Proud to be a UK-based company
Contact us
Important compatibility info
| Weight | 4.620 kg |
| Placement on Vehicle | Front Axle Left, Lower |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 28096 |
| Cone Size | 18 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with holder, with rubber mounts, with lock nut |
| Additional Information 2 | with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.72
Important compatibility info
| Weight | 4.620 kg |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 28095 |
| Cone Size | 18 mm |
| Placement on Vehicle | Front Axle Right, Lower |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with lock nut, with holder, with rubber mounts |
| Additional Information 2 | with ball joint |
Additional Information
Technical Information
For vehicles equipped with xenon headlights a threaded sleeve with OE comparison no. 1353196 (Ford) respectively 999362 (Volvo) has to be fitted additionally.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.72
Important compatibility info
| Placement on Vehicle | transmission sided, Front Axle |
| Length | 81 mm |
| Material | Thermoplast |
| Inner diameter 1 | 19 mm |
| Inner diameter 2 | 63 mm |
| Weight | 0.209 kg |
| Joint Type | Tripod Joint |
| Type | Bellow Kit, drive shaft |
| Function | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow Kit, drive shaft (179717)
- 1x Febi Molybdenum Grease (02582)
£57.73
Important compatibility info
| Placement on Vehicle | Left Rear |
| Operating Mode | Electric |
| Paired article numbers | 24140 |
| Function | Window Regulator |
| Additional Information | without electric motor |
| Weight | 0.524 kg |
| Type | Window Regulator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.73
Important compatibility info
| Weight | 3.50 kg |
| Additional Information | with fastening/mounting material |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Width | 85 mm |
| Outer diameter | 137 mm |
| Inner diameter | 30 mm |
| Number of Holes | 5 |
| Bolt Hole Circle Diameter | 105 mm |
| Bearing Type | Angular Ball Bearing |
| Type | Wheel Bearing Kit |
| Function | Wheel Bearing Kit |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated ABS sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.73
Important compatibility info
| Minimum thickness | 16 mm |
| Brake Disc Thickness | 18 mm |
| Rim Hole Number | 5 -Hole |
| Rotor Style | Internally Vented |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
| Weight | 6.060 kg |
| Number of mounting bores | 1 |
| Centering Diameter | 72 mm |
| Surface | Coated |
| Bolt Hole Circle Diameter | 114.3 mm |
| Outer diameter | 302 mm |
| Thickness | 45 mm |
| Placement on Vehicle | Rear Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.73
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | Front Axle Right |
| Material | Sheet Steel |
| Additional Information 2 | with ball joint |
| Steering arm type | Control Arm |
| Paired article numbers | 180831 |
| Weight | 2.4 kg |
| Cone Size | 17 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.74
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Cone Size | 18 mm |
| Weight | 3.436 kg |
| Paired article numbers | 177891 |
| Steering arm type | Control Arm |
| Additional Information 2 | with ball joint |
| Material | Sheet Steel |
| Placement on Vehicle | Front Axle Left |
| Additional Information | with rubber mounts |
| Type | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.74
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Cone Size | 18 mm |
| Weight | 3.436 kg |
| Paired article numbers | 177893 |
| Steering arm type | Control Arm |
| Additional Information 2 | with ball joint |
| Material | Sheet Steel |
| Placement on Vehicle | Front Axle Right |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.74
Important compatibility info
| Additional Information | with quick coupling |
| Function | Radiator Hose |
| Inner diameter 3 | 19 mm |
| Type | Radiator Hose |
| Cooling Hose | from coolant regulator housing to engine cooler |
| Weight | 1.021 kg |
| Inner diameter 2 | 30 mm |
| Inner diameter 1 | 29 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.74
Important compatibility info
| Weight | 5.21 kg |
| Rim Hole Number | 4 -Hole |
| Placement on Vehicle | Rear Axle |
| Width | 46 mm |
| Outer diameter | 212 mm |
| Thickness | 80 mm |
| Inner diameter | 180 mm |
| Bolt Hole Circle Diameter | 108 mm |
| Centering Diameter | 51.9 mm |
| Max.skimmed drum measure | 181 mm |
| Function | Brake Drum |
| Type | Brake Drum |
| Additional Information 2 | without wheel bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.76
Important compatibility info
| Placement on Vehicle | transmission sided, Front Axle Right |
| Thread Size | M10x1,5 |
| Type | Joint Kit, drive shaft |
| Internal Teeth, wheel side | 28 |
| Function | Joint Kit, drive shaft |
| Weight | 2.114 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.76
Important compatibility info
| Rotor Style | Solid |
| Weight | 6.8 kg |
| Rim Hole Number | 6 -Hole |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 280 mm |
| Thickness | 62.3 mm |
| Brake Disc Thickness | 16 mm |
| Minimum thickness | 13 mm |
| Bolt Hole Circle Diameter | 127 mm |
| Centering Diameter | 108.2 mm |
| Surface | Coated |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.76
Important compatibility info
| Weight | 0.164 kg |
| Type | Control Valve, camshaft adjustment |
| Extra Description | febi Plus |
| Function | Control Valve, camshaft adjustment |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.76
Important compatibility info
| Outer diameter | 1 mm |
| Number of Connectors / Ports | 3 |
| Weight | 0.1 kg |
| Type | Sensor, camshaft position |
| Function | Sensor, camshaft position |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.78
Important compatibility info
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with ABS sensor ring |
| Weight | 3.12 kg |
| Width | 48 mm |
| Outer diameter | 85 mm |
| Inner diameter | 27.5 mm |
| Number of Holes | 5 |
| Bolt Hole Circle Diameter | 112 mm |
| Number of mounting bores | 4 |
| Function | Wheel Bearing Kit |
| Type | Wheel Bearing Kit |
| Bearing Type | Rolling Bearing |
| Outer diameter 2 | 136 mm |
| Outer diameter 1 | 65 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.79
Important compatibility info
| Max.skimmed drum measure | 230.1 mm |
| Rim Hole Number | 4 -Hole |
| Type | Brake Drum |
| Function | Brake Drum |
| Thickness | 76.7 mm |
| Weight | 7.9 kg |
| Centering Diameter | 62.2 mm |
| Outer diameter | 273 mm |
| Placement on Vehicle | Rear Axle |
| Width | 51 mm |
| Inner diameter | 228.5 mm |
| Bolt Hole Circle Diameter | 108 mm |
| Additional Information 2 | with wheel bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.79
Important compatibility info
| Weight | 1.100 kg |
| for OE number | 1261 652 |
| Type | Clutch Release Bearing |
| Function | Clutch Release Bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.79
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Bore Diameter | 12 mm. 14 mm |
| Shock Absorber Type | Gas Pressure |
| Shock Absorber System | Twin-Tube |
| Shock Absorber Design | Telescopic Shock Absorber |
| Weight | 1.400 kg |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Mounting bores distance | 399 mm |
| Max. Length | 399 mm |
| Min. Length | 268 mm |
| Pipe Diameter | 53 mm. 45 mm |
| Piston conrod diameter | 12.5 mm |
| Type | Shock Absorber |
| Function | Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.79
Important compatibility info
| Material | Metal |
| Outer diameter | 76 mm |
| Operating Mode | Automatic |
| Weight | 0.720 kg |
| Type | Belt Tensioner, v-ribbed belt |
| Function | Belt Tensioner, v-ribbed belt |
| Width of castor bearing surface | 24 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.80
Important compatibility info
| Material | Silicone |
| Inner diameter | 55 mm |
| Function | Radiator Hose |
| Weight | 0.21 kg |
| Type | Radiator Hose |
| Replaces | 46179 |
| Hose Length | 230 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.80
Important compatibility info
| Number of Connectors / Ports | 2 |
| Opening Temperature | 88 °C |
| Function | Thermostat, coolant |
| Weight | 0.45 kg |
| Type | Thermostat, coolant |
| Additional Information | with temperature sensor |
| Additional Information 2 | with seal ring |
| Housing Type | with housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.80
Important compatibility info
| Weight | 0.022 kg |
| Number of Connectors / Ports | 4 |
| Function | Sensor, intake manifold pressure |
| Type | Sensor, intake manifold pressure |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.80
Important compatibility info
| Function | Belt Tensioner, V-ribbed belt |
| Material | Metal |
| Width of castor bearing surface | 46 mm |
| Type | Belt Tensioner, V-ribbed belt |
| Weight | 2.036 kg |
| Operating Mode | Automatic |
| Outer diameter | 74 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.81
Important compatibility info
| Placement on Vehicle | Right Rear |
| Operating Mode | Electric |
| Paired article numbers | 26721 |
| Function | Window Regulator |
| Weight | 0.655 kg |
| Type | Window Regulator |
| Additional Information | without electric motor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.81
Important compatibility info
| Weight | 1.51 kg |
| Track rollers material | Metal |
| Function | Belt Tensioner, v-ribbed belt |
| Outer diameter | 85 mm |
| Operating Mode | Automatic |
| Housing material | Aluminium |
| Replaces | 23006 |
| Width of castor bearing surface | 32 mm |
| Type | Belt Tensioner, v-ribbed belt |
| Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.82
Important compatibility info
| Placement on Vehicle | Left |
| Weight | 0.997 kg |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, manual transmission |
| Type | Mounting, manual transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.83
Important compatibility info
| Additional Information 2 | with seal ring |
| Weight | 0.043 kg |
| Spanner Size | 27 |
| Number of Connectors / Ports | 3 |
| Function | Sensor, fuel pressure |
| Tightening Torque | 45 Nm |
| Type | Sensor, fuel pressure |
| External Thread Size | M12 x 1,5 |
| for OE number | 1920.GW S1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Sensor, fuel pressure (45177)
- 1x Febi Seal Set, injection system (45169)
£57.84
Important compatibility info
| Weight | 2.833 kg |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Width | 20 mm |
| Outer diameter | 91 mm |
| Inner diameter | 31 mm |
| Bearing Type | Angular Ball Bearing |
| Type | Wheel Bearing Kit |
| Sealing lip material | HNBR (hydrogenated nitrile butadiene rubber) |
| Function | Wheel Bearing Kit |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with ABS sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.84
Important compatibility info
| Weight | 7.050 kg |
| Rotor Style | Internally Vented |
| Placement on Vehicle | Front Axle |
| Outer diameter | 292 mm |
| Thickness | 73.2 mm |
| Brake Disc Thickness | 22 mm |
| Minimum thickness | 20.4 mm |
| Bolt Hole Circle Diameter | 120 mm |
| Centering Diameter | 79 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Function | Brake Disc |
| Rim Hole Number | 5 -Hole |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.85
Important compatibility info
| Rim Hole Number | 5 -Hole |
| Weight | 6.35 kg |
| Placement on Vehicle | Front Axle |
| Outer diameter | 284 mm |
| Thickness | 73 mm |
| Brake Disc Thickness | 22 mm |
| Minimum thickness | 20.4 mm |
| Bolt Hole Circle Diameter | 120 mm |
| Function | Brake Disc |
| Rotor Style | Internally Vented |
| Number of mounting bores | 1 |
| Surface | Coated |
| Centering Diameter | 79 mm |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.85
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Outer diameter | 300 mm |
| Thickness | 53.5 mm |
| Rim Hole Number | 5 -Hole |
| Weight | 6.926 kg |
| Replaces | 23210 |
| Function | Brake Disc |
| Number of mounting bores | 1 |
| Surface | Coated |
| Centering Diameter | 67 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Minimum thickness | 19.4 mm |
| Brake Disc Thickness | 22 mm |
| Rotor Style | Internally Vented |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.85
Important compatibility info
| Placement on Vehicle | Front Axle Right, Lower |
| Steering arm type | Control Arm |
| Additional Information | with rubber mounts |
| Paired article numbers | 174770 |
| Additional Information 2 | without ball joint |
| Material | Cast Steel |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Weight | 5.218 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.85
Important compatibility info
| Weight | 5.218 kg |
| Steering arm type | Control Arm |
| Material | Cast Steel |
| Additional Information | with rubber mounts |
| Paired article numbers | 174769 |
| Additional Information 2 | without ball joint |
| Placement on Vehicle | Front Axle Left, Lower |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.85
Important compatibility info
| Rotor Style | Internally Vented |
| Rim Hole Number | 5 -Hole |
| Weight | 5.4 kg |
| Placement on Vehicle | Front Axle |
| Outer diameter | 258 mm |
| Thickness | 58.3 mm |
| Brake Disc Thickness | 24 mm |
| Bolt Hole Circle Diameter | 110 mm |
| Surface | Coated |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.85
Important compatibility info
| Weight | 0.052 kg |
| Placement on Vehicle | before soot particulate filter |
| Spanner Size | 17 |
| Cable Length | 360 mm |
| Type | Sensor, exhaust gas temperature |
| Function | Sensor, exhaust gas temperature |
| External Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.86
Important compatibility info
| Placement on Vehicle | Front Axle Right, Lower |
| Function | Control/Trailing Arm, wheel suspension |
| Material | Sheet Steel |
| Steering arm type | Triangular Control Arm (CV), Control Arm |
| Paired article numbers | 177836 |
| Weight | 5.001 kg |
| Cone Size | 21 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Additional Information | with rubber mounts, with holder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.86
Important compatibility info
| Placement on Vehicle | Front Axle Left, Lower |
| Function | Control/Trailing Arm, wheel suspension |
| Material | Sheet Steel |
| Additional Information 2 | with ball joint |
| Steering arm type | Triangular Control Arm (CV), Control Arm |
| Paired article numbers | 177835 |
| Weight | 5.001 kg |
| Cone Size | 21 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with holder, with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.86
Important compatibility info
| Spanner Size | 22 |
| Weight | 0.170 kg |
| for OE number | 1628.2T |
| Cable Length | 1500 mm |
| Number of circuits | 4 |
| Lambda Sensor | Heated |
| Type | Oxygen Sensor |
| Function | Oxygen Sensor |
| External Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.86
Important compatibility info
| Weight | 2.221 kg |
| Width | 20 mm |
| Outer diameter | 80 mm |
| Inner diameter | 55 mm |
| Function | Suspension, propshaft |
| Type | Suspension, propshaft |
| Additional Information 2 | with ball bearing |
| Bearing Type | Rolling Bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.88
Important compatibility info
| Operating Mode | Electric |
| Function | Steering Lock |
| Housing material | Metal |
| Type | Steering Lock |
| Weight | 0.472 kg |
| Additional Information 2 | with bolts/screws, with switch |
| Number of Connectors / Ports | 4 |
| Lock System | with two keys, with lock barrel |
| Cable Length | 355 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.88
Important compatibility info
| Weight | 2.50 kg |
| Additional Information | with rubber-metal mounts |
| Placement on Vehicle | Front Axle |
| Length | 280 mm |
| Thickness | 41 mm |
| Inner diameter | 20 mm |
| Rod/Strut | Coupling Rod |
| Type | Link/Coupling Rod, stabiliser bar |
| Function | Link/Coupling Rod, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.91
Important compatibility info
| Function | Oil sump |
| Weight | 2.245 kg |
| Extra Description | febi Plus |
| Type | Oil sump |
| Additional Information 2 | without bore for oil level sensor |
| Wet Sump Material | Aluminium |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.91
Important compatibility info
| Function | Sealing Set, air compressor |
| for OE number | 001 130 36 15 S2 |
| Type | Sealing Set, air compressor |
| Weight | 0.3 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.92
Important compatibility info
| Centering Diameter | 59 mm |
| Weight | 5.54 kg |
| Type | Brake Drum |
| Rim Hole Number | 4 -Hole |
| Thickness | 61 mm |
| Number of mounting bores | 2 |
| Max.skimmed drum measure | 230 mm |
| Function | Brake Drum |
| Inner diameter | 228.3 mm |
| Bolt Hole Circle Diameter | 98 mm |
| Outer diameter | 267.8 mm |
| Width | 48.2 mm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.92
Important compatibility info
| Placement on Vehicle | Right |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Weight | 1.170 kg |
| for OE number | 11 21 037 37R |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.94
Important compatibility info
| Placement on Vehicle | after soot particulate filter |
| Number of Connectors / Ports | 2 |
| Weight | 0.051 kg |
| Cable Length | 175 mm |
| Type | Sensor, exhaust gas temperature |
| Function | Sensor, exhaust gas temperature |
| External Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.94
Important compatibility info
| Outer diameter | 127 mm |
| Thickness | 25.7 mm |
| Inner diameter | 30 mm |
| Number of Ribs | 5 |
| Parameter | 6PK |
| Function | Belt Pulley, crankshaft |
| Weight | 1.66 kg |
| Type | Belt Pulley, crankshaft |
| for OE number | 0515.K6 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.94
Important compatibility info
| Weight | 6.945 kg |
| Rotor Style | Solid |
| Rim Hole Number | 5 -Hole |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 304 mm |
| Thickness | 62.3 mm |
| Brake Disc Thickness | 12.7 mm |
| Minimum thickness | 11.8 mm |
| Bolt Hole Circle Diameter | 120 mm |
| Centering Diameter | 70 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.94
Important compatibility info
| Rim Hole Number | 5 -Hole |
| Placement on Vehicle | Front Axle |
| Outer diameter | 308 mm |
| Thickness | 50.1 mm |
| Brake Disc Thickness | 27 mm |
| Minimum thickness | 25 mm |
| Bolt Hole Circle Diameter | 108 mm |
| Centering Diameter | 63 mm |
| Surface | Coated |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
| Weight | 8.8 kg |
| Rotor Style | Internally Vented |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£57.95
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023