Proud to be a UK-based company
Contact us
Important compatibility info
| Weight | 1.015 kg |
| Number of Wings | 6 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Metal |
| Seal Material | Metal |
| Material | Cast Aluminium |
| Additional Information | with gasket/seal |
| Type | Water Pump, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£52.22
Important compatibility info
| Weight | 1.058 kg |
| Function | Parts Set, maintenance service |
| Type | Parts Set, maintenance service |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Oil Filter (37478)
- 1x Febi Air Filter (36042)
- 1x Febi Fuel filter (34178)
- 1x Febi Filter, cabin air (31168)
- 1x Febi Screw Plug, oil sump (08277)
- 1x Febi Seal Ring, oil drain plug (07215)
£52.22
Important compatibility info
| Material | Rubber/Metal |
| Placement on Vehicle | Front Axle |
| Weight | 1.566 kg |
| Additional Information 2 | with ball bearing |
| Type | Repair Kit, suspension strut support mount |
| Function | Repair Kit, suspension strut support mount |
| for OE number | 77 01 207 537 S1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension Strut Support Mount (22283)
- 1x Febi Suspension Strut Support Mount (29587)
- 1x Febi Suspension Strut Support Mount (32241)
- 1x Febi Rolling Bearing, suspension strut support mount (22305)
£52.22
Important compatibility info
| Housing material | Aluminium |
| Inspection Tag | EMC, ADR |
| Weight | 0.518 kg |
| Extra Description | ProKit |
| Height | 134 mm |
| Width | 105 mm |
| Rated Power | 18 W |
| Light Design | LED |
| Mounting Type | Fully assembled |
| Cable Length | 280 mm |
| Depth | 52 mm |
| Voltage from | 9 V |
| Light Distribution | Long-range illumination |
| Voltage to | 36 V |
| Protection Type (IP Code) | IP6K9K |
| Fulfils ECE norm | R10, R23 |
| Lumen | 1440 lm |
| Temperature range from | -30 °C |
| Temperature range to | 50 °C |
| Function | Worklight |
| Type | Worklight |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£52.22
Important compatibility info
| Weight | 0.157 kg |
| Function | Tensioner, timing chain |
| Operating Mode | Hydraulic |
| Type | Tensioner, timing chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£52.22
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Length | 650 mm |
| Number of Connectors / Ports | 2 |
| Function | Sensor, wheel speed |
| Weight | 0.040 kg |
| Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£52.22
Important compatibility info
| Weight | 0.07 kg |
| Number of Connectors / Ports | 2 |
| Type | Sensor, exhaust gas temperature |
| Function | Sensor, exhaust gas temperature |
| for OE number | 55566086 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£52.22
Important compatibility info
| Placement on Vehicle | Front Axle Left, Rear, inner, Front Axle Right |
| Material | Rubber/Metal |
| Outer diameter | 74 mm |
| Thickness | 80 mm |
| Inner diameter | 12 mm |
| Weight | 0.501 kg |
| Bearing/Mounting Type | Hydro Mount |
| Type | Mounting, control/trailing arm |
| Function | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£52.22
Important compatibility info
| Type | Timing Chain Kit |
| Timing Chain Size | G67WZ |
| Number of Chain Links | 46 |
| Weight | 0.609 kg |
| Chain Type | Simplex, with chain lock |
| Function | Timing Chain Kit |
| Extra Description | Standard Medium Kit |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Gear/Sprocket, camshaft (25108)
- 1x Febi Sprocket, crankshaft (25110)
- 1x Febi Timing Chain (25117)
£52.22
Important compatibility info
| Function | Charge Air Hose |
| Turbocharger line | Turbocharger to Inlet Manifold |
| Inner diameter 2 | 50 mm |
| Inner diameter 1 | 41 mm |
| Type | Charge Air Hose |
| Weight | 0.380 kg |
| Additional Information 2 | with clamps |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£52.22
Important compatibility info
| Number of Connectors / Ports | 4 |
| Function | Sensor, intake manifold pressure |
| Weight | 0.025 kg |
| Type | Sensor, intake manifold pressure |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£52.22
Important compatibility info
| Weight | 0.454 kg |
| Width | 39.3 mm |
| Outer diameter | 55.7 mm |
| Inner diameter | 17 mm |
| Number of Ribs | 6 |
| Tightening Torque | 85 Nm |
| Function | Alternator Freewheel Clutch |
| Additional Information 2 | with lid |
| Type | Alternator Freewheel Clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£52.22
Important compatibility info
| Material | Aluminium |
| Function | Brake Master Cylinder |
| Type | Brake Master Cylinder |
| Weight | 0.583 kg |
| Piston Diameter | 25.4 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£52.22
Important compatibility info
| Additional Information | with fastening/mounting material |
| Weight | 2.34 kg |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Width | 46 mm |
| Outer diameter | 100 mm |
| Inner diameter | 51 mm |
| Bearing Type | Angular Ball Bearing |
| Type | Wheel Bearing Kit |
| Function | Wheel Bearing Kit |
| Additional Information 2 | with integrated magnetic sensor ring, Wheel Bearing integrated into wheel hub, with ABS sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Wheel Bearing Kit (28506)
- 1x Febi Nut, kingpin (12181)
- 4x Febi Screw (28622)
£52.22
Important compatibility info
| Seal Material | Paper |
| Function | Water Pump, engine cooling |
| Material | Cast Aluminium |
| Additional Information | with gasket/seal |
| Weight | 0.91 kg |
| Number of Wings | 7 |
| Type | Water Pump, engine cooling |
| Water pump impeller material | Metal |
| Belt Pulley Diameter | 95 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£52.23
Important compatibility info
| Weight | 0.050 kg |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Number of Connectors / Ports | 2 |
| Cable Length | 1106 mm |
| Function | Sensor, wheel speed |
| Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£52.23
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Material | Rubber/Metal |
| Additional Information 2 | without ball bearing |
| Weight | 0.885 kg |
| Type | Suspension Strut Support Mount |
| Function | Suspension Strut Support Mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£52.23
Important compatibility info
| Placement on Vehicle | Front Axle |
| Outer diameter | 329 mm |
| Brake Disc Thickness | 34 mm |
| Brake Disc Type | Internally Vented |
| Minimum thickness | 28 mm |
| Bolt Hole Circle Diameter | 118 mm |
| Surface | Coated |
| Number of mounting bores | 2 |
| Function | Brake Disc |
| Rim Hole Number | 10 -Hole |
| Type | Brake Disc |
| Weight | 14.860 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£52.24
Important compatibility info
| Weight | 0.33 kg |
| Number of Teeth | 48 |
| Chain Type | Silent Chain, Closed chain |
| Number of Chain Links | 86 |
| Function | Chain Kit, oil pump drive |
| Type | Chain Kit, oil pump drive |
| Wet Boiling Point | 180 °C |
| Timing Chain Size | Z46VC, Z46 |
| Extra Description | Standard Medium Kit |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Sprocket/Gear, oil pump (33932)
- 1x Febi Chain Tensioner, oil pump drive (33934)
- 1x Febi Chain, oil pump drive (33931)
£52.25
Important compatibility info
| Weight | 0.4 kg |
| Type | Gasket, cylinder head |
| Thickness | 1.2 mm |
| Bore Diameter | 89 mm |
| Function | Gasket, cylinder head |
| Material | Metal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£52.25
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023