Important compatibility info
Placement on Vehicle | Front Axle |
Length | 300 mm |
Cone Size | 28.6 mm |
Thickness | 100 mm |
Outer diameter | 36 mm |
Weight | 3.4 kg |
External Thread Size | M20 x 1,5 |
Function | Tie Rod |
Extra Description | ProKit |
Type | Tie Rod |
Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle |
Length | 720 mm |
Rod/Strut | Guide Rod |
Cone Size | 30 mm |
Pipe Diameter | 36 mm |
Function | Centre Rod Assembly |
Weight | 7.0 kg |
Driver Position | for left-hand/right-hand drive vehicles |
Extra Description | ProKit |
Internal Thread Size | M30 x 1,5 RHT |
External Thread Size | M24 x 1,5 |
Type | Centre Rod Assembly |
Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | with crown nut |
Rod/Strut | Coupling Rod |
Length | 350 mm |
Placement on Vehicle | Front Axle |
Extra Description | ProKit |
Function | Link/Coupling Rod, stabiliser bar |
Type | Link/Coupling Rod, stabiliser bar |
Weight | 3.1 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Housing length | 354 mm |
Housing Diameter | 20 mm |
Weight | 0.3 kg |
Piston conrod diameter | 8 mm |
Type | Gas Spring, boot/cargo area |
Function | Gas Spring, boot/cargo area |
Length | 646 mm |
Placement on Vehicle | both sides |
Eject Force | 300 N |
Stroke | 258 mm |
Mounting points diameter | 17.8 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Width of castor bearing surface | 32 mm |
Weight | 0.728 kg |
Material | Metal |
Outer diameter | 80 mm |
Number of Ribs | 8 |
Function | Deflection/Guide Pulley, v-ribbed belt |
Type | Deflection/Guide Pulley, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.560 kg |
Function | Coiled Cable |
Working length | 4.0 m |
Number of Connectors / Ports | 7 |
DIN / ISO | 7638 |
Material | PU (Polyurethane) |
Voltage | 24 V |
Type | Coiled Cable |
Temperature range to | 85 °C |
Temperature range from | -40 °C |
Additional Information 2 | with plug |
Version | Aftermarket |
Connecting plug material | Plastic |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Fill Medium | Brake Fluid |
Function | Master Cylinder, clutch |
Type | Master Cylinder, clutch |
Weight | 0.324 kg |
Bore Diameter | 9 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Left |
Length | 173 mm |
Voltage | 24 V |
Paired article numbers | 193009 |
Port / Connector type | PRS |
Number of Connectors / Ports | 2 |
Weight | 0.228 kg |
Mounting bores distance | 78.4 mm |
Light Design | LED |
Cable Length | 1250 mm |
Manufacturer Release | ADR Zone 2 |
Protection Type (IP Code) | IP69K |
Type | End Outline Marker Light |
Fulfils ECE norm | R7, R10, R91 |
Function | End Outline Marker Light |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.864 kg |
Function | Mounting, engine |
Bearing/Mounting Type | Rubber-Metal Mount |
for OE number | 50521924 |
Placement on Vehicle | Rear |
Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Inner diameter | 12 mm |
Mounting points diameter | 12 mm |
Width | 73 mm |
Weight | 0.903 kg |
Material | Metal |
Outer diameter | 73 mm |
Width of castor bearing surface | 42 mm |
Function | Deflection/Guide Pulley, v-ribbed belt |
Type | Deflection/Guide Pulley, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Left Front |
Operating Mode | Electric |
Paired article numbers | 170214 |
Function | Window Regulator |
Weight | 1.0 kg |
Type | Window Regulator |
Additional Information | without electric motor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Steering arm type | Control Arm |
Weight | 3.34 kg |
Paired article numbers | 175410 |
External Thread Size | M14 x 1,5 |
Material | Aluminium |
Placement on Vehicle | Lower, Front Axle Right |
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Extra Description | ProKit |
Additional Information 2 | with bearing, with ball joint, with screw |
Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (174666)
- 1x Febi Ball Joint (36884)
- 2x Febi Nut, ball joint (23696)
- 1x Febi Bolt, wheel alignment (40196)
- 2x Febi Washer (07755)
- 1x Febi Nut (21557)
Important compatibility info
Weight | 1.46 kg |
Material | Cast Aluminium |
Number of Teeth | 6 |
Number of Wings | 7 |
Function | Water Pump, engine cooling |
Water pump impeller material | Metal |
Seal Material | Rubber/Metal |
Additional Information | with gasket/seal |
Type | Water Pump, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 4.92 kg |
Additional Information | with fastening/mounting material |
Placement on Vehicle | Front Axle Right, Lower |
Material | Sheet Steel |
Steering arm type | Control Arm |
Paired article numbers | 40625 |
Cone Size | 21 mm |
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Extra Description | ProKit |
Additional Information 2 | with ball joint, with rubber mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (31846)
- 1x Febi Fastening Bolt, control arm (40518)
- 2x Febi Fastening Bolt, control arm (32417)
Important compatibility info
Material | Aluminium |
Weight | 0.455 kg |
Type | Oil Cooler, engine oil |
Function | Oil Cooler, engine oil |
Core Length | 80 mm |
Core Width | 80 mm |
Core Depth | 42 mm |
Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Ribs | 9 |
Function | V-Ribbed Belt |
Length | 4145 mm |
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Weight | 0.634 kg |
Replaces | 19034 |
Type | V-Ribbed Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Front Axle Right, Lower |
Material | Aluminium |
Steering arm type | Control Arm |
Function | Control/Trailing Arm, wheel suspension |
Weight | 2.16 kg |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with bearing, with ball joint |
Additional Information | with fastening/mounting material, with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (32321)
- 1x Febi Screw (21476)
- 1x Febi Nut (40396)
- 1x Febi Nut (14392)
Important compatibility info
Weight | 0.178 kg |
Type | Control Valve, camshaft adjustment |
Placement on Vehicle | Exhaust Side |
Function | Control Valve, camshaft adjustment |
Extra Description | febi Plus |
Paired article numbers | 175331 |
Additional Information 2 | with screw |
Number of Connectors / Ports | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Deflection/Guide Pulley, v-ribbed belt |
Weight | 0.315 kg |
Outer diameter | 70 mm |
Material | Metal |
Type | Deflection/Guide Pulley, v-ribbed belt |
Width of castor bearing surface | 29 mm |
Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 145 mm |
Number of Holes | 5 |
Placement on Vehicle | Rear Axle |
Weight | 1.8 kg |
Number of Teeth | 30 |
Function | Wheel Hub |
Type | Wheel Hub |
Additional Information 2 | without wheel bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023