Proud to be a UK-based company
Contact us
Important compatibility info
| Pipe Diameter | 53 mm. 45 mm |
| Mounting points diameter | 16 mm |
| Piston conrod diameter | 12.5 mm |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 397 mm |
| Shock Absorber Type | Oil Pressure |
| Function | Shock Absorber |
| Min. Length | 317 mm |
| Placement on Vehicle | Front Axle |
| Type | Shock Absorber |
| Weight | 1.83 kg |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.63
Important compatibility info
| Weight | 0.390 kg |
| Placement on Vehicle | Lower |
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 94 |
| Type | Timing Chain |
| Function | Timing Chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.63
Important compatibility info
| Weight | 1.700 kg |
| Additional Information | with thrust ring |
| Function | Repair Kit, flywheel |
| Screw length below head | 81 mm |
| Type | Repair Kit, flywheel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Shaft Seal, crankshaft (01203)
- 10x Febi Flywheel Bolt (46996)
- 1x Febi Pilot Bearing, clutch (04515)
- 1x Febi Ring Gear, crankshaft (07720)
£57.64
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Upper |
| Additional Information | with rubber-metal mounts |
| Material | Cast Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 184454 |
| Weight | 3.328 kg |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.64
Important compatibility info
| Weight | 0.355 kg |
| Height | 98 mm |
| Width | 122 mm |
| Inspection Tag | EMC, ADR |
| Port / Connector type | DIN Connector |
| Rated Power | 12 W |
| Light Design | LED |
| Voltage from | 9 V |
| Voltage to | 30 V |
| Protection Type (IP Code) | IP67 |
| Type | Rotating Beacon |
| Fulfils ECE norm | R65, R10 |
| Temperature range from | -30 °C |
| Temperature range to | 50 °C |
| Function | Rotating Beacon |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.66
Important compatibility info
| Refrigerant | R 134a |
| Material | Aluminium |
| Thickness | 33 mm |
| Number of Connectors / Ports | 4 |
| Weight | 0.133 kg |
| Type | Expansion Valve, air conditioning |
| Function | Expansion Valve, air conditioning |
| Internal Thread Size | M6 x 1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.66
Important compatibility info
| Bearing Type | Angular Ball Bearing |
| Sealing lip material | NBR (nitrile butadiene rubber) |
| Function | Wheel Bearing Kit |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Width | 44 mm |
| Outer diameter | 91 mm |
| Inner diameter | 51 mm |
| Additional Information | with axle nut |
| Additional Information 2 | with integrated magnetic sensor ring, with ABS sensor ring, with retaining ring |
| Type | Wheel Bearing Kit |
| Weight | 1.2 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.67
Important compatibility info
| Surface | Coated |
| Centering Diameter | 62 mm |
| Minimum thickness | 10.5 mm |
| Brake Disc Thickness | 12 mm |
| Weight | 5.320 kg |
| Function | Brake Disc |
| Rim Hole Number | 5 -Hole |
| Rotor Style | Solid |
| Type | Brake Disc Rotor |
| Bolt Hole Circle Diameter | 114.3 mm |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 290 mm |
| Thickness | 53.3 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.67
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Material | Rubber/Metal |
| Additional Information 2 | without ball bearing |
| Weight | 1.145 kg |
| Type | Suspension Strut Support Mount |
| Function | Suspension Strut Support Mount |
| External Thread Size | M10 x 1,25 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.68
Important compatibility info
| Weight | 0.42 kg |
| Chain Type | Silent Chain, Closed chain |
| Number of Chain Links | 44 |
| Timing Chain Size | Z53R |
| Type | Chain Kit, oil pump drive |
| Function | Chain Kit, oil pump drive |
| Extra Description | Standard Medium Kit |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Chain, oil pump drive (48334)
- 1x Febi Sprocket, crankshaft (48743)
- 1x Febi Sprocket/Gear, oil pump (48332)
- 1x Febi Screw (48337)
- 1x Febi Centering Bolt, crankshaft pulley (33618)
£57.68
Important compatibility info
| Inner diameter 1 | 31 mm |
| Weight | 0.503 kg |
| Inner diameter 3 | 7.5 mm |
| Function | Radiator Hose |
| Type | Radiator Hose |
| Cooling Hose | from engine to engine cooler |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Inner diameter 2 | 8 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.68
Important compatibility info
| Additional Information | with nuts |
| Weight | 3.62 kg |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Width | 59 mm |
| Outer diameter | 70 mm |
| Thickness | 80 mm |
| Inner diameter | 31 mm |
| Number of Holes | 5 |
| Bolt Hole Circle Diameter | 105 mm |
| Number of Connectors / Ports | 2 |
| Bearing Type | Angular Ball Bearing |
| Function | Wheel Bearing Kit |
| Type | Wheel Bearing Kit |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated ABS sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.69
Important compatibility info
| Rim Hole Number | 6 -Hole |
| Rotor Style | Internally Vented |
| Weight | 7.390 kg |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 313 mm |
| Thickness | 82 mm |
| Brake Disc Thickness | 18 mm |
| Minimum thickness | 16.6 mm |
| Bolt Hole Circle Diameter | 139.7 mm |
| Centering Diameter | 101 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Function | Brake Disc |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.69
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Weight | 3.6 kg |
| Outer diameter | 265 mm |
| Thickness | 38 mm |
| Brake Disc Thickness | 10 mm |
| Minimum thickness | 8.5 mm |
| Rim Hole Number | 5 -Hole |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
| Rotor Style | Solid |
| Surface | Coated |
| Centering Diameter | 55 mm |
| Bolt Hole Circle Diameter | 100 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.70
Important compatibility info
| Number of Connectors / Ports | 2 |
| Function | Sensor, exhaust gas temperature |
| Weight | 0.07 kg |
| Type | Sensor, exhaust gas temperature |
| for OE number | 8E0 906 088 |
| Placement on Vehicle | before soot particulate filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.72
Important compatibility info
| Number of Connectors / Ports | 2 |
| Function | Sensor, exhaust gas temperature |
| Type | Sensor, exhaust gas temperature |
| Weight | 0.07 kg |
| for OE number | 059 906 088 P |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.72
Important compatibility info
| Rim Hole Number | 5 -Hole |
| Weight | 6.590 kg |
| Rotor Style | Internally Vented |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 309 mm |
| Thickness | 69.8 mm |
| Brake Disc Thickness | 18 mm |
| Minimum thickness | 16.5 mm |
| Bolt Hole Circle Diameter | 114.3 mm |
| Centering Diameter | 62 mm |
| Surface | Coated |
| Number of mounting bores | 3 |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.72
Important compatibility info
| Weight | 4.620 kg |
| Placement on Vehicle | Front Axle Left, Lower |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 28096 |
| Cone Size | 18 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with holder, with rubber mounts, with lock nut |
| Additional Information 2 | with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.72
Important compatibility info
| Weight | 4.620 kg |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 28095 |
| Cone Size | 18 mm |
| Placement on Vehicle | Front Axle Right, Lower |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with lock nut, with holder, with rubber mounts |
| Additional Information 2 | with ball joint |
Additional Information
Technical Information
For vehicles equipped with xenon headlights a threaded sleeve with OE comparison no. 1353196 (Ford) respectively 999362 (Volvo) has to be fitted additionally.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.72
Important compatibility info
| Weight | 3.50 kg |
| Additional Information | with fastening/mounting material |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Width | 85 mm |
| Outer diameter | 137 mm |
| Inner diameter | 30 mm |
| Number of Holes | 5 |
| Bolt Hole Circle Diameter | 105 mm |
| Bearing Type | Angular Ball Bearing |
| Type | Wheel Bearing Kit |
| Function | Wheel Bearing Kit |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated ABS sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.73
Important compatibility info
| Minimum thickness | 16 mm |
| Brake Disc Thickness | 18 mm |
| Rim Hole Number | 5 -Hole |
| Rotor Style | Internally Vented |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
| Weight | 6.060 kg |
| Number of mounting bores | 1 |
| Centering Diameter | 72 mm |
| Surface | Coated |
| Bolt Hole Circle Diameter | 114.3 mm |
| Outer diameter | 302 mm |
| Thickness | 45 mm |
| Placement on Vehicle | Rear Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.73
Important compatibility info
| Placement on Vehicle | transmission sided, Front Axle |
| Length | 81 mm |
| Material | Thermoplast |
| Inner diameter 1 | 19 mm |
| Inner diameter 2 | 63 mm |
| Weight | 0.209 kg |
| Joint Type | Tripod Joint |
| Type | Bellow Kit, drive shaft |
| Function | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow Kit, drive shaft (179717)
- 1x Febi Molybdenum Grease (02582)
£57.73
Important compatibility info
| Placement on Vehicle | Left Rear |
| Operating Mode | Electric |
| Paired article numbers | 24140 |
| Function | Window Regulator |
| Additional Information | without electric motor |
| Weight | 0.524 kg |
| Type | Window Regulator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.73
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Cone Size | 18 mm |
| Weight | 3.436 kg |
| Paired article numbers | 177893 |
| Steering arm type | Control Arm |
| Additional Information 2 | with ball joint |
| Material | Sheet Steel |
| Placement on Vehicle | Front Axle Right |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.74
Important compatibility info
| Additional Information | with quick coupling |
| Function | Radiator Hose |
| Inner diameter 3 | 19 mm |
| Type | Radiator Hose |
| Cooling Hose | from coolant regulator housing to engine cooler |
| Weight | 1.021 kg |
| Inner diameter 2 | 30 mm |
| Inner diameter 1 | 29 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.74
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Cone Size | 18 mm |
| Weight | 3.436 kg |
| Paired article numbers | 177891 |
| Steering arm type | Control Arm |
| Additional Information 2 | with ball joint |
| Material | Sheet Steel |
| Placement on Vehicle | Front Axle Left |
| Additional Information | with rubber mounts |
| Type | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.74
Important compatibility info
| Placement on Vehicle | transmission sided, Front Axle Right |
| Thread Size | M10x1,5 |
| Type | Joint Kit, drive shaft |
| Internal Teeth, wheel side | 28 |
| Function | Joint Kit, drive shaft |
| Weight | 2.114 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.76
Important compatibility info
| Rotor Style | Solid |
| Weight | 6.8 kg |
| Rim Hole Number | 6 -Hole |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 280 mm |
| Thickness | 62.3 mm |
| Brake Disc Thickness | 16 mm |
| Minimum thickness | 13 mm |
| Bolt Hole Circle Diameter | 127 mm |
| Centering Diameter | 108.2 mm |
| Surface | Coated |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.76
Important compatibility info
| Weight | 5.21 kg |
| Rim Hole Number | 4 -Hole |
| Placement on Vehicle | Rear Axle |
| Width | 46 mm |
| Outer diameter | 212 mm |
| Thickness | 80 mm |
| Inner diameter | 180 mm |
| Bolt Hole Circle Diameter | 108 mm |
| Centering Diameter | 51.9 mm |
| Max.skimmed drum measure | 181 mm |
| Function | Brake Drum |
| Type | Brake Drum |
| Additional Information 2 | without wheel bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.76
Important compatibility info
| Weight | 0.164 kg |
| Type | Control Valve, camshaft adjustment |
| Extra Description | febi Plus |
| Function | Control Valve, camshaft adjustment |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.76
Important compatibility info
| Outer diameter | 1 mm |
| Number of Connectors / Ports | 3 |
| Weight | 0.1 kg |
| Type | Sensor, camshaft position |
| Function | Sensor, camshaft position |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.78
Important compatibility info
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with ABS sensor ring |
| Weight | 3.12 kg |
| Width | 48 mm |
| Outer diameter | 85 mm |
| Inner diameter | 27.5 mm |
| Number of Holes | 5 |
| Bolt Hole Circle Diameter | 112 mm |
| Number of mounting bores | 4 |
| Function | Wheel Bearing Kit |
| Type | Wheel Bearing Kit |
| Bearing Type | Rolling Bearing |
| Outer diameter 2 | 136 mm |
| Outer diameter 1 | 65 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.79
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Bore Diameter | 12 mm. 14 mm |
| Shock Absorber Type | Gas Pressure |
| Shock Absorber System | Twin-Tube |
| Shock Absorber Design | Telescopic Shock Absorber |
| Weight | 1.400 kg |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Mounting bores distance | 399 mm |
| Max. Length | 399 mm |
| Min. Length | 268 mm |
| Pipe Diameter | 53 mm. 45 mm |
| Piston conrod diameter | 12.5 mm |
| Type | Shock Absorber |
| Function | Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.79
Important compatibility info
| Weight | 1.100 kg |
| for OE number | 1261 652 |
| Type | Clutch Release Bearing |
| Function | Clutch Release Bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.79
Important compatibility info
| Max.skimmed drum measure | 230.1 mm |
| Rim Hole Number | 4 -Hole |
| Type | Brake Drum |
| Function | Brake Drum |
| Thickness | 76.7 mm |
| Weight | 7.9 kg |
| Centering Diameter | 62.2 mm |
| Outer diameter | 273 mm |
| Placement on Vehicle | Rear Axle |
| Width | 51 mm |
| Inner diameter | 228.5 mm |
| Bolt Hole Circle Diameter | 108 mm |
| Additional Information 2 | with wheel bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.79
Important compatibility info
| Material | Metal |
| Outer diameter | 76 mm |
| Operating Mode | Automatic |
| Weight | 0.720 kg |
| Type | Belt Tensioner, v-ribbed belt |
| Function | Belt Tensioner, v-ribbed belt |
| Width of castor bearing surface | 24 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.80
Important compatibility info
| Number of Connectors / Ports | 2 |
| Opening Temperature | 88 °C |
| Function | Thermostat, coolant |
| Weight | 0.45 kg |
| Type | Thermostat, coolant |
| Additional Information | with temperature sensor |
| Additional Information 2 | with seal ring |
| Housing Type | with housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.80
Important compatibility info
| Weight | 0.022 kg |
| Number of Connectors / Ports | 4 |
| Function | Sensor, intake manifold pressure |
| Type | Sensor, intake manifold pressure |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.80
Important compatibility info
| Material | Silicone |
| Inner diameter | 55 mm |
| Function | Radiator Hose |
| Weight | 0.21 kg |
| Type | Radiator Hose |
| Replaces | 46179 |
| Hose Length | 230 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.80
Important compatibility info
| Placement on Vehicle | Right Rear |
| Operating Mode | Electric |
| Paired article numbers | 26721 |
| Function | Window Regulator |
| Weight | 0.655 kg |
| Type | Window Regulator |
| Additional Information | without electric motor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.81
Important compatibility info
| Function | Belt Tensioner, V-ribbed belt |
| Material | Metal |
| Width of castor bearing surface | 46 mm |
| Type | Belt Tensioner, V-ribbed belt |
| Weight | 2.036 kg |
| Operating Mode | Automatic |
| Outer diameter | 74 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.81
Important compatibility info
| Weight | 1.51 kg |
| Track rollers material | Metal |
| Function | Belt Tensioner, v-ribbed belt |
| Outer diameter | 85 mm |
| Operating Mode | Automatic |
| Housing material | Aluminium |
| Replaces | 23006 |
| Width of castor bearing surface | 32 mm |
| Type | Belt Tensioner, v-ribbed belt |
| Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.82
Important compatibility info
| Placement on Vehicle | Left |
| Weight | 0.997 kg |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, manual transmission |
| Type | Mounting, manual transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.83
Important compatibility info
| Additional Information 2 | with seal ring |
| Weight | 0.043 kg |
| Spanner Size | 27 |
| Number of Connectors / Ports | 3 |
| Function | Sensor, fuel pressure |
| Tightening Torque | 45 Nm |
| Type | Sensor, fuel pressure |
| External Thread Size | M12 x 1,5 |
| for OE number | 1920.GW S1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Sensor, fuel pressure (45177)
- 1x Febi Seal Set, injection system (45169)
£57.84
Important compatibility info
| Weight | 2.833 kg |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Width | 20 mm |
| Outer diameter | 91 mm |
| Inner diameter | 31 mm |
| Bearing Type | Angular Ball Bearing |
| Type | Wheel Bearing Kit |
| Sealing lip material | HNBR (hydrogenated nitrile butadiene rubber) |
| Function | Wheel Bearing Kit |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with ABS sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.84
Important compatibility info
| Weight | 7.050 kg |
| Rotor Style | Internally Vented |
| Placement on Vehicle | Front Axle |
| Outer diameter | 292 mm |
| Thickness | 73.2 mm |
| Brake Disc Thickness | 22 mm |
| Minimum thickness | 20.4 mm |
| Bolt Hole Circle Diameter | 120 mm |
| Centering Diameter | 79 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Function | Brake Disc |
| Rim Hole Number | 5 -Hole |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.85
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Outer diameter | 300 mm |
| Thickness | 53.5 mm |
| Rim Hole Number | 5 -Hole |
| Weight | 6.926 kg |
| Replaces | 23210 |
| Function | Brake Disc |
| Number of mounting bores | 1 |
| Surface | Coated |
| Centering Diameter | 67 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Minimum thickness | 19.4 mm |
| Brake Disc Thickness | 22 mm |
| Rotor Style | Internally Vented |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.85
Important compatibility info
| Rim Hole Number | 5 -Hole |
| Weight | 6.35 kg |
| Placement on Vehicle | Front Axle |
| Outer diameter | 284 mm |
| Thickness | 73 mm |
| Brake Disc Thickness | 22 mm |
| Minimum thickness | 20.4 mm |
| Bolt Hole Circle Diameter | 120 mm |
| Function | Brake Disc |
| Rotor Style | Internally Vented |
| Number of mounting bores | 1 |
| Surface | Coated |
| Centering Diameter | 79 mm |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.85
Important compatibility info
| Rotor Style | Internally Vented |
| Rim Hole Number | 5 -Hole |
| Weight | 5.4 kg |
| Placement on Vehicle | Front Axle |
| Outer diameter | 258 mm |
| Thickness | 58.3 mm |
| Brake Disc Thickness | 24 mm |
| Bolt Hole Circle Diameter | 110 mm |
| Surface | Coated |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.85
Important compatibility info
| Placement on Vehicle | Front Axle Right, Lower |
| Steering arm type | Control Arm |
| Additional Information | with rubber mounts |
| Paired article numbers | 174770 |
| Additional Information 2 | without ball joint |
| Material | Cast Steel |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Weight | 5.218 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.85
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023