Important compatibility info
Weight | 1.058 kg |
Function | Parts Set, maintenance service |
Type | Parts Set, maintenance service |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Oil Filter (37478)
- 1x Febi Air Filter (36042)
- 1x Febi Fuel filter (34178)
- 1x Febi Filter, cabin air (31168)
- 1x Febi Screw Plug, oil sump (08277)
- 1x Febi Seal Ring, oil drain plug (07215)
Important compatibility info
Placement on Vehicle | Front Axle Right |
Additional Information 2 | with nut |
Thread Size | M20x1,5 |
External Teeth, Wheel Side | 21 |
Weight | 5.912 kg |
External Teeth, Diff.Side | 23 |
Min. Length | 717 mm |
ABS Ring Diameter | 85 mm |
Wheel Sided Joint Diameter | 83 mm |
Transmission-side joint diameter | 80.5 mm |
Type | Drive Shaft |
Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Material | Rubber/Metal |
Additional Information 2 | without ball bearing |
Weight | 0.885 kg |
Type | Suspension Strut Support Mount |
Function | Suspension Strut Support Mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.050 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Number of Connectors / Ports | 2 |
Cable Length | 1106 mm |
Function | Sensor, wheel speed |
Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Seal Material | Paper |
Function | Water Pump, engine cooling |
Material | Cast Aluminium |
Additional Information | with gasket/seal |
Weight | 0.91 kg |
Number of Wings | 7 |
Type | Water Pump, engine cooling |
Water pump impeller material | Metal |
Belt Pulley Diameter | 95 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle |
Outer diameter | 329 mm |
Brake Disc Thickness | 34 mm |
Brake Disc Type | Internally Vented |
Minimum thickness | 28 mm |
Bolt Hole Circle Diameter | 118 mm |
Surface | Coated |
Number of mounting bores | 2 |
Function | Brake Disc |
Rim Hole Number | 10 -Hole |
Type | Brake Disc |
Weight | 14.860 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.33 kg |
Number of Teeth | 48 |
Chain Type | Silent Chain, Closed chain |
Number of Chain Links | 86 |
Function | Chain Kit, oil pump drive |
Type | Chain Kit, oil pump drive |
Wet Boiling Point | 180 °C |
Timing Chain Size | Z46VC, Z46 |
Extra Description | Standard Medium Kit |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Sprocket/Gear, oil pump (33932)
- 1x Febi Chain Tensioner, oil pump drive (33934)
- 1x Febi Chain, oil pump drive (33931)
Important compatibility info
Weight | 0.4 kg |
Type | Gasket, cylinder head |
Thickness | 1.2 mm |
Bore Diameter | 89 mm |
Function | Gasket, cylinder head |
Material | Metal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Right, Rear Axle Left |
Bore Diameter | 12 mm |
Shock Absorber Type | Gas Pressure |
Shock Absorber System | Twin-Tube |
Shock Absorber Design | Telescopic Shock Absorber |
Weight | 1.660 kg |
Shock Absorber Mounting Type | Top eye, Bottom eye |
Mounting bores distance | 470 mm |
Max. Length | 470 mm |
Min. Length | 304 mm |
Pipe Diameter | 53 mm. 45 mm |
Type | Shock Absorber |
Function | Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.07 kg |
Number of Connectors / Ports | 2 |
Function | Sensor, exhaust gas temperature |
Type | Sensor, exhaust gas temperature |
Placement on Vehicle | behind exhaust turbocharger |
for OE number | 045 906 088 J |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
for OE number | 74 22 203 109 SK3 |
Function | Sealing Set, air compressor |
Weight | 0.5 kg |
Type | Sealing Set, air compressor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 3.9 kg |
Placement on Vehicle | Front Axle Left |
Material | Sheet Steel |
Steering arm type | Control Arm |
Paired article numbers | 41807 |
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Additional Information 2 | without ball joint |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 879 mm |
Outer diameter | 36 mm |
Rod/Strut | Push Rod |
Cone Size | 28.6 mm |
Pipe Diameter | 36 mm |
Function | Centre Rod Assembly |
Weight | 5.685 kg |
Internal Thread Size | M28 x 1,5 RHT |
External Thread Size | M20 x 1,5 |
Extra Description | ProKit |
Type | Centre Rod Assembly |
Additional Information | with castellated nut and split pins |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Link/Coupling Rod, stabiliser bar |
Type | Link/Coupling Rod, stabiliser bar |
Weight | 2.20 kg |
Rod/Strut | Coupling Rod |
Paired article numbers | 172296 |
External Thread Size | M20 x 1,5 |
Thickness | 105 mm |
Material | Steel |
Length | 300 mm |
Placement on Vehicle | Rear Axle Right |
Additional Information | with nuts |
Extra Description | ProKit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.365 kg |
Function | Tensioner, timing chain |
Type | Tensioner, timing chain |
Additional Information | with gasket/seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Housing length | 206 mm |
Function | Gas Spring, boot/cargo area |
Type | Gas Spring, boot/cargo area |
Piston conrod diameter | 6 mm |
Mounting points diameter | 16.5 mm |
Stroke | 135 mm |
Eject Force | 288 N |
Housing Diameter | 16 mm |
Weight | 0.2 kg |
Length | 363 mm |
Placement on Vehicle | Right Rear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 158 mm |
Weight | 3.1 kg |
Placement on Vehicle | Rear Axle |
Length | 263 mm |
Spring Design | Coil spring with inconstant wire diameter |
Function | Suspension Spring |
Type | Suspension Spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 3.9 kg |
Placement on Vehicle | Front Axle Right |
Material | Sheet Steel |
Steering arm type | Control Arm |
Paired article numbers | 41806 |
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Additional Information 2 | without ball joint |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Steering arm type | Control Arm |
Type | Control/Trailing Arm, wheel suspension |
Length | 400 mm |
Weight | 0.570 kg |
Function | Control/Trailing Arm, wheel suspension |
Placement on Vehicle | Rear Axle Left, Rear Axle Right, Lower, Front |
Material | Sheet Steel |
Inner diameter | 12 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.308 kg |
Placement on Vehicle | Front Axle Right, Rear, Lower |
Material | Steel |
Steering arm type | Control Arm |
Paired article numbers | 44228 |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with rubber mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Width | 37 mm |
Function | Wheel Bearing Kit |
Bearing Type | Angular Ball Bearing |
Bolt Hole Circle Diameter | 110 mm |
Outer diameter | 78 mm. 138 mm |
Inner diameter | 29 mm |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Weight | 2.90 kg |
Type | Wheel Bearing Kit |
Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with ABS sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Teeth, Wheel Side | 38 |
Weight | 6.858 kg |
Number of mounting bores | 6 |
Function | Drive Shaft |
Type | Drive Shaft |
Transmission-side joint diameter | 81.5 mm |
Min. Length | 510 mm |
ABS Ring Diameter | 83 mm |
Wheel Sided Joint Diameter | 98 mm |
Bore Diameter | 11 mm |
Bolt Hole Circle Diameter | 104 mm |
Thread Size | M16x1,5 |
Additional Information 2 | with screw |
Placement on Vehicle | Front Axle Right, Front Axle Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Control/Trailing Arm, wheel suspension |
Steering arm type | Control Arm |
Material | Sheet Steel |
Placement on Vehicle | Lower Front Axle, Right |
Paired article numbers | 29651 |
Weight | 4.820 kg |
Type | Control/Trailing Arm, wheel suspension |
Additional Information | with rubber mounts, with holder |
Additional Information 2 | without ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Coils | 6.5 |
Function | Suspension Spring |
Outer diameter | 162 mm |
Length | 343 mm |
Placement on Vehicle | Rear Axle |
Weight | 4.05 kg |
Wire Diameter | 16 mm |
Type | Suspension Spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.31 kg |
Placement on Vehicle | Lower Front Axle, Left |
Material | Aluminium |
Steering arm type | Control Arm |
Paired article numbers | 40372 |
Function | Control/Trailing Arm, wheel suspension |
Extra Description | ProKit |
Type | Control/Trailing Arm, wheel suspension |
Additional Information | with fastening/mounting material |
Additional Information 2 | with ball joint, with bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (21513)
- 1x Febi Screw (37927)
- 1x Febi Nut (34653)
Important compatibility info
Additional Information 2 | with crown nut |
Driver Position | for right-hand drive vehicles |
Placement on Vehicle | Front Axle |
Function | Idler Arm |
Weight | 1.4 kg |
Type | Idler Arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Belt Tensioner, v-ribbed belt |
Type | Belt Tensioner, v-ribbed belt |
Weight | 0.653 kg |
Operating Mode | Automatic |
Material | Aluminium |
Outer diameter | 65 mm |
Width of castor bearing surface | 24 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.340 kg |
Function | Track Rod Set |
Type | Track Rod Set |
Placement on Vehicle | Front Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Tie Rod End (29623)
- 1x Febi Tie Rod End (29624)
- 2x Febi Inner Tie Rod (27725)
- 2x Febi Bellow Kit, steering (29650)
Important compatibility info
Function | Repair Kit, kingpin |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Outer diameter | 51 mm. 50 mm |
Length | 222.5 mm |
Extra Description | ProKit |
Type | Repair Kit, kingpin |
Additional Information 2 | with bearing |
Additional Information | with Thrust Bearing |
Weight | 4.695 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Kingpin (06012)
- 1x Febi Bush, kingpin (06013)
- 1x Febi Bush, kingpin (06014)
- 1x Febi Repair Kit, kingpin (06018)
- 1x Febi Lock Ring, steering knuckle (03728)
- 1x Febi Bush, steering knuckle (34565)
- 2x Febi Seal Ring, steering knuckle (03725)
- 1x Febi Seal Ring, steering knuckle (03727)
- 2x Febi Circlip (03729)
- 1x Febi Seal Ring, steering knuckle (05868)
Important compatibility info
Weight | 2.1 kg |
Placement on Vehicle | Rear Axle |
Width | 59 mm |
Outer diameter | 56 mm |
Inner diameter | 43 mm |
Bearing Type | Angular Ball Bearing |
Type | Wheel Bearing Kit |
Function | Wheel Bearing Kit |
Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with ABS sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Expansion Tank, coolant |
Material | Plastic |
Weight | 0.59 kg |
Type | Expansion Tank, coolant |
Additional Information 2 | without lid |
Number of Connectors / Ports | 2 |
Additional Information | with coolant level sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Control/Trailing Arm, wheel suspension |
Steering arm type | Control Arm |
Paired article numbers | 29652 |
Placement on Vehicle | Lower Front Axle, Left |
Material | Sheet Steel |
Weight | 4.820 kg |
Type | Control/Trailing Arm, wheel suspension |
Additional Information | with holder, with rubber mounts |
Additional Information 2 | without ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.380 kg |
Type | Repair Kit, shift cylinder |
Function | Repair Kit, shift cylinder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Timing Chain |
Function | Timing Chain |
Weight | 0.383 kg |
Chain Type | Simplex, Closed chain |
Number of Chain Links | 134 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear, both sides |
Cable Length | 200 mm |
Number of circuits | 15 |
Function | Cable Repair Set, door |
Extra Description | febi Plus |
Type | Cable Repair Set, door |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | with crown nut |
Type | Link/Coupling Rod, stabiliser bar |
Extra Description | ProKit |
External Thread Size | M20 x 1,5 |
Paired article numbers | 174611 |
Rod/Strut | Coupling Rod |
Function | Link/Coupling Rod, stabiliser bar |
Length | 367 mm |
Placement on Vehicle | Front Axle |
Weight | 3.65 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Steering arm type | Control Arm |
Paired article numbers | 40371 |
Weight | 1.31 kg |
Placement on Vehicle | Lower Front Axle, Right Rear |
Material | Aluminium |
Function | Control/Trailing Arm, wheel suspension |
Extra Description | ProKit |
Type | Control/Trailing Arm, wheel suspension |
Additional Information | with fastening/mounting material |
Additional Information 2 | with bearing, with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (21514)
- 1x Febi Screw (37927)
- 1x Febi Nut (34653)
Important compatibility info
Material | ACM (Polyacrylate) |
Function | Gasket, cylinder head cover |
Length | 1185 mm |
Weight | 0.356 kg |
Type | Gasket, cylinder head cover |
for OE number | 20538793 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Rear, Lower |
Material | Steel |
Steering arm type | Control Arm |
Paired article numbers | 44229 |
Function | Control/Trailing Arm, wheel suspension |
Weight | 2.308 kg |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with rubber mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Height | 55 mm |
Length | 132 mm |
Function | Oil Cooler, engine oil |
Weight | 0.6 kg |
Material | Aluminium |
Width | 114 mm |
Type | Oil Cooler, engine oil |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Wire Diameter | 15.3 mm |
Length | 322 mm |
Outer diameter | 115 mm |
Weight | 3.1 kg |
Function | Suspension Spring |
Number of Coils | 7.3 |
Type | Suspension Spring |
Placement on Vehicle | Front Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Joint Kit, drive shaft |
Function | Joint Kit, drive shaft |
Placement on Vehicle | transmission sided, Front Axle Left, Front Axle Right |
External Teeth, Diff.Side | 34 |
Weight | 1.946 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.260 kg |
Type | Control, swirl covers (induction pipe) |
Operating Mode | Electric-pneumatic |
Function | Control, swirl covers (induction pipe) |
Valve type | Switch Valve |
Extra Description | febi Plus |
Number of Connectors / Ports | 2 |
Fault Code(s) | P2008 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 4.02 kg |
Function | Control/Trailing Arm, wheel suspension |
Paired article numbers | 37571 |
Steering arm type | Control Arm |
Material | Cast Steel |
Placement on Vehicle | Front Axle Right, Lower |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with ball joint |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Steering arm type | Control Arm |
Function | Control/Trailing Arm, wheel suspension |
Paired article numbers | 182071 |
Type | Control/Trailing Arm, wheel suspension |
Cone Size | 19 mm |
Weight | 4.450 kg |
Additional Information 2 | with ball joint |
Placement on Vehicle | Front Axle Right |
Material | Sheet Steel |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Additional Information | with fastening/mounting material |
Cone Size | 18 mm |
Weight | 2.65 kg |
Paired article numbers | 178855 |
Steering arm type | Control Arm |
Material | Sheet Steel |
Placement on Vehicle | Upper, Front Axle Left |
External Thread Size | M14 x 1,5 |
Additional Information 2 | with ball joint, with bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 78 mm |
Function | Deflection/Guide Pulley, v-ribbed belt |
Weight | 0.877 kg |
Width of castor bearing surface | 28 mm |
Material | Metal |
Width | 48 mm |
Type | Deflection/Guide Pulley, v-ribbed belt |
Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Lower |
Paired article numbers | 41817 |
Function | Ball Joint |
Weight | 1.150 kg |
Type | Ball Joint |
Steering arm type | for control arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 3.84 kg |
Placement on Vehicle | Left Front |
Additional Information | without electric motor |
Operating Mode | Manual |
Paired article numbers | 174024 |
Type | Window Regulator |
Function | Window Regulator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Chain Type | Simplex, Closed chain |
Number of Chain Links | 120 |
Timing Chain Size | G53HR |
Function | Timing Chain |
Type | Timing Chain |
Weight | 0.327 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023