Important compatibility info
Weight | 0.68 kg |
Width of castor bearing surface | 24 mm |
Outer diameter | 65 mm |
Operating Mode | Automatic |
Type | Belt Tensioner, v-ribbed belt |
Housing material | Aluminium |
Function | Belt Tensioner, v-ribbed belt |
Track rollers material | Plastic |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Connectors / Ports | 3 |
Ignition Coil | 4 Spark |
Function | Ignition Coil |
Weight | 0.9 kg |
Type | Ignition Coil |
for OE number | 7648797 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.934 kg |
Paired article numbers | 179439 |
Type | Brake Caliper |
Function | Brake Caliper |
Placement on Vehicle | Rear Axle Left |
Material | Cast Aluminium |
Brake Caliper Type | Brake Caliper (1 piston) |
Brake caliper piston diameter | 38 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Seal Material | Rubber |
Additional Information | with gasket/seal |
Weight | 1.2 kg |
Number of Wings | 7 |
Type | Water Pump, engine cooling |
Function | Water Pump, engine cooling |
Water pump impeller material | Metal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 3.655 kg |
Additional Information 2 | with integrated magnetic sensor ring, Wheel Bearing integrated into wheel hub, with ABS sensor ring |
Inner diameter | 30 mm |
Outer diameter | 80 mm |
Placement on Vehicle | Rear Axle Right, Rear Axle Left |
Width | 64 mm |
Function | Wheel Bearing Kit |
Type | Wheel Bearing Kit |
Bearing Type | Angular Ball Bearing |
Additional Information | with fastening/mounting material |
Replaces | 102780 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Rim Hole Number | 5 -Hole |
Rotor Style | Solid |
Weight | 4.52 kg |
Placement on Vehicle | Rear Axle |
Outer diameter | 284 mm |
Brake Disc Thickness | 10 mm |
Bolt Hole Circle Diameter | 120 mm |
Centering Diameter | 75 mm |
Surface | Coated |
Function | Brake Disc |
Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Wear Warning Contact | excl. wear warning contact |
Inspection Tag | ECE R90 Approved |
Thickness/Strength 1 | 22 mm |
Function | Brake Pad Set, disc brake |
Placement on Vehicle | Front Axle, Rear Axle |
Width | 78 mm |
Length | 175.4 mm |
Type | Brake Pad Set, disc brake |
Weight | 4.6 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Right |
Material | Cast Iron |
Brake Caliper Type | Brake Caliper (1 piston) |
Paired article numbers | 185646 |
Brake caliper piston diameter | 60 mm |
Function | Brake Caliper |
Weight | 4.2 kg |
Type | Brake Caliper |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left |
Type | Brake Caliper |
Brake caliper piston diameter | 60 mm |
Function | Brake Caliper |
Material | Cast Iron |
Weight | 4.2 kg |
Paired article numbers | 185647 |
Brake Caliper Type | Brake Caliper (1 piston) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
for OE number | 7PP 819 810 A |
Weight | 0.182 kg |
Type | Coolant Control Valve |
Function | Coolant Control Valve |
Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Brake Shaft, drum brake |
Screw length below head | 423 mm |
Paired article numbers | 45517 |
Weight | 5.6 kg |
Internal Thread Size | M12 x 1,5 |
Outer diameter | 110 mm |
Length | 474 mm |
Placement on Vehicle | Rear Axle Right |
Number of Teeth | 10 |
Type | Brake Shaft, drum brake |
Brake Shaft Cam | S-cam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.9 kg |
Internal Thread Size | M24 x 1,5 |
Additional Information | with lock nut |
Type | Angled Ball Joint / Tie Rod End |
Function | Angled Ball Joint / Tie Rod End |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 80 mm |
Cone Size | 30 mm |
Extra Description | ProKit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 416 mm |
Filter type | Filter Insert |
Outer diameter | 332 mm |
Inner diameter | 211 mm |
Function | Air Filter |
Weight | 3.722 kg |
Type | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Screw length below head | 402 mm |
Paired article numbers | 45518 |
Placement on Vehicle | Rear Axle Left |
Outer diameter | 110 mm |
Weight | 5.6 kg |
Function | Brake Shaft, drum brake |
Number of Teeth | 10 |
Type | Brake Shaft, drum brake |
Internal Thread Size | M12 x 1,5 |
Length | 456 mm |
Brake Shaft Cam | S-cam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Steering arm type | Control Arm |
Paired article numbers | 180938 |
Additional Information 2 | with ball joint |
Material | Sheet Steel |
Placement on Vehicle | Front Axle Left, Lower |
Additional Information | with rubber mounts |
Weight | 3.97 kg |
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Passenger Side |
Paired article numbers | 107152 |
Cable Length | 500 mm |
Number of circuits | 21 |
Function | Cable Repair Set, door |
Extra Description | febi Plus |
Type | Cable Repair Set, door |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.310 kg |
Number of mounting bores | 3 |
Type | Central Slave Cylinder, clutch |
Function | Central Slave Cylinder, clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Inner diameter | 30 mm |
Additional Information 2 | Wheel Bearing integrated into wheel hub |
Outer diameter | 66 mm |
Width | 66 mm |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Weight | 1.980 kg |
Type | Wheel Bearing Kit |
Bearing Type | Angular Ball Bearing |
Function | Wheel Bearing Kit |
Additional Information | with axle nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 3.500 kg |
Placement on Vehicle | Front Axle Left, Lower |
Material | Cast Steel |
Steering arm type | Control Arm |
Paired article numbers | 18425 |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Additional Information | with rubber mounts, with holder |
Additional Information 2 | with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Wheel Side |
Type | Joint Kit, drive shaft |
Seal Diameter | 72.5 mm |
Length | 189 mm |
Weight | 4.040 kg |
External Thread Size | M28 x 1,5 |
Function | Joint Kit, drive shaft |
Outer diameter | 106 mm |
External Teeth, Wheel Side | 30 |
Internal Teeth, wheel side | 29 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023