Important compatibility info
Placement on Vehicle | Rear Axle |
Length | 654 mm |
Steering arm type | Trailing Arm |
Pipe Diameter | 48 mm |
Mounting points diameter | 17 mm |
Function | Control/Trailing Arm, wheel suspension |
Weight | 7.9 kg |
Type | Control/Trailing Arm, wheel suspension |
Hole Spacing | 115 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Drive Shaft |
Transmission-side joint diameter | 74.3 mm |
Type | Drive Shaft |
Min. Length | 615 mm |
External Teeth, Diff.Side | 22 |
Weight | 5.308 kg |
External Teeth, Wheel Side | 21 |
Thread Size | M20x1,5 |
Additional Information 2 | with nut |
Placement on Vehicle | Front Axle Left |
Wheel Sided Joint Diameter | 79 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Filter, cabin air |
Length | 447 mm |
Height | 25 mm |
Width | 206 mm |
Weight | 0.28 kg |
Type | Filter, cabin air |
Filter type | Activated Carbon Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Connectors / Ports | 6 |
for OE number | 4 515 688 |
Weight | 0.038 kg |
Type | Mass Air Flow Sensor |
Function | Mass Air Flow Sensor |
Resistor Type | Hot-film Sensor |
Housing Type | without housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 286 mm. 259 mm |
Weight | 12.5 kg |
Thickness | 752 mm. 257 mm |
Function | Bellow, air suspension |
External Thread Size | M22 x 1,5, M12 x 1,75 |
Type | Bellow, air suspension |
Additional Information | with piston |
Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Interior Blower |
Driver Position | for right-hand drive vehicles |
Weight | 1.58 kg |
Voltage | 12 V |
Type | Interior Blower |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Interior Blower |
Function | Interior Blower |
Weight | 1.6 kg |
Voltage | 12 V |
Number of Connectors / Ports | 4 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Extra Description | febi Plus |
Function | Sensor, fuel pressure |
Type | Sensor, fuel pressure |
Weight | 0.06 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 230 mm |
Combi Switch Function | with indicator function, with klaxon |
Width | 80 mm |
Thickness | 42 mm |
Number of Connectors / Ports | 8 |
Cable Length | 880 mm |
Function | Direction Indicator Switch / Steering Column Switch / Switch, klaxon |
Weight | 0.33 kg |
Type | Direction Indicator Switch / Steering Column Switch / Switch, klaxon |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Timing Chain Kit |
Chain Type | Silent Chain, Closed chain |
Weight | 0.667 kg |
Number of Chain Links | 164 |
for OE number | 12761-78K00-000 S1 |
Type | Timing Chain Kit |
Additional Information | with slide rails, with chain tensioner |
Extra Description | Basic Short Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (49729)
- 1x Febi Tensioner, timing chain (107201)
- 1x Febi Guide, timing chain (104195)
- 1x Febi Guide, timing chain (104196)
Important compatibility info
Material | Plastic |
Number of Connectors / Ports | 2 |
Weight | 0.02 kg |
Type | Sensor, coolant level |
Function | Sensor, coolant level |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Mounting, control/trailing arm |
Placement on Vehicle | inner, Upper, Front Axle Left, Front Axle Right |
Weight | 0.160 kg |
Material | Rubber/Metal |
Type | Mounting, control/trailing arm |
Outer diameter | 60 mm |
Thickness | 62 mm |
Inner diameter | 10 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Bore Diameter | 19 mm |
Fill Medium | Brake Fluid |
Function | Master Cylinder, clutch |
Weight | 0.130 kg |
Type | Master Cylinder, clutch |
for OE number | 21 52 6 758 820 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Aluminium |
Outer diameter | 67 mm |
Inner diameter | 14 mm |
Paired article numbers | 17453 |
Placement on Vehicle | Rear Axle Left, Front, Rear Axle Right |
Thickness | 60 mm |
Function | Bushing, axle beam |
Weight | 0.28 kg |
Type | Bushing, axle beam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Connectors / Ports | 2 |
Cable Length | 210 mm |
Function | Knock Sensor |
Weight | 0.057 kg |
Type | Knock Sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Suspension Strut Support Mount |
Type | Suspension Strut Support Mount |
Additional Information 2 | without ball bearing |
Weight | 0.748 kg |
Material | Rubber/Metal |
Placement on Vehicle | Front Axle Right, Front Axle Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Brake Caliper |
Placement on Vehicle | Rear Axle Left |
Material | Cast Iron |
Brake Caliper Type | Brake Caliper (1 piston) |
Paired article numbers | 178148 |
Weight | 1.475 kg |
Function | Brake Caliper |
Brake caliper piston diameter | 35 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Brake Caliper |
Placement on Vehicle | Front Axle Left |
Material | Cast Iron |
Brake Caliper Type | Brake Caliper (1 piston) |
Paired article numbers | 179460 |
Weight | 2.893 kg |
Function | Brake Caliper |
Brake caliper piston diameter | 54 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.145 kg |
Placement on Vehicle | Wheel Side, transmission sided, Rear Axle Left, Rear Axle Right |
Length | 99 mm |
Material | Rubber |
Inner diameter 1 | 23 mm |
Inner diameter 2 | 57 mm |
Function | Bellow, drive shaft |
Type | Bellow, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Rotor Style | Solid |
Weight | 3.5 kg |
Placement on Vehicle | Rear Axle |
Outer diameter | 253 mm |
Thickness | 33 mm |
Brake Disc Thickness | 10 mm |
Surface | Coated |
Function | Brake Disc |
Rim Hole Number | 5 -Hole |
Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Cast Iron |
Brake Caliper Type | Brake Caliper (1 piston) |
Placement on Vehicle | Rear Axle Right |
Brake caliper piston diameter | 35 mm |
Function | Brake Caliper |
Type | Brake Caliper |
Weight | 1.557 kg |
Paired article numbers | 181154 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 410 mm |
External Thread Size | M10 x 1 |
Spanner Size | 15 |
Weight | 0.11 kg |
Type | Brake Hose |
Function | Brake Hose |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 8.970 kg |
Rotor Style | Internally Vented |
Rim Hole Number | 5 -Hole |
Placement on Vehicle | Front Axle |
Outer diameter | 325 mm |
Thickness | 62.1 mm |
Brake Disc Thickness | 25 mm |
Minimum thickness | 23.4 mm |
Bolt Hole Circle Diameter | 120 mm |
Centering Diameter | 75 mm |
Surface | Coated |
Number of mounting bores | 1 |
Function | Brake Disc |
Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Width | 74 mm |
Inner diameter | 30 mm |
Number of Holes | 5 |
Bolt Hole Circle Diameter | 120 mm |
Placement on Vehicle | Rear Axle |
Weight | 1.648 kg |
Function | Wheel Hub |
Outer diameter 2 | 145 mm |
Outer diameter 1 | 42 mm |
Type | Wheel Hub |
Additional Information 2 | without wheel bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 4.5 kg |
Thickness | 83.9 mm |
Placement on Vehicle | Rear Axle |
Max.skimmed drum measure | 201 mm |
Centering Diameter | 50.2 mm |
Bolt Hole Circle Diameter | 100 mm |
Inner diameter | 200 mm |
Outer diameter | 228 mm |
Width | 35 mm |
Function | Brake Drum |
Rim Hole Number | 4 -Hole |
Type | Brake Drum |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.798 kg |
Type | Mounting Kit, charger |
Function | Mounting Kit, charger |
for OE number | 44 23 144 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Rotor Style | Solid |
Placement on Vehicle | Front Axle |
Outer diameter | 281 mm |
Thickness | 80.5 mm |
Brake Disc Thickness | 20 mm |
Minimum thickness | 18 mm |
Bolt Hole Circle Diameter | 115 mm |
Centering Diameter | 91 mm |
Surface | Coated |
Function | Brake Disc |
Rim Hole Number | 5 -Hole |
Type | Brake Disc Rotor |
Weight | 8.508 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.572 kg |
Material | Plastic |
Type | Expansion Tank, coolant |
Function | Expansion Tank, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.706 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 284 mm |
Width | 48 mm |
Material | Rubber/Metal |
Thickness | 48 mm |
Inner diameter | 17 mm |
Type | Link/Coupling Rod, stabiliser bar |
Function | Link/Coupling Rod, stabiliser bar |
Rod/Strut | Coupling Rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Rim Hole Number | 4 -Hole |
Placement on Vehicle | Front Axle |
Outer diameter | 284 mm |
Thickness | 39.4 mm |
Brake Disc Thickness | 22 mm |
Minimum thickness | 20.2 mm |
Bolt Hole Circle Diameter | 98 mm |
Centering Diameter | 59 mm |
Surface | Coated |
Function | Brake Disc |
Weight | 6.2 kg |
Type | Brake Disc Rotor |
Rotor Style | Internally Vented |
for OE number | 46427947 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023