Proud to be a UK-based company
Contact us
Important compatibility info
| Type | Drive Shaft |
| Weight | 5.780 kg |
| External Teeth, Wheel Side | 36 |
| Bolt Hole Circle Diameter | 86 mm |
| Wheel Sided Joint Diameter | 89 mm |
| Transmission-side joint diameter | 100 mm |
| Function | Drive Shaft |
| Additional Information 2 | with nut |
| Thread Size | M20x1,5 |
| Number of mounting bores | 6 |
| Min. Length | 558 mm |
| Placement on Vehicle | Front Axle Left |
| Additional Information | with grease |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.22
Important compatibility info
| Weight | 2.320 kg |
| Function | Gasket Set, wheel hub |
| Placement on Vehicle | Rear Axle |
| Type | Gasket Set, wheel hub |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Shaft Seal, drive shaft (38541)
- 1x Febi Shaft Seal, wheel hub (24758)
- 1x Febi Ring, wheel hub (04455)
- 1x Febi Thrust Washer, external planetary gearbox (21951)
- 1x Febi Seal Ring, wheel hub (08008)
- 1x Febi Gasket, external planetary gearbox (08009)
- 1x Febi Gasket, external planetary gearbox (08010)
- 1x Febi Gasket, external planetary gearbox (08011)
- 1x Febi Toothed Disc, external planetary gearbox (08488)
- 1x Febi Sensor Ring, ABS (18612)
£56.22
Important compatibility info
| Placement on Vehicle | Front |
| Operating Mode | Pneumatic |
| Weight | 1.3 kg |
| Shock Absorber Mounting Type | Top pin, Bottom Pin |
| Max. Length | 352 mm |
| Min. Length | 253 mm |
| Piston Diameter | 12 mm |
| Pipe Diameter | 45 mm. 62 mm |
| Type | Shock Absorber, driver cab suspension |
| Function | Shock Absorber, driver cab suspension |
| External Thread Size | M12 x 1,75 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.22
Important compatibility info
| Weight | 1.65 kg |
| Function | Shock Absorber |
| Piston conrod diameter | 12.5 mm |
| Mounting points diameter | 16 mm |
| Pipe Diameter | 53 mm. 45 mm |
| Min. Length | 286 mm |
| Max. Length | 427 mm |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Shock Absorber Type | Oil Pressure |
| Placement on Vehicle | Front Axle |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.22
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Additional Information 2 | with nut |
| Min. Length | 800 mm |
| Thread Size | M20x1,5 |
| External Teeth, Wheel Side | 21 |
| External Teeth, Diff.Side | 22 |
| Function | Drive Shaft |
| Wheel Sided Joint Diameter | 84 mm |
| Transmission-side joint diameter | 67.6 mm |
| Weight | 6.242 kg |
| Type | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.22
Important compatibility info
| Placement on Vehicle | Right |
| Weight | 0.496 kg |
| Function | Cable Pull, manual transmission |
| Outer length 1 | 1262 mm |
| Inner length 1 | 893 mm |
| Type | Cable Pull, manual transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.22
Important compatibility info
| Type | Joint Kit, drive shaft |
| Function | Joint Kit, drive shaft |
| Placement on Vehicle | transmission sided, Front Axle Left, Front Axle Right |
| External Teeth, Diff.Side | 34 |
| Weight | 1.946 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.22
Important compatibility info
| Function | Mounting, engine |
| Placement on Vehicle | Left |
| Paired article numbers | 26802 |
| Bearing/Mounting Type | Hydro Mount |
| Weight | 0.718 kg |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.23
Important compatibility info
| Placement on Vehicle | Rear Axle Right, Rear Axle Left |
| Bore Diameter | 16 mm |
| Shock Absorber Type | Gas Pressure |
| Shock Absorber System | Twin-Tube |
| Shock Absorber Design | Telescopic Shock Absorber |
| Weight | 1.700 kg |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Mounting bores distance | 439 mm |
| Max. Length | 439 mm |
| Min. Length | 286 mm |
| Pipe Diameter | 60 mm. 51 mm |
| Type | Shock Absorber |
| Function | Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.24
Important compatibility info
| Type | Wheel Bearing Kit |
| Function | Wheel Bearing Kit |
| Outer diameter | 86 mm |
| Width | 37 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Inner diameter | 50 mm |
| Bearing Type | Tapered Roller Bearing |
| Additional Information 2 | Wheel Bearing integrated into wheel hub |
| Weight | 4.460 kg |
| Outer diameter 1 | 67 mm |
| Outer diameter 2 | 169 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.25
Important compatibility info
| Seal Material | Paper |
| Weight | 1.26 kg |
| Housing Type | with housing |
| Function | Water Pump, engine cooling |
| Additional Information | with seal rings |
| Water pump impeller material | Metal |
| Number of Wings | 7 |
| Housing material | Metal |
| Type | Water Pump, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.25
Important compatibility info
| Placement on Vehicle | Front Axle |
| Outer diameter | 283 mm |
| Thickness | 46 mm |
| Brake Disc Thickness | 22 mm |
| Minimum thickness | 19 mm |
| Bolt Hole Circle Diameter | 114.3 mm |
| Centering Diameter | 62 mm |
| Surface | Coated |
| Weight | 6.0 kg |
| Rim Hole Number | 5 -Hole |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
| Rotor Style | Vented |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.26
Important compatibility info
| Number of Connectors / Ports | 2 |
| Function | Control Valve, camshaft adjustment |
| Weight | 0.160 kg |
| Extra Description | febi Plus |
| Type | Control Valve, camshaft adjustment |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.26
Important compatibility info
| Weight | 0.3 kg |
| Function | Tensioner, timing belt |
| Type | Tensioner, timing belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.26
Important compatibility info
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 122 |
| Weight | 0.720 kg |
| Timing Chain Size | G68HR |
| Function | Timing Chain |
| Additional Information 2 | Requires special tools for mounting |
| Type | Timing Chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.29
Important compatibility info
| Rim Hole Number | 5 -Hole |
| Rotor Style | Internally Vented |
| Weight | 8.33 kg |
| Placement on Vehicle | Front Axle |
| Outer diameter | 308 mm |
| Thickness | 42 mm |
| Brake Disc Thickness | 25 mm |
| Minimum thickness | 22 mm |
| Bolt Hole Circle Diameter | 110 mm |
| Centering Diameter | 70 mm |
| Surface | Coated |
| Number of mounting bores | 3 |
| Function | Brake Disc |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.29
Important compatibility info
| Weight | 1.96 kg |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Placement on Vehicle | Right |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.31
Important compatibility info
| Material | Rubber/Metal |
| Weight | 0.519 kg |
| Type | Rubber Buffer, suspension |
| Function | Rubber Buffer, suspension |
| Placement on Vehicle | Rear Axle |
| Length | 124 mm |
| Width | 78 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.32
Important compatibility info
| Function | Brake Disc |
| Minimum thickness | 24.5 mm |
| Bolt Hole Circle Diameter | 110 mm |
| Surface | Coated |
| Rim Hole Number | 6 -Hole |
| Outer diameter | 290 mm |
| Thickness | 53 mm |
| Brake Disc Thickness | 26 mm |
| Weight | 7.4 kg |
| Placement on Vehicle | Front Axle |
| Type | Brake Disc Rotor |
| Rotor Style | Internally Vented |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.32
Important compatibility info
| Weight | 0.140 kg |
| Type | Slave Cylinder, clutch |
| Function | Slave Cylinder, clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.32
Important compatibility info
| Number of Connectors / Ports | 3 |
| Function | Sensor, crankshaft pulse |
| Additional Information 2 | with seal ring |
| Weight | 0.036 kg |
| Type | Sensor, crankshaft pulse |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.32
Important compatibility info
| Bolt Hole Circle Diameter | 177 mm |
| Surface | Coated |
| Function | Brake Disc |
| Brake Disc Type | Internally Vented |
| Minimum thickness | 28 mm |
| Weight | 15.83 kg |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 335 mm |
| Thickness | 111 mm |
| Brake Disc Thickness | 34 mm |
| Rim Hole Number | 8 -Hole |
| Internal Thread Size | M12 x 1,5 |
| Type | Brake Disc |
| for OE number | 970 423 12 12 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.33
Important compatibility info
| Weight | 0.257 kg |
| Placement on Vehicle | transmission sided |
| Material | ACM (Polyacrylate), PTFE (polytetrafluoroethylene) |
| Outer diameter | 191 mm |
| Thickness | 16 mm |
| Inner diameter | 165 mm |
| Function | Shaft Seal, crankshaft |
| Type | Shaft Seal, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.34
Important compatibility info
| Weight | 3.360 kg |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right, Lower |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Function | Control/Trailing Arm, wheel suspension |
| Extra Description | ProKit |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (47013)
- 1x Febi Camber Correction Screw (37216)
£56.34
Important compatibility info
| Length | 59 mm |
| Spanner Size | 27 |
| Number of Connectors / Ports | 3 |
| Function | Sensor, oil pressure |
| Screw length below head | 12 mm |
| Weight | 0.112 kg |
| External Thread Size | M18 x 1,5 |
| Colour | Black |
| Type | Sensor, oil pressure |
| for OE number | 51.27421.0262 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.34
Important compatibility info
| Function | Brake Master Cylinder |
| Weight | 1.135 kg |
| Type | Brake Master Cylinder |
| Material | Cast Iron |
| Piston Diameter | 20.6 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.35
Important compatibility info
| Spanner Size | 22 |
| Weight | 0.104 kg |
| Cable Length | 803 mm |
| Number of circuits | 4 |
| Lambda Sensor | Heated |
| Type | Oxygen Sensor |
| Function | Oxygen Sensor |
| External Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.35
Important compatibility info
| Type | Mounting, engine |
| Function | Mounting, engine |
| Placement on Vehicle | Left |
| Weight | 1.500 kg |
| Bearing/Mounting Type | Rubber-Metal Mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.36
Important compatibility info
| Material | Cast Aluminium |
| Number of Wings | 4 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Plastic |
| Seal Material | Paper |
| Weight | 1.641 kg |
| Additional Information | with gasket/seal |
| Type | Water Pump, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.36
Important compatibility info
| Rotor Style | Internally Vented |
| Weight | 7.699 kg |
| Placement on Vehicle | Front Axle |
| Outer diameter | 302 mm |
| Thickness | 38.8 mm |
| Brake Disc Thickness | 28 mm |
| Minimum thickness | 26.5 mm |
| Bolt Hole Circle Diameter | 114.3 mm |
| Centering Diameter | 73 mm |
| Surface | Coated |
| Function | Brake Disc |
| Rim Hole Number | 5 -Hole |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.36
Important compatibility info
| Material | Cast Iron |
| Function | Brake Caliper |
| Type | Brake Caliper |
| Brake caliper piston diameter | 34 mm |
| Placement on Vehicle | Rear Axle Left |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 182250 |
| Weight | 1.45 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.38
Important compatibility info
| Brake caliper piston diameter | 34 mm |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 182249 |
| Weight | 1.45 kg |
| Function | Brake Caliper |
| Type | Brake Caliper |
| Material | Cast Iron |
| Placement on Vehicle | Rear Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.38
Important compatibility info
| Weight | 1.117 kg |
| Additional Information 2 | with bolts/screws, with washers |
| Extra Description | ProKit |
| Outer diameter | 140 mm |
| Thickness | 32 mm |
| Bolt Hole Circle Diameter | 90 mm |
| Type | Joint, propshaft |
| Function | Joint, propshaft |
| Additional Information | with nuts |
| Number of Holes | 6 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Joint, propshaft (101355)
- 3x Febi Screw (109455)
- 3x Febi Screw (109454)
- 6x Febi Nut (19104)
- 3x Febi Washer (19107)
£56.39
Important compatibility info
| Weight | 0.017 kg |
| Number of Connectors / Ports | 3 |
| Function | Sensor, intake manifold pressure |
| Type | Sensor, intake manifold pressure |
| for OE number | 89421-26030 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.39
Important compatibility info
| Replaces | 22043 |
| Placement on Vehicle | Rear Axle, Front |
| Function | Bush Set, axle beam |
| Weight | 1.32 kg |
| Type | Bush Set, axle beam |
| Additional Information 2 | with bolts/screws |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Bushing, axle beam (22039)
- 2x Febi Bushing, axle cross member (06668)
- 2x Febi Repair Kit, axle beam (22045)
£56.40
Important compatibility info
| Outer diameter | 100 mm |
| Weight | 0.52 kg |
| Function | Piston, air compressor |
| Type | Piston, air compressor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.41
Important compatibility info
| Type | Expansion Tank, coolant |
| Additional Information 2 | with lid |
| Number of Connectors / Ports | 2 |
| Weight | 0.74 kg |
| Additional Information | with coolant level sensor |
| Function | Expansion Tank, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.41
Important compatibility info
| Outer diameter | 156 mm |
| Thickness | 44 mm |
| Inner diameter | 30 mm |
| Number of Ribs | 5 |
| Parameter | 6PK |
| Function | Belt Pulley, crankshaft |
| Weight | 2.290 kg |
| Type | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.42
Important compatibility info
| Weight | 0.535 kg |
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 106 |
| Type | Chain, oil pump drive |
| Function | Chain, oil pump drive |
| Additional Information 2 | Requires special tools for mounting |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.43
Important compatibility info
| Weight | 2.99 kg |
| Placement on Vehicle | Front, both sides |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
| Internal Thread Size | M16 x 1,5 |
| Hole Spacing | 155.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.43
Important compatibility info
| Function | Joint, propshaft |
| Placement on Vehicle | Rear |
| Outer diameter | 115 mm |
| Weight | 0.4 kg |
| Thickness | 24 mm |
| Type | Joint, propshaft |
| Length | 115 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.43
Important compatibility info
| Weight | 1.380 kg |
| Placement on Vehicle | Right |
| Material | Rubber/Metal |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.44
Important compatibility info
| Weight | 2.99 kg |
| Outer diameter 1 | 79 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Width | 51 mm |
| Outer diameter | 90 mm |
| Number of Holes | 5 |
| Bolt Hole Circle Diameter | 120 mm |
| Bearing Type | Angular Ball Bearing |
| Function | Wheel Bearing Kit |
| Type | Wheel Bearing Kit |
| Additional Information 2 | Wheel Bearing integrated into wheel hub |
| Outer diameter 2 | 147 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.44
Important compatibility info
| Bearing/Mounting Type | Hydro Mount |
| Placement on Vehicle | Upper Right |
| Function | Mounting, engine |
| Type | Mounting, engine |
| Weight | 2.15 kg |
| for OE number | 1807.HF |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.44
Important compatibility info
| Replaces | 108456 |
| Rotor Style | Internally Vented |
| Placement on Vehicle | Front Axle |
| Outer diameter | 294 mm |
| Thickness | 45.5 mm |
| Brake Disc Thickness | 26 mm |
| Minimum thickness | 24.4 mm |
| Bolt Hole Circle Diameter | 114.3 mm |
| Centering Diameter | 69 mm |
| Surface | Coated |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
| Rim Hole Number | 5 -Hole |
| Weight | 7.320 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.44
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Additional Information | with rubber mounts |
| Material | Sheet Steel |
| Additional Information 2 | with ball joint |
| Steering arm type | Control Arm |
| Paired article numbers | 184751 |
| Weight | 2.567 kg |
| Cone Size | 20 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.45
Important compatibility info
| Type | Mounting, control/trailing arm |
| Placement on Vehicle | Front Axle Right, Lower, Rear |
| Length | 194 mm |
| Function | Mounting, control/trailing arm |
| Inner diameter 2 | 30 mm |
| Inner diameter 1 | 26 mm |
| Paired article numbers | 174316 |
| Thickness | 69 mm |
| Weight | 0.720 kg |
| Width | 86 mm |
| Material | Rubber/Metal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.45
Important compatibility info
| Function | Mounting, engine |
| Bearing/Mounting Type | Hydro Mount |
| Placement on Vehicle | Left Front |
| Weight | 0.838 kg |
| Type | Mounting, engine |
| for OE number | 56 82 504 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.46
Important compatibility info
| Weight | 6.62 kg |
| Placement on Vehicle | Front Axle |
| Outer diameter | 280 mm |
| Thickness | 51.2 mm |
| Brake Disc Thickness | 25 mm |
| Minimum thickness | 22.4 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Centering Diameter | 67 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Function | Brake Disc |
| Rotor Style | Internally Vented |
| Type | Brake Disc Rotor |
| Rim Hole Number | 5 -Hole |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.47
Important compatibility info
| Bearing/Mounting Type | Hydro Mount |
| Type | Mounting, engine |
| Paired article numbers | 32698 |
| Placement on Vehicle | Right |
| Function | Mounting, engine |
| Weight | 2.208 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.48
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023