Proud to be a UK-based company
Contact us
Important compatibility info
| Length | 215 mm |
| Height | 24 mm |
| Width | 105 mm |
| Number of mounting bores | 6 |
| Mounting points diameter | 9.2 mm |
| Function | Thermostat Housing |
| Additional Information | with gasket/seal |
| Weight | 0.415 kg |
| Type | Thermostat Housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Thermostat Housing (104963)
- 1x Febi Gasket, thermostat housing (107781)
£58.20
Important compatibility info
| Type | Brake Caliper |
| Placement on Vehicle | Rear Axle Left |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 179491 |
| Weight | 1.462 kg |
| Function | Brake Caliper |
| Brake caliper piston diameter | 34 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.20
Important compatibility info
| Weight | 3.5 kg |
| Placement on Vehicle | Rear Axle Right |
| Length | 222 mm |
| Operating Mode | Automatic |
| Paired article numbers | 35110 |
| Function | Adjuster, braking system |
| Hole Spacing | 160 mm |
| Type | Adjuster, braking system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.20
Important compatibility info
| Operating Mode | Automatic |
| Paired article numbers | 31592 |
| Function | Adjuster, braking system |
| Placement on Vehicle | Right |
| Weight | 3.3 kg |
| Type | Adjuster, braking system |
| Replaces | 20204 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.20
Important compatibility info
| Function | Adjuster, braking system |
| Paired article numbers | 31605 |
| Placement on Vehicle | Left |
| Operating Mode | Automatic |
| Weight | 3.1 kg |
| Additional Information 2 | Self-adjusting |
| Type | Adjuster, braking system |
| Replaces | 20205; 31585 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.20
Important compatibility info
| Type | Brake Caliper |
| Placement on Vehicle | Rear Axle Right |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 179489 |
| Weight | 1.462 kg |
| Function | Brake Caliper |
| Brake caliper piston diameter | 34 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.20
Important compatibility info
| Placement on Vehicle | Right |
| Operating Mode | Automatic |
| Paired article numbers | 31613 |
| Function | Adjuster, braking system |
| Additional Information 2 | Self-adjusting |
| Type | Adjuster, braking system |
| Weight | 3.00 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.20
Important compatibility info
| Operating Mode | Automatic |
| Weight | 3.42 kg |
| Placement on Vehicle | both sides |
| Function | Adjuster, braking system |
| Type | Adjuster, braking system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.20
Important compatibility info
| Operating Mode | Automatic |
| Paired article numbers | 31604 |
| Function | Adjuster, braking system |
| Placement on Vehicle | Right |
| Weight | 3.0 kg |
| Type | Adjuster, braking system |
| Additional Information 2 | Self-adjusting |
| Replaces | 20206 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.20
Important compatibility info
| Placement on Vehicle | Left, Rear Axle |
| Operating Mode | Automatic |
| Function | Adjuster, braking system |
| Type | Adjuster, braking system |
| Weight | 3.528 kg |
| Paired article numbers | 178441 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.20
Important compatibility info
| Paired article numbers | 31606 |
| Function | Adjuster, braking system |
| Weight | 3.2 kg |
| Placement on Vehicle | Right |
| Operating Mode | Automatic |
| Replaces | 20207; 31620 |
| Additional Information 2 | Self-adjusting |
| Type | Adjuster, braking system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.20
Important compatibility info
| Function | Adjuster, braking system |
| Type | Adjuster, braking system |
| Operating Mode | Automatic |
| Paired article numbers | 175153 |
| Placement on Vehicle | Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.20
Important compatibility info
| Weight | 3.01 kg |
| Additional Information 2 | Self-adjusting |
| Placement on Vehicle | Right |
| Operating Mode | Automatic |
| Type | Adjuster, braking system |
| Function | Adjuster, braking system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.20
Important compatibility info
| Additional Information 2 | with ball joint, with rubber mount |
| Weight | 1.25 kg |
| Steering arm type | Control Arm |
| Placement on Vehicle | Upper, Front Axle Left, Front Axle Right |
| Material | Aluminium |
| Cone Size | 21 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.20
Important compatibility info
| Weight | 3.1 kg |
| Additional Information 2 | Self-adjusting |
| Placement on Vehicle | Left |
| Operating Mode | Automatic |
| Paired article numbers | 31609 |
| Type | Adjuster, braking system |
| Function | Adjuster, braking system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.20
Important compatibility info
| Placement on Vehicle | Front and Rear, both sides |
| Weight | 0.43 kg |
| Type | Air Suspension Valve |
| Function | Air Suspension Valve |
| Replaces | 15496 |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Air Suspension Valve (23563)
- 1x Febi Mounting Set, driver cab suspension valve (29313)
£58.20
Important compatibility info
| Placement on Vehicle | Rear Axle Right |
| Length | 255 mm |
| Operating Mode | Automatic |
| Paired article numbers | 35107 |
| Function | Adjuster, braking system |
| Type | Adjuster, braking system |
| Weight | 3.5 kg |
| Hole Spacing | 160 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.20
Important compatibility info
| Placement on Vehicle | Left |
| Operating Mode | Automatic |
| Paired article numbers | 31617 |
| Function | Adjuster, braking system |
| Additional Information 2 | Self-adjusting |
| Type | Adjuster, braking system |
| Weight | 3.13 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.20
Important compatibility info
| Placement on Vehicle | Rear Axle Right |
| Weight | 3.4 kg |
| Paired article numbers | 31580 |
| Function | Adjuster, braking system |
| Operating Mode | Automatic |
| Type | Adjuster, braking system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.20
Important compatibility info
| Weight | 3.5 kg |
| Type | Adjuster, braking system |
| Length | 225 mm |
| Operating Mode | Automatic |
| Placement on Vehicle | Left |
| Hole Spacing | 160 mm |
| Paired article numbers | 35120 |
| Function | Adjuster, braking system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.20
Important compatibility info
| Weight | 0.16 kg |
| Thread Length | 12 mm |
| Number of Connectors / Ports | 3 |
| Function | Sensor, oil pressure |
| Switch point from | 0.1 bar |
| Switch point to | 0.4 bar |
| External Thread Size | M18 x 1,5 |
| Type | Sensor, oil pressure |
| for OE number | 81.27421.0109 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.20
Important compatibility info
| Weight | 3.02 kg |
| Placement on Vehicle | Right |
| Operating Mode | Automatic |
| Paired article numbers | 31614 |
| Function | Adjuster, braking system |
| Type | Adjuster, braking system |
| Additional Information 2 | Self-adjusting |
| Replaces | 31594 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.20
Important compatibility info
| Paired article numbers | 31598 |
| Function | Adjuster, braking system |
| Placement on Vehicle | Left |
| Weight | 3.5 kg |
| Type | Adjuster, braking system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.20
Important compatibility info
| Paired article numbers | 35122 |
| Function | Adjuster, braking system |
| Weight | 3.5 kg |
| Placement on Vehicle | Rear Axle Right |
| Length | 229 mm |
| Operating Mode | Automatic |
| Type | Adjuster, braking system |
| Hole Spacing | 165 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.20
Important compatibility info
| Operating Mode | Automatic |
| Length | 234 mm |
| Placement on Vehicle | Front Axle Left |
| Function | Adjuster, braking system |
| Paired article numbers | 35118 |
| Weight | 3.503 kg |
| Type | Adjuster, braking system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.20
Important compatibility info
| Type | Control/Trailing Arm, wheel suspension |
| Cone Size | 20 mm |
| Weight | 1.632 kg |
| Paired article numbers | 183616 |
| Function | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
| Placement on Vehicle | Rear, Front Axle Left, Lower |
| Additional Information | with rubber-metal mounts |
| Material | Aluminium |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.20
Important compatibility info
| Weight | 0.420 kg |
| External Thread Size | M6 x 1, M26 x 1,5 |
| Internal Thread Size | M12 x 1,5 |
| Function | Breather Valve |
| Type | Breather Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.20
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Length | 720 mm |
| Rod/Strut | Guide Rod |
| Cone Size | 30 mm |
| Pipe Diameter | 36 mm |
| Function | Centre Rod Assembly |
| Weight | 7.0 kg |
| Driver Position | for left-hand/right-hand drive vehicles |
| Extra Description | ProKit |
| Internal Thread Size | M30 x 1,5 RHT |
| External Thread Size | M24 x 1,5 |
| Type | Centre Rod Assembly |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.20
Important compatibility info
| Weight | 0.52 kg |
| Outer diameter | 44 mm |
| Length | 180 mm |
| Type | Slave Cylinder, engine brake |
| Function | Slave Cylinder, engine brake |
| External Thread Size | M8 x 1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.20
Important compatibility info
| Weight | 3.4 kg |
| Operating Mode | Automatic |
| Paired article numbers | 31579 |
| Type | Adjuster, braking system |
| Function | Adjuster, braking system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.20
Important compatibility info
| Width of castor bearing surface | 38 mm |
| Operating Mode | Automatic |
| Weight | 1.350 kg |
| Outer diameter | 70 mm |
| Width | 100 mm |
| Material | Metal |
| Type | Belt Tensioner, V-ribbed belt |
| Function | Belt Tensioner, V-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.20
Important compatibility info
| Weight | 0.93 kg |
| Length | 800 mm |
| Width | 250 mm |
| Material | Rubber |
| Thickness | 30 mm |
| Function | Gasket, oil sump |
| Type | Gasket, oil sump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.20
Important compatibility info
| Material | Aluminium |
| Steering arm type | Control Arm |
| Paired article numbers | 21439 |
| Weight | 1.646 kg |
| Placement on Vehicle | Front Axle Right, Lower, Front |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint, with bearing |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Mounting, control/trailing arm (21219)
£58.20
Important compatibility info
| Weight | 1.387 kg |
| Seal Material | Paper |
| Water pump impeller material | Metal |
| Function | Water Pump, engine cooling |
| Number of Wings | 4 |
| Additional Information | with gasket/seal |
| Type | Water Pump, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.21
Important compatibility info
| Brake Disc Thickness | 28 mm |
| Rim Hole Number | 5 -Hole |
| Function | Brake Disc |
| Type | Brake Disc Rotor |
| Number of mounting bores | 2 |
| Weight | 7.540 kg |
| Surface | Coated |
| Centering Diameter | 62 mm |
| Bolt Hole Circle Diameter | 114.3 mm |
| Minimum thickness | 26 mm |
| Inner diameter | 62 mm |
| Thickness | 49.5 mm |
| Outer diameter | 275 mm |
| Placement on Vehicle | Front Axle |
| Rotor Style | Internally Vented |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.21
Important compatibility info
| Weight | 7.330 kg |
| Bolt Hole Circle Diameter | 114.3 mm |
| Brake Disc Thickness | 24 mm |
| Minimum thickness | 22.7 mm |
| Function | Brake Disc |
| Rim Hole Number | 5 -Hole |
| Type | Brake Disc Rotor |
| Surface | Coated |
| Centering Diameter | 72 mm |
| for OE number | 05016434AA |
| Thickness | 77.5 mm |
| Outer diameter | 280 mm |
| Placement on Vehicle | Front Axle |
| Rotor Style | Internally Vented |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.21
Important compatibility info
| Rotor Style | Internally Vented |
| Rim Hole Number | 6 -Hole |
| Placement on Vehicle | Front Axle |
| Outer diameter | 290 mm |
| Thickness | 53 mm |
| Brake Disc Thickness | 26 mm |
| Minimum thickness | 23 mm |
| Bolt Hole Circle Diameter | 118 mm |
| Centering Diameter | 96 mm |
| Surface | Coated |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
| Weight | 8.2 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.21
Important compatibility info
| Weight | 0.516 kg |
| Placement on Vehicle | Rear |
| Length | 136 mm |
| Width | 72 mm |
| Thickness | 69 mm |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.21
Important compatibility info
| Weight | 1.690 kg |
| Placement on Vehicle | Right |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.21
Important compatibility info
| Placement on Vehicle | Left |
| Number of Connectors / Ports | 2 |
| Weight | 0.121 kg |
| Type | Control Valve, camshaft adjustment |
| Function | Control Valve, camshaft adjustment |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.21
Important compatibility info
| Rotor Style | Internally Vented |
| Rim Hole Number | 4 -Hole |
| Placement on Vehicle | Front Axle |
| Outer diameter | 280 mm |
| Thickness | 56.3 mm |
| Brake Disc Thickness | 22 mm |
| Minimum thickness | 20 mm |
| Bolt Hole Circle Diameter | 108 mm |
| Centering Diameter | 68 mm |
| Surface | Coated |
| Function | Brake Disc |
| Weight | 5.765 kg |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.21
Important compatibility info
| Weight | 5.67 kg |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 300 mm |
| Thickness | 68.5 mm |
| Brake Disc Thickness | 12 mm |
| Bolt Hole Circle Diameter | 120 mm |
| Surface | Coated |
| Function | Brake Disc |
| Rotor Style | Solid |
| Rim Hole Number | 5 -Hole |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.21
Important compatibility info
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Placement on Vehicle | Rear, both sides |
| External Thread Size | M16 x 1,5 |
| Type | Mounting, engine |
| Weight | 3.770 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.21
Important compatibility info
| Weight | 6.3 kg |
| Rim Hole Number | 5 -Hole |
| Placement on Vehicle | Front Axle |
| Outer diameter | 302 mm |
| Thickness | 77 mm |
| Brake Disc Thickness | 12 mm |
| Minimum thickness | 10.4 mm |
| Bolt Hole Circle Diameter | 120 mm |
| Centering Diameter | 79 mm |
| Surface | Coated |
| Number of mounting bores | 2 |
| Function | Brake Disc |
| Rotor Style | Solid |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.21
Important compatibility info
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Weight | 1.102 kg |
| Type | Mounting, engine |
| Replaces | 17962 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.21
Important compatibility info
| Placement on Vehicle | Front Axle Right, Lower, outer |
| Additional Information | with rubber mounts |
| Material | Sheet Steel |
| Additional Information 2 | with ball joint |
| Steering arm type | Control Arm |
| Paired article numbers | 193702 |
| Weight | 2.302 kg |
| Cone Size | 18 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.22
Important compatibility info
| Additional Information 2 | with ball joint |
| Placement on Vehicle | Front Axle Left, Lower, outer |
| Material | Sheet Steel |
| Additional Information | with rubber mounts |
| Steering arm type | Control Arm |
| Paired article numbers | 193701 |
| Weight | 0.302 kg |
| Cone Size | 18 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.22
Important compatibility info
| Weight | 0.081 kg |
| Type | Sensor, exhaust gas temperature |
| Cable Length | 970 mm |
| Number of Connectors / Ports | 2 |
| External Thread Size | M14 x 1,5 |
| Function | Sensor, exhaust gas temperature |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.22
Important compatibility info
| Rotor Style | Internally Vented |
| Weight | 9.15 kg |
| Placement on Vehicle | Front Axle |
| Rim Hole Number | 5 -Hole |
| Outer diameter | 300 mm |
| Thickness | 56.3 mm |
| Function | Brake Disc |
| Number of mounting bores | 1 |
| Surface | Coated |
| Centering Diameter | 68 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Minimum thickness | 22 mm |
| Brake Disc Thickness | 26 mm |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.22
Important compatibility info
| Voltage | 10.1 V |
| Number of Connectors / Ports | 2 |
| Function | Interior Blower |
| Type | Interior Blower |
| Weight | 1.17 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.23
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023