
Weight | 3.12 kg |
Function | Brake Caliper |
Brake caliper piston diameter | 42 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023