Important compatibility info
Weight | 0.260 kg |
Type | Control, swirl covers (induction pipe) |
Operating Mode | Electric-pneumatic |
Function | Control, swirl covers (induction pipe) |
Valve type | Switch Valve |
Extra Description | febi Plus |
Number of Connectors / Ports | 2 |
Fault Code(s) | P2008 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Timing Chain |
Function | Timing Chain |
Weight | 0.383 kg |
Chain Type | Simplex, Closed chain |
Number of Chain Links | 134 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Water Pump, engine cooling |
Weight | 1.33 kg |
Number of Wings | 6 |
Type | Water Pump, engine cooling |
Additional Information | with gasket/seal |
Material | Cast Aluminium |
Water pump impeller material | Metal |
Seal Material | Metal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Link/Coupling Rod, stabiliser bar |
Rod/Strut | Coupling Rod |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Type | Link/Coupling Rod, stabiliser bar |
Additional Information 2 | with screw |
Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Right |
Brake Shaft Cam | S-cam |
Screw length below head | 610 mm |
Function | Brake Shaft, drum brake |
Type | Brake Shaft, drum brake |
Paired article numbers | 174144 |
Number of Teeth | 10 |
Outer diameter | 85 mm |
Length | 655 mm |
Weight | 6.58 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Gasket, cylinder head cover |
Type | Gasket, cylinder head cover |
Weight | 0.140 kg |
Thickness | 11 mm |
Material | ACM (Polyacrylate) |
Placement on Vehicle | Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 6.422 kg |
External Teeth, Wheel Side | 36 |
Bore Diameter | 10.5 mm |
Bolt Hole Circle Diameter | 94 mm |
Thread Size | M20x1,5 |
Additional Information 2 | with nut |
Wheel Sided Joint Diameter | 97 mm |
Number of mounting bores | 6 |
Min. Length | 517 mm |
Function | Drive Shaft |
Type | Drive Shaft |
Transmission-side joint diameter | 108 mm |
Placement on Vehicle | Front Axle Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Tappet |
Weight | 0.364 kg |
Type | Tappet |
Outer diameter | 35.5 mm |
Thickness | 92 mm |
Operating Mode | Mechanical |
Placement on Vehicle | Exhaust Side, Intake Side |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.837 kg |
Outer diameter | 74 mm |
Width | 63 mm |
Type | Tensioner Pulley, V-ribbed belt |
Mounting points diameter | 10 mm |
Material | Metal |
Width of castor bearing surface | 33 mm |
Function | Tensioner Pulley, V-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Metal |
Outer diameter | 80 mm |
Operating Mode | Automatic |
Weight | 1.079 kg |
Type | Belt Tensioner, v-ribbed belt |
Function | Belt Tensioner, v-ribbed belt |
Width of castor bearing surface | 30 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.028 kg |
Number of Connectors / Ports | 2 |
Function | Expansion Tank, coolant |
Colour | Black |
Material | Plastic |
Additional Information | with coolant level sensor |
Type | Expansion Tank, coolant |
Additional Information 2 | without lid |
for OE number | 17 13 8 570 079 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Screw length below head | 610 mm |
Function | Brake Shaft, drum brake |
Type | Brake Shaft, drum brake |
Paired article numbers | 174145 |
Number of Teeth | 10 |
Length | 655 mm |
Placement on Vehicle | Left |
Weight | 6.58 kg |
Outer diameter | 85 mm |
Brake Shaft Cam | S-cam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | Requires special tools for mounting |
Weight | 0.120 kg |
Chain Type | Silent Chain, Closed chain |
Number of Chain Links | 78 |
Type | Chain, oil pump drive |
Function | Chain, oil pump drive |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Paired article numbers | 09875 |
Thread Type | with left-hand thread |
Cone Size | 30 mm |
Function | Tie Rod End |
Weight | 3.2 kg |
Length | 168 mm |
Inner diameter | 40 mm |
Placement on Vehicle | Front Axle Left, Front Axle Right |
External Thread Size | M24 x 1,5 |
Internal Thread Size | M52 x 1,5 |
Extra Description | ProKit |
Type | Tie Rod End |
Additional Information 2 | with bolts/screws |
Additional Information | with crown nut and split pin |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.070 kg |
Number of Connectors / Ports | 2 |
Function | Sensor, exhaust gas temperature |
Type | Sensor, exhaust gas temperature |
External Thread Size | M14 x 1,5 |
Cable Length | 520 mm |
Placement on Vehicle | after catalytic converter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Air Filter |
Filter type | Filter Insert |
Type | Air Filter |
Inner diameter | 190 mm |
Height | 559 mm |
Outer diameter | 282 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Front Axle Right |
Outer diameter | 137 mm |
Inner diameter | 28 mm |
Bolt Hole Circle Diameter | 114 mm |
Function | Wheel Hub |
Weight | 2.04 kg |
Type | Wheel Hub |
Additional Information 2 | without wheel bearing, with wheel studs |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | with crown nut |
Driver Position | for right-hand drive vehicles |
Placement on Vehicle | Front Axle |
Function | Idler Arm |
Weight | 1.4 kg |
Type | Idler Arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, outer |
Length | 325 mm |
Diameter | 1 mm |
Material | Steel |
Thickness | 360 mm |
Spanner Size | 18 |
Paired article numbers | 183957 |
Rod/Strut | Coupling Rod |
Thread Length | 22 mm |
Weight | 0.805 kg |
Type | Link/Coupling Rod, stabiliser bar |
Function | Link/Coupling Rod, stabiliser bar |
External Thread Size | M12 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter 1 | 55 mm |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Width | 42 mm |
Outer diameter | 78 mm |
Weight | 2.720 kg |
Inner diameter | 28 mm |
Bearing Type | Angular Ball Bearing |
Type | Wheel Bearing Kit |
Function | Wheel Bearing Kit |
Additional Information 2 | Wheel Bearing integrated into wheel hub |
Outer diameter 2 | 125 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023