Proud to be a UK-based company
Contact us
Important compatibility info
| Weight | 0.911 kg |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Width | 37 mm |
| Outer diameter | 82 mm |
| Inner diameter | 42 mm |
| Bearing Type | Angular Ball Bearing |
| Type | Wheel Bearing Kit |
| Function | Wheel Bearing Kit |
| Additional Information 2 | with screw |
| Additional Information | with axle nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Wheel Bearing (03972)
- 1x Febi Clamping Bolt, ball joint (03973)
- 1x Febi Nut (05360)
- 1x Febi Nut, kingpin (19159)
£56.04
Important compatibility info
| Weight | 0.046 kg |
| Cable Length | 200 mm |
| Type | Sensor, exhaust gas temperature |
| Function | Sensor, exhaust gas temperature |
| Placement on Vehicle | before soot particulate filter |
| Number of Connectors / Ports | 2 |
| External Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.06
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Upper |
| Additional Information | with rubber-metal mounts |
| Material | Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 195000 |
| Weight | 4.012 kg |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.06
Important compatibility info
| Function | Sensor, camshaft position |
| Type | Sensor, camshaft position |
| Weight | 0.018 kg |
| Number of Connectors / Ports | 3 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.06
Important compatibility info
| Weight | 0.015 kg |
| Number of Connectors / Ports | 3 |
| Function | Sensor, crankshaft pulse |
| Type | Sensor, crankshaft pulse |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.06
Important compatibility info
| Rim Hole Number | 5 -Hole |
| Rotor Style | Internally Vented |
| Weight | 8.55 kg |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 294 mm |
| Thickness | 44.4 mm |
| Brake Disc Thickness | 22 mm |
| Minimum thickness | 19.5 mm |
| Bolt Hole Circle Diameter | 120 mm |
| Centering Diameter | 76 mm |
| Surface | Coated |
| Number of mounting bores | 5 |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.08
Important compatibility info
| Weight | 0.03 kg |
| Number of Connectors / Ports | 3 |
| Function | Sensor, intake manifold pressure |
| Type | Sensor, intake manifold pressure |
| Additional Information 2 | with seal ring |
| for OE number | 13 62 2 246 977 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.08
Important compatibility info
| for OE number | 11 75 072 71R |
| Weight | 0.72 kg |
| Outer diameter | 65 mm |
| Operating Mode | Automatic |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Metal |
| Type | Belt Tensioner, v-ribbed belt |
| Width of castor bearing surface | 30 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.08
Important compatibility info
| Bearing Type | Angular Ball Bearing |
| Additional Information 2 | Wheel Bearing integrated into wheel hub |
| Width | 72 mm |
| Outer diameter | 78 mm |
| Type | Wheel Bearing Kit |
| Inner diameter | 37 mm |
| Function | Wheel Bearing Kit |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Weight | 3.220 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Wheel Bearing Kit (173758)
£56.09
Important compatibility info
| Outer diameter | 65 mm |
| Type | Belt Tensioner, v-ribbed belt |
| Material | Plastic |
| Weight | 0.574 kg |
| Function | Belt Tensioner, v-ribbed belt |
| Width of castor bearing surface | 25 mm |
| Operating Mode | Automatic |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.09
Important compatibility info
| Weight | 0.144 kg |
| Type | Sensor, headlight levelling |
| Function | Sensor, headlight levelling |
| Placement on Vehicle | Left Front |
| Number of Connectors / Ports | 4 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.09
Important compatibility info
| Weight | 0.238 kg |
| Placement on Vehicle | Upper |
| Surface | Coated |
| Chain Type | Simplex, with chain lock |
| Number of Chain Links | 86 |
| Timing Chain Size | G53HS-7, G53HS-8 |
| Function | Timing Chain |
| Type | Timing Chain |
| Additional Information 2 | Requires special tools for mounting |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.09
Important compatibility info
| Additional Information | with lock nut, with holder, with rubber mounts |
| Placement on Vehicle | Front Axle Right, Lower |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 38181 |
| Function | Control/Trailing Arm, wheel suspension |
| Weight | 4.304 kg |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (36896)
- 1x Febi Mounting, control/trailing arm (27071)
- 3x Febi Nut, ball joint (36734)
£56.09
Important compatibility info
| Weight | 0.52 kg |
| Number of Chain Links | 130 |
| Chain Type | Silent Chain, Closed chain |
| Function | Timing Chain |
| Additional Information 2 | Requires special tools for mounting |
| Type | Timing Chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.09
Important compatibility info
| Number of Connectors / Ports | 2 |
| Weight | 0.062 kg |
| Cable Length | 620 mm |
| Type | Sensor, exhaust gas temperature |
| Function | Sensor, exhaust gas temperature |
| External Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.11
Important compatibility info
| Function | Brake Caliper |
| Type | Brake Caliper |
| Placement on Vehicle | Rear Axle Left |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 178189 |
| Weight | 2.43 kg |
| Brake caliper piston diameter | 38 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.11
Important compatibility info
| Placement on Vehicle | Front Axle Left, Rear |
| Material | Aluminium |
| Inner diameter | 12 mm |
| Steering arm type | Control Arm |
| Paired article numbers | 45094 |
| Function | Control/Trailing Arm, wheel suspension |
| Weight | 0.98 kg |
| External Thread Size | M14 x 1,5 |
| Extra Description | ProKit |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with rubber mount, with ball joint |
| Cone Size | 16 mm |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.12
Important compatibility info
| Type | Brake Caliper |
| Placement on Vehicle | Rear Axle Right |
| Material | Cast Aluminium |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 178458 |
| Weight | 1.45 kg |
| Function | Brake Caliper |
| Brake caliper piston diameter | 38 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.13
Important compatibility info
| Type | Brake Caliper |
| Placement on Vehicle | Rear Axle Left |
| Material | Cast Aluminium |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 178459 |
| Weight | 1.45 kg |
| Function | Brake Caliper |
| Brake caliper piston diameter | 38 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.13
Important compatibility info
| Weight | 0.55 kg |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Metal |
| Material | Cast Aluminium |
| Additional Information 2 | with bolts/screws |
| Number of Teeth | 29 |
| Number of Wings | 5 |
| Type | Water Pump, engine cooling |
| Additional Information | with gasket/seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.14
Important compatibility info
| Rim Hole Number | 6 -Hole |
| Rotor Style | Internally Vented |
| Weight | 6.8 kg |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 312 mm |
| Thickness | 68 mm |
| Brake Disc Thickness | 18 mm |
| Minimum thickness | 16 mm |
| Bolt Hole Circle Diameter | 139.7 mm |
| Centering Diameter | 108 mm |
| Surface | Coated |
| Number of mounting bores | 2 |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.14
Important compatibility info
| Weight | 6.32 kg |
| Rotor Style | Solid |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 328 mm |
| Thickness | 33.2 mm |
| Brake Disc Thickness | 12 mm |
| Minimum thickness | 10.4 mm |
| Bolt Hole Circle Diameter | 127 mm |
| Centering Diameter | 72.5 mm |
| Surface | Coated |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
| Rim Hole Number | 5 -Hole |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.15
Important compatibility info
| Placement on Vehicle | Rear |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Weight | 0.4 kg |
| Function | Mounting, engine |
| Type | Mounting, engine |
| for OE number | 2 139 829 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.17
Important compatibility info
| Width of castor bearing surface | 23 mm |
| Weight | 0.658 kg |
| Outer diameter | 65 mm |
| Operating Mode | Automatic |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Plastic |
| Type | Belt Tensioner, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.18
Important compatibility info
| Function | Oil Pump |
| Weight | 0.57 kg |
| Type | Oil Pump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.18
Important compatibility info
| Weight | 1.66 kg |
| Width | 35 mm |
| Outer diameter | 143 mm |
| Inner diameter | 30 mm |
| Number of Ribs | 5 |
| Parameter | 6PK |
| Function | Belt Pulley, crankshaft |
| Type | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.18
Important compatibility info
| Seal Material | Rubber/Metal |
| Function | Water Pump, engine cooling |
| Weight | 0.614 kg |
| Number of Wings | 8 |
| Water pump impeller material | Plastic |
| Additional Information | with gasket/seal |
| Material | Cast Aluminium |
| Type | Water Pump, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.18
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Additional Information 2 | with nut |
| Thread Size | M20x1,5 |
| External Teeth, Wheel Side | 21 |
| Weight | 5.602 kg |
| External Teeth, Diff.Side | 22 |
| Min. Length | 807 mm |
| Wheel Sided Joint Diameter | 76.4 mm |
| Transmission-side joint diameter | 72.2 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.18
Important compatibility info
| Weight | 0.176 kg |
| Operating Mode | Hydraulic |
| Function | Tensioner, timing chain |
| Type | Tensioner, timing chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.18
Important compatibility info
| Weight | 0.049 kg |
| Placement on Vehicle | Left Exterior Mirror |
| Length | 58 mm |
| Height | 64 mm |
| Width | 90 mm |
| Paired article numbers | 107878 |
| Type | Auxiliary Direction Indicator |
| Function | Auxiliary Direction Indicator |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.18
Important compatibility info
| Additional Information 2 | with quick couplers |
| Placement on Vehicle | Upper Left |
| Cooling Hose | from distributor to engine cooler |
| Weight | 0.485 kg |
| Function | Radiator Hose |
| Type | Radiator Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.18
Important compatibility info
| External Teeth, Diff.Side | 23 |
| Min. Length | 645 mm |
| Additional Information 2 | with nut |
| Weight | 4.312 kg |
| Paired article numbers | 184613 |
| Placement on Vehicle | Front Axle Left |
| Wheel Sided Joint Diameter | 70 mm |
| Function | Drive Shaft |
| Type | Drive Shaft |
| Transmission-side joint diameter | 67.5 mm |
| External Teeth, Wheel Side | 24 |
| Thread Size | M22x1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.18
Important compatibility info
| Operating Mode | Electric |
| Number of Connectors / Ports | 8 |
| Lock System | with double sealing |
| Placement on Vehicle | Right Front |
| Additional Information | with adjuster |
| Paired article numbers | 177623 |
| Weight | 0.599 kg |
| Type | Door Lock |
| Function | Door Lock |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.18
Important compatibility info
| Inner diameter | 32 mm |
| Function | Tensioner, timing belt |
| Operating Mode | Hydraulic |
| Type | Tensioner, timing belt |
| Weight | 0.280 kg |
| Material | Aluminium |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.18
Important compatibility info
| Width | 30 mm |
| Material | Plastic |
| Outer diameter | 90 mm |
| Function | Deflection/Guide Pulley, v-ribbed belt |
| Width of castor bearing surface | 25 mm |
| Type | Deflection/Guide Pulley, v-ribbed belt |
| Weight | 0.180 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.18
Important compatibility info
| Inner diameter | 58 mm |
| Function | Charge Air Hose |
| Placement on Vehicle | Upper, Left |
| Turbocharger line | Charge air cooler to intake manifold |
| Weight | 0.582 kg |
| Width | 260 mm |
| Outer diameter 2 | 69 mm |
| Type | Charge Air Hose |
| Outer diameter 1 | 65 mm |
| Additional Information 2 | with quick couplers |
| Hose Length | 270 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.18
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Outer diameter | 308 mm |
| Thickness | 65 mm |
| Brake Disc Thickness | 20 mm |
| Minimum thickness | 18 mm |
| Bolt Hole Circle Diameter | 108 mm |
| Centering Diameter | 68 mm |
| Surface | Coated |
| Number of mounting bores | 5 |
| Function | Brake Disc |
| Weight | 7.3 kg |
| Rotor Style | Internally Vented |
| Rim Hole Number | 5 -Hole |
| Type | Brake Disc Rotor |
| Hole Spacing | 63 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.18
Important compatibility info
| Weight | 0.07 kg |
| Function | Sensor, exhaust gas temperature |
| Placement on Vehicle | after soot particulate filter |
| Number of Connectors / Ports | 2 |
| Type | Sensor, exhaust gas temperature |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.18
Important compatibility info
| Function | Timing Chain |
| Number of Chain Links | 130 |
| Timing Chain Size | D67ZN |
| Chain Type | Duplex, with chain lock |
| Weight | 0.96 kg |
| Type | Timing Chain |
| Additional Information 2 | Requires special tools for mounting |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.18
Important compatibility info
| Type | Water Pump & Timing Belt Kit |
| Function | Water Pump & Timing Belt Kit |
| Weight | 0.993 kg |
| Surface | Coated |
| Number of Teeth | 109 |
| Width | 25 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt Kit (32396)
- 1x Febi Water Pump, engine cooling (26306)
£56.18
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 125.5 mm |
| Width | 92.3 mm. 109.5 mm |
| Additional Information 2 | with anti-squeak plate |
| Wear Warning Contact | prepared for wear warning indicator |
| Inspection Tag | ECE R90 Approved |
| Weight | 3.203 kg |
| Thickness/Strength 1 | 18.1 mm. 18.4 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.20
Important compatibility info
| Steering arm type | Control Arm |
| Paired article numbers | 34233 |
| Placement on Vehicle | Front Axle Left, Lower |
| Weight | 3.502 kg |
| Material | Sheet Steel |
| Function | Control/Trailing Arm, wheel suspension |
| Extra Description | ProKit |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint, with rubber mount |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (27073)
- 1x Febi Mounting and Bolting Kit, control/trailing arm (34238)
£56.21
Important compatibility info
| Weight | 6.6 kg |
| Rotor Style | Internally Vented |
| Rim Hole Number | 5 -Hole |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 300 mm |
| Thickness | 66 mm |
| Brake Disc Thickness | 20 mm |
| Minimum thickness | 18.4 mm |
| Bolt Hole Circle Diameter | 120 mm |
| Centering Diameter | 75 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Function | Brake Disc |
| Type | Brake Disc Rotor |
| for OE number | 34 21 6 864 901 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.21
Important compatibility info
| Housing length | 180.5 mm |
| Weight | 0.585 kg |
| Housing Diameter | 36 mm |
| Eject Force | 1190 N |
| Stroke | 88 mm |
| Mounting points diameter | 8 mm |
| Piston conrod diameter | 8 mm |
| Function | Gas Spring, boot/cargo area |
| Length | 308 mm |
| Paired article numbers | 36747 |
| Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.22
Important compatibility info
| Bore Diameter | 10.6 mm |
| Number of mounting bores | 6 |
| Weight | 6.204 kg |
| External Teeth, Wheel Side | 36 |
| Function | Drive Shaft |
| Type | Drive Shaft |
| Transmission-side joint diameter | 75.6 mm |
| Wheel Sided Joint Diameter | 59.5 mm |
| Min. Length | 488 mm |
| Placement on Vehicle | Front Axle Left |
| Thread Size | M16x1,5 |
| Bolt Hole Circle Diameter | 94.06 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.22
Important compatibility info
| Type | Control/Trailing Arm, wheel suspension |
| External Thread Size | M14 x 1,5 |
| Cone Size 2 | 18 mm |
| Cone Size | 15 mm |
| Weight | 2.786 kg |
| Placement on Vehicle | Front Axle Right, Lower |
| Material | Sheet Steel |
| Additional Information 2 | with ball joint |
| Steering arm type | Control Arm |
| Paired article numbers | 181824 |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.22
Important compatibility info
| Number of Teeth | 10 |
| Outer diameter | 101 mm |
| Length | 669 mm |
| Placement on Vehicle | Left |
| Screw length below head | 613 mm |
| Function | Brake Shaft, drum brake |
| Type | Brake Shaft, drum brake |
| Weight | 7.27 kg |
| Paired article numbers | 175198 |
| Brake Shaft Cam | S-cam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.22
Important compatibility info
| Placement on Vehicle | Front |
| Type | Shock Absorber, driver cab suspension |
| Function | Shock Absorber, driver cab suspension |
| Piston conrod diameter | 12 mm |
| Pipe Diameter | 54 mm. 44 mm |
| Min. Length | 224 mm |
| Max. Length | 340 mm |
| Shock Absorber Mounting Type | Top pin, Bottom Pin |
| Weight | 1.4 kg |
| Operating Mode | Pneumatic |
| External Thread Size | M12 x 1,75 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.22
Important compatibility info
| Operating Mode | Electric |
| Paired article numbers | 24139 |
| Weight | 0.524 kg |
| Placement on Vehicle | Right Rear |
| Function | Window Regulator |
| Type | Window Regulator |
| Additional Information | without electric motor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.22
Important compatibility info
| Weight | 3.0 kg |
| Placement on Vehicle | Rear |
| Operating Mode | Mechanical |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 344 mm |
| Min. Length | 249 mm |
| Pipe Diameter | 40 mm |
| Mounting points diameter | 12 mm |
| Piston conrod diameter | 13 mm |
| Type | Shock Absorber, driver cab suspension |
| Function | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.22
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023