Important compatibility info
Voltage | 12 V |
Operating Mode | Electric |
Type | Auxiliary water pump (cooling water circuit) |
Function | Auxiliary water pump (cooling water circuit) |
Weight | 0.25 kg |
Number of Connectors / Ports | 3 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 4.3 kg |
Additional Information | with nuts |
External Thread Size | M24 x 1,5 |
Placement on Vehicle | Rear Axle |
Length | 435 mm |
Rod/Strut | Coupling Rod |
Cone Size | 32.2 mm |
Adjustable | not adjustable |
Pipe Diameter | 36 mm |
Type | Link/Coupling Rod, stabiliser bar |
Function | Link/Coupling Rod, stabiliser bar |
Extra Description | ProKit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.258 kg |
Outer diameter | 33 mm |
Opening Temperature | 95 °C |
Type | Thermostat, coolant |
Function | Thermostat, coolant |
Additional Information | with gasket/seal, with temperature sensor |
Housing Type | with housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.365 kg |
Function | Tensioner, timing chain |
Type | Tensioner, timing chain |
Additional Information | with gasket/seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.083 kg |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Length | 1225 mm |
Number of Connectors / Ports | 2 |
Function | Sensor, wheel speed |
Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.416 kg |
Width of castor bearing surface | 39 mm |
Outer diameter | 74 mm |
Operating Mode | Automatic |
Housing material | Aluminium |
Function | Belt Tensioner, v-ribbed belt |
Track rollers material | Plastic |
Type | Belt Tensioner, v-ribbed belt |
for OE number | 2 863 219 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | with crown nut |
Driver Position | for right-hand drive vehicles |
Placement on Vehicle | Front Axle |
Function | Idler Arm |
Weight | 1.4 kg |
Type | Idler Arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 879 mm |
Outer diameter | 36 mm |
Rod/Strut | Push Rod |
Cone Size | 28.6 mm |
Pipe Diameter | 36 mm |
Function | Centre Rod Assembly |
Weight | 5.685 kg |
Internal Thread Size | M28 x 1,5 RHT |
External Thread Size | M20 x 1,5 |
Extra Description | ProKit |
Type | Centre Rod Assembly |
Additional Information | with castellated nut and split pins |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Drive Shaft |
Weight | 5.780 kg |
External Teeth, Wheel Side | 36 |
Bolt Hole Circle Diameter | 86 mm |
Wheel Sided Joint Diameter | 89 mm |
Transmission-side joint diameter | 100 mm |
Function | Drive Shaft |
Additional Information 2 | with nut |
Thread Size | M20x1,5 |
Number of mounting bores | 6 |
Min. Length | 558 mm |
Placement on Vehicle | Front Axle Left |
Additional Information | with grease |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Steel |
Steering arm type | Control Arm |
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Weight | 1.705 kg |
Placement on Vehicle | Front Axle Left, Lower, Rear, Front Axle Right |
Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (46193)
- 1x Febi Nut (21557)
Important compatibility info
Housing length | 276.5 mm |
Function | Gas Spring, boot/cargo area |
Type | Gas Spring, boot/cargo area |
Piston conrod diameter | 8 mm |
Mounting points diameter | 17.8 mm |
Stroke | 194 mm |
Eject Force | 355 N |
Housing Diameter | 18 mm |
Weight | 0.2 kg |
Length | 504 mm |
Placement on Vehicle | Right Rear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | with tensioner element |
Number of Ribs | 5 |
Length | 491 mm |
Weight | 0.590 kg |
Function | V-Ribbed Belt Set |
Type | V-Ribbed Belt Set |
Belt Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi V-Ribbed Belt (176318)
- 1x Febi Belt Tensioner, v-ribbed belt (40327)
Important compatibility info
Housing Type | with housing |
Type | Thermostat, coolant |
Opening Temperature | 80 °C |
Function | Thermostat, coolant |
Weight | 0.180 kg |
Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | with seal ring |
Weight | 0.223 kg |
Opening Temperature | 105 °C |
Type | Thermostat, coolant |
Function | Thermostat, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Spanner Size | 27 |
Number of Connectors / Ports | 3 |
Function | Stop Light Switch |
Additional Information 2 | with nut |
Weight | 0.071 kg |
External Thread Size | M22 x 1 |
Operating Mode | Pneumatic |
Type | Stop Light Switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 7.518 kg |
Rotor Style | Internally Vented |
Placement on Vehicle | Front Axle |
Outer diameter | 296 mm |
Thickness | 76 mm |
Brake Disc Thickness | 22 mm |
Minimum thickness | 20.4 mm |
Bolt Hole Circle Diameter | 120 mm |
Centering Diameter | 79 mm |
Surface | Coated |
Number of mounting bores | 1 |
Function | Brake Disc |
Rim Hole Number | 5 -Hole |
Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Sensor, exhaust gas temperature |
Weight | 0.049 kg |
External Thread Size | M14 x 1,5 |
Function | Sensor, exhaust gas temperature |
Lambda Sensor | Heated |
Cable Length | 215 mm |
Number of Connectors / Ports | 2 |
Placement on Vehicle | before soot particulate filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.24 kg |
Width | 25 mm |
Outer diameter | 148 mm |
Inner diameter | 44 mm |
Number of Ribs | 5 |
Parameter | 6PK |
Function | Belt Pulley, crankshaft |
Type | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Cable Pull, manual transmission |
Weight | 0.504 kg |
Function | Cable Pull, manual transmission |
Placement on Vehicle | Left |
Inner length 1 | 1154 mm |
Outer length 1 | 1170 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Link/Coupling Rod, stabiliser bar |
Type | Link/Coupling Rod, stabiliser bar |
Weight | 2.20 kg |
Rod/Strut | Coupling Rod |
Paired article numbers | 172296 |
External Thread Size | M20 x 1,5 |
Thickness | 105 mm |
Material | Steel |
Length | 300 mm |
Placement on Vehicle | Rear Axle Right |
Additional Information | with nuts |
Extra Description | ProKit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Extra Description | febi Plus |
Function | Control Valve, camshaft adjustment |
Type | Control Valve, camshaft adjustment |
Weight | 0.171 kg |
Number of Connectors / Ports | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Wire Diameter | 15.3 mm |
Length | 322 mm |
Outer diameter | 115 mm |
Weight | 3.1 kg |
Function | Suspension Spring |
Number of Coils | 7.3 |
Type | Suspension Spring |
Placement on Vehicle | Front Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Joint Kit, drive shaft |
Function | Joint Kit, drive shaft |
Placement on Vehicle | transmission sided, Front Axle Left, Front Axle Right |
External Teeth, Diff.Side | 34 |
Weight | 1.946 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.07 kg |
Number of Connectors / Ports | 2 |
Function | Sensor, exhaust gas temperature |
Type | Sensor, exhaust gas temperature |
Placement on Vehicle | behind exhaust turbocharger |
for OE number | 045 906 088 J |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Rear, Lower |
Material | Steel |
Steering arm type | Control Arm |
Paired article numbers | 44229 |
Function | Control/Trailing Arm, wheel suspension |
Weight | 2.308 kg |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with rubber mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left |
Cone Size 2 | 16.6 mm |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Cone Size | 14 mm |
Weight | 4.493 kg |
Material | Sheet Steel |
Steering arm type | Control Arm |
Paired article numbers | 185167 |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 6.422 kg |
External Teeth, Wheel Side | 36 |
Bore Diameter | 10.5 mm |
Bolt Hole Circle Diameter | 94 mm |
Thread Size | M20x1,5 |
Additional Information 2 | with nut |
Wheel Sided Joint Diameter | 97 mm |
Number of mounting bores | 6 |
Min. Length | 517 mm |
Function | Drive Shaft |
Type | Drive Shaft |
Transmission-side joint diameter | 108 mm |
Placement on Vehicle | Front Axle Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Repair Kit, kingpin |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Outer diameter | 51 mm. 50 mm |
Length | 222.5 mm |
Extra Description | ProKit |
Type | Repair Kit, kingpin |
Additional Information 2 | with bearing |
Additional Information | with Thrust Bearing |
Weight | 4.695 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Kingpin (06012)
- 1x Febi Bush, kingpin (06013)
- 1x Febi Bush, kingpin (06014)
- 1x Febi Repair Kit, kingpin (06018)
- 1x Febi Lock Ring, steering knuckle (03728)
- 1x Febi Bush, steering knuckle (34565)
- 2x Febi Seal Ring, steering knuckle (03725)
- 1x Febi Seal Ring, steering knuckle (03727)
- 2x Febi Circlip (03729)
- 1x Febi Seal Ring, steering knuckle (05868)
Important compatibility info
Weight | 1.31 kg |
Placement on Vehicle | Lower Front Axle, Left |
Material | Aluminium |
Steering arm type | Control Arm |
Paired article numbers | 40372 |
Function | Control/Trailing Arm, wheel suspension |
Extra Description | ProKit |
Type | Control/Trailing Arm, wheel suspension |
Additional Information | with fastening/mounting material |
Additional Information 2 | with ball joint, with bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (21513)
- 1x Febi Screw (37927)
- 1x Febi Nut (34653)
Important compatibility info
Weight | 0.248 kg |
External Thread Size | M8 x 1,25 |
Length | 110 mm |
Number of Connectors / Ports | 3 |
Mounting points diameter | 8.6 mm |
Function | Sensor, pneumatic suspension level |
Type | Sensor, pneumatic suspension level |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Width | 37 mm |
Function | Wheel Bearing Kit |
Bearing Type | Angular Ball Bearing |
Bolt Hole Circle Diameter | 110 mm |
Outer diameter | 78 mm. 138 mm |
Inner diameter | 29 mm |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Weight | 2.90 kg |
Type | Wheel Bearing Kit |
Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with ABS sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.340 kg |
Function | Track Rod Set |
Type | Track Rod Set |
Placement on Vehicle | Front Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Tie Rod End (29623)
- 1x Febi Tie Rod End (29624)
- 2x Febi Inner Tie Rod (27725)
- 2x Febi Bellow Kit, steering (29650)
Important compatibility info
Function | Resistor, interior blower |
Weight | 0.250 kg |
Extra Description | febi Plus |
Type | Resistor, interior blower |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Height | 55 mm |
Length | 132 mm |
Function | Oil Cooler, engine oil |
Weight | 0.6 kg |
Material | Aluminium |
Width | 114 mm |
Type | Oil Cooler, engine oil |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Right |
Weight | 0.496 kg |
Function | Cable Pull, manual transmission |
Outer length 1 | 1262 mm |
Inner length 1 | 893 mm |
Type | Cable Pull, manual transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle |
Length | 351 mm |
Outer diameter | 178 mm |
Function | Suspension Spring |
Number of Coils | 5.3 |
Weight | 3.83 kg |
Type | Suspension Spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Steering arm type | Control Arm |
Paired article numbers | 40371 |
Weight | 1.31 kg |
Placement on Vehicle | Lower Front Axle, Right Rear |
Material | Aluminium |
Function | Control/Trailing Arm, wheel suspension |
Extra Description | ProKit |
Type | Control/Trailing Arm, wheel suspension |
Additional Information | with fastening/mounting material |
Additional Information 2 | with bearing, with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (21514)
- 1x Febi Screw (37927)
- 1x Febi Nut (34653)
Important compatibility info
Thickness | 1.75 mm |
Inner diameter | 91 mm |
Weight | 0.244 kg |
Type | Gasket, cylinder head |
Function | Gasket, cylinder head |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.837 kg |
Outer diameter | 74 mm |
Width | 63 mm |
Type | Tensioner Pulley, V-ribbed belt |
Mounting points diameter | 10 mm |
Material | Metal |
Width of castor bearing surface | 33 mm |
Function | Tensioner Pulley, V-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.66 kg |
Outer diameter | 148 mm |
Thickness | 30 mm |
Inner diameter | 29 mm |
Number of Ribs | 6 |
Parameter | 7PK |
Function | Belt Pulley, crankshaft |
Type | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Right, outer |
Length | 325 mm |
Diameter | 1 mm |
Material | Steel |
Thickness | 360 mm |
Spanner Size | 18 |
Rod/Strut | Coupling Rod |
Thread Length | 22 mm |
Weight | 0.805 kg |
Type | Link/Coupling Rod, stabiliser bar |
Function | Link/Coupling Rod, stabiliser bar |
External Thread Size | M12 x 1,5 |
Paired article numbers | 193718 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Upper |
Weight | 0.241 kg |
Chain Type | Simplex, Closed chain |
Number of Chain Links | 100 |
Type | Timing Chain |
Function | Timing Chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Control/Trailing Arm, wheel suspension |
Steering arm type | Control Arm |
Material | Sheet Steel |
Placement on Vehicle | Lower Front Axle, Right |
Paired article numbers | 29651 |
Weight | 4.820 kg |
Type | Control/Trailing Arm, wheel suspension |
Additional Information | with rubber mounts, with holder |
Additional Information 2 | without ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Cooling Hose | from engine cooler to water pump |
Function | Radiator Hose |
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber), Plastic |
Hose Length | 215 mm |
Weight | 0.456 kg |
Additional Information 2 | with quick couplers |
Type | Radiator Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | with crown nut |
Type | Link/Coupling Rod, stabiliser bar |
Extra Description | ProKit |
External Thread Size | M20 x 1,5 |
Paired article numbers | 174611 |
Rod/Strut | Coupling Rod |
Function | Link/Coupling Rod, stabiliser bar |
Length | 367 mm |
Placement on Vehicle | Front Axle |
Weight | 3.65 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Cast Aluminium |
Water pump impeller material | Metal |
Seal Material | Rubber |
Function | Water Pump, engine cooling |
Weight | 1.037 kg |
Number of Wings | 7 |
Type | Water Pump, engine cooling |
Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 3.84 kg |
Placement on Vehicle | Left Front |
Additional Information | without electric motor |
Operating Mode | Manual |
Paired article numbers | 174024 |
Type | Window Regulator |
Function | Window Regulator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | transmission sided, Front Axle Left |
Weight | 2.639 kg |
External Teeth, Diff.Side | 29 |
Int. teeth, diff.side, conn.to transm. | 35 |
Type | Joint Kit, drive shaft |
Function | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Teeth, Wheel Side | 38 |
Weight | 6.858 kg |
Number of mounting bores | 6 |
Function | Drive Shaft |
Type | Drive Shaft |
Transmission-side joint diameter | 81.5 mm |
Min. Length | 510 mm |
ABS Ring Diameter | 83 mm |
Wheel Sided Joint Diameter | 98 mm |
Bore Diameter | 11 mm |
Bolt Hole Circle Diameter | 104 mm |
Thread Size | M16x1,5 |
Additional Information 2 | with screw |
Placement on Vehicle | Front Axle Right, Front Axle Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Steering arm type | Control Arm |
Placement on Vehicle | Front Axle Left, Front Axle Right, Lower, Front |
Weight | 1.95 kg |
Material | Aluminium |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with ball joint |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023