Important compatibility info
Weight | 0.577 kg |
Number of Ribs | 5 |
Tightening Torque | 85 Nm |
Function | Alternator Freewheel Clutch |
Additional Information 2 | with lid |
Type | Alternator Freewheel Clutch |
Width | 39 mm |
Outer diameter | 63 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Operating Mode | Automatic |
Paired article numbers | 48606 |
Function | Adjuster, braking system |
Placement on Vehicle | Rear Axle Right |
Weight | 3.5 kg |
Type | Adjuster, braking system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.61 kg |
Placement on Vehicle | Front Axle Right, Lower, Rear |
Material | Aluminium |
Steering arm type | Control Arm |
Paired article numbers | 43741 |
Outer diameter | 65 mm |
Function | Control/Trailing Arm, wheel suspension |
External Thread Size | M14 x 1,5 |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with ball joint, with bearing |
Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (43734)
- 1x Febi Nut (43739)
Important compatibility info
Additional Information | with seal rings |
Weight | 1.2 kg |
Material | Cast Aluminium |
Number of Wings | 6 |
Function | Water Pump, engine cooling |
Water pump impeller material | Metal |
Seal Material | Rubber |
Type | Water Pump, engine cooling |
Housing Type | without housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Paired article numbers | 35122 |
Function | Adjuster, braking system |
Weight | 3.5 kg |
Placement on Vehicle | Rear Axle Right |
Length | 229 mm |
Operating Mode | Automatic |
Type | Adjuster, braking system |
Hole Spacing | 165 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Operating Mode | Automatic |
Length | 234 mm |
Placement on Vehicle | Front Axle Left |
Function | Adjuster, braking system |
Paired article numbers | 35118 |
Weight | 3.503 kg |
Type | Adjuster, braking system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | with cable |
Placement on Vehicle | Front |
Voltage | 12 V |
Number of Connectors / Ports | 4 |
Function | Wiper Motor |
Driver Position | for right-hand drive vehicles |
Weight | 1.250 kg |
Type | Wiper Motor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 5.560 kg |
Cone Size | 26 mm |
Placement on Vehicle | Front Axle |
Adjustable | Adjustable on one side |
Length | 865 mm |
Thread Size | M20 x 1,5 |
Rod/Strut | Push Rod |
Type | Centre Rod Assembly |
Function | Centre Rod Assembly |
Extra Description | ProKit |
Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 3.5 kg |
Placement on Vehicle | Rear Axle Left |
Length | 227 mm |
Operating Mode | Automatic |
Paired article numbers | 35123 |
Function | Adjuster, braking system |
Type | Adjuster, braking system |
Hole Spacing | 165 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.160 kg |
External Thread Size | M14 x 1,5 |
Placement on Vehicle | Rear Axle Left, Rear, Upper |
Material | Aluminium |
Inner diameter | 12 mm |
Steering arm type | Control Arm |
Paired article numbers | 37444 |
Function | Control/Trailing Arm, wheel suspension |
Additional Information | with lock nut |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with bearing, with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (37445)
Important compatibility info
Material | CR (chloroprene rubber) |
Weight | 0.963 kg |
Outer diameter | 106 mm |
Inner diameter | 100 mm |
Type | Charge Air Hose |
Function | Charge Air Hose |
Extra Description | ProKit |
Additional Information 2 | with clamps |
Hose Length | 270 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Charge Air Hose (46463)
- 2x Febi Fastening Clamp, charge air hose (39028)
Important compatibility info
Placement on Vehicle | Left |
Operating Mode | Automatic |
Paired article numbers | 170387 |
Function | Adjuster, braking system |
Type | Adjuster, braking system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Operating Mode | Automatic |
Weight | 3.2 kg |
Placement on Vehicle | both sides |
Function | Adjuster, braking system |
Type | Adjuster, braking system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Right, Lower |
Material | Sheet Steel |
Steering arm type | Control Arm |
Paired article numbers | 41052 |
Function | Control/Trailing Arm, wheel suspension |
Weight | 3.77 kg |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with rubber mount, with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.724 kg |
Internal Thread Size | M12 x 1,5 |
Placement on Vehicle | Rear Axle |
Outer diameter | 145 mm. 45 mm |
Thickness | 67 mm |
Number of Holes | 6 |
Number of Teeth | 30 |
Function | Wheel Hub |
Type | Wheel Hub |
Additional Information 2 | without wheel bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with oil drain plug |
Length | 430 mm |
Extra Description | febi Plus |
Additional Information 2 | with bore for oil-level sensor, with seal ring |
External Thread Size | M14 x 1,5 |
Function | Oil sump |
Weight | 1.8 kg |
Wet Sump Material | Cast Aluminium |
Type | Oil sump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Seal Material | Rubber |
Type | Water Pump, engine cooling |
Weight | 1.078 kg |
Number of Wings | 7 |
Water pump impeller material | Metal |
Function | Water Pump, engine cooling |
Housing material | Metal |
Additional Information | with gasket/seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 3.4 kg |
Operating Mode | Automatic |
Paired article numbers | 31579 |
Type | Adjuster, braking system |
Function | Adjuster, braking system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 3.1 kg |
Additional Information 2 | Self-adjusting |
Placement on Vehicle | Left |
Operating Mode | Automatic |
Paired article numbers | 31609 |
Type | Adjuster, braking system |
Function | Adjuster, braking system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Right |
Operating Mode | Automatic |
Paired article numbers | 170386 |
Function | Adjuster, braking system |
Type | Adjuster, braking system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with gaskets/seals |
Material | Cast Aluminium |
Weight | 2.460 kg |
Type | Water Pump, engine cooling |
Function | Water Pump, engine cooling |
Water pump impeller material | Metal |
Seal Material | Paper |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 3.22 kg |
Operating Mode | Automatic |
Placement on Vehicle | both sides |
Function | Adjuster, braking system |
Type | Adjuster, braking system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | with ball joint, with rubber mount |
Weight | 1.25 kg |
Steering arm type | Control Arm |
Placement on Vehicle | Upper, Front Axle Left, Front Axle Right |
Material | Aluminium |
Cone Size | 21 mm |
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Left |
Operating Mode | Automatic |
Paired article numbers | 31581 |
Weight | 3.6 kg |
Function | Adjuster, braking system |
Type | Adjuster, braking system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M12 x 1,25 |
Weight | 4.035 kg |
Placement on Vehicle | Front Axle Left, Lower |
Material | Sheet Steel |
Steering arm type | Control Arm |
Paired article numbers | 174229 |
Cone Size | 18 mm |
Function | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with ball joint |
Type | Control/Trailing Arm, wheel suspension |
Additional Information | with lock nut, with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Connectors / Ports | 2 |
Weight | 1.4 kg |
Rated Power | 181 W |
Function | Interior Blower |
Type | Interior Blower |
Voltage | 12 V |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Adjuster, braking system |
Placement on Vehicle | Right |
Operating Mode | Automatic |
Paired article numbers | 31587 |
Weight | 3.2 kg |
Type | Adjuster, braking system |
Replaces | 20201 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | Self-adjusting |
Placement on Vehicle | Right |
Operating Mode | Automatic |
Paired article numbers | 31608 |
Function | Adjuster, braking system |
Type | Adjuster, braking system |
Weight | 3.2 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Cast Steel |
Placement on Vehicle | Front Axle Left, Lower, Rear |
Steering arm type | Control Arm |
Paired article numbers | 40822 |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Mounting, control/trailing arm (36082)
Important compatibility info
Shock Absorber Mounting Type | Top eye, Bottom Pin |
Pipe Diameter | 41 mm |
Function | Shock Absorber, driver cab suspension |
Type | Shock Absorber, driver cab suspension |
Piston conrod diameter | 12 mm |
Mounting points diameter | 14 mm |
Min. Length | 221 mm |
Max. Length | 336 mm |
Weight | 1.7 kg |
Operating Mode | Mechanical |
Placement on Vehicle | Front |
External Thread Size | M12 x 1,75 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 3.24 kg |
Placement on Vehicle | Right, Rear Axle |
Operating Mode | Automatic |
Paired article numbers | 31616 |
Function | Adjuster, braking system |
Additional Information 2 | Self-adjusting |
Type | Adjuster, braking system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Right |
Length | 255 mm |
Operating Mode | Automatic |
Paired article numbers | 35107 |
Function | Adjuster, braking system |
Type | Adjuster, braking system |
Weight | 3.5 kg |
Hole Spacing | 160 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Auxiliary water pump (cooling water circuit) |
Type | Auxiliary water pump (cooling water circuit) |
Voltage | 12 V |
Number of Connectors / Ports | 2 |
Weight | 0.42 kg |
for OE number | 8E0 261 431 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Belt Tensioner, V-ribbed belt |
Material | Metal |
Width of castor bearing surface | 46 mm |
Type | Belt Tensioner, V-ribbed belt |
Weight | 2.036 kg |
Operating Mode | Automatic |
Outer diameter | 74 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Upper Left |
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Cooling Hose | from thermostat to radiator |
Function | Radiator Hose |
Weight | 0.525 kg |
Additional Information 2 | with quick couplers |
Type | Radiator Hose |
Hose Length | 490.8 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Paired article numbers | 31597 |
Function | Adjuster, braking system |
Weight | 3.6 kg |
Operating Mode | Automatic |
Placement on Vehicle | Rear Axle Right |
Type | Adjuster, braking system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Connectors / Ports | 3. 2 |
Function | Pressure converter, turbocharger |
Operating Mode | Electric-pneumatic |
Weight | 0.200 kg |
Extra Description | febi Plus |
Type | Pressure converter, turbocharger |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.58 kg |
Housing Diameter | 55 mm |
Function | Slave Cylinder, engine brake |
Pressure side external thread size | M10 x 1,5 |
Housing length | 181.5 mm |
Pressure side internal thread size | M12 x 1,5 |
Type | Slave Cylinder, engine brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Surface | PTFE (Polytetrafluorethylene) coated |
Width | 18 mm |
Number of Teeth | 121 |
Type | Water Pump & Timing Belt Kit |
Function | Water Pump & Timing Belt Kit |
Weight | 2.77 kg |
for OE number | 051 198 119 S3 |
Belts | with trapezoidal tooth profile |
Housing Type | with housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Water Pump, engine cooling (01287)
- 1x Febi Timing Belt Kit (14574)
Important compatibility info
Weight | 0.07 kg |
Spanner Size | 17 |
Number of Connectors / Ports | 2 |
Cable Length | 475 mm |
Function | Sensor, exhaust gas temperature |
External Thread Size | M14 x 1,5 |
Type | Sensor, exhaust gas temperature |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Width | 162 mm |
Outer diameter | 99 mm |
Thickness | 100 mm |
Inner diameter | 26 mm |
Weight | 5.258 kg |
Hole Pitch 1/ Hole Pitch 2 | 85/60 |
Type | Stop- /Mounting Buffer |
Function | Stop- /Mounting Buffer |
Additional Information | with holder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.408 kg |
Bearing/Mounting Type | Rubber-Metal Mount |
Function | Mounting, manual transmission |
Type | Mounting, manual transmission |
Paired article numbers | 183678 |
Placement on Vehicle | Lower Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 8.6 kg |
Placement on Vehicle | Front Axle |
Outer diameter | 312 mm |
Thickness | 49.7 mm |
Brake Disc Thickness | 25 mm |
Minimum thickness | 22 mm |
Bolt Hole Circle Diameter | 112 mm |
Centering Diameter | 65 mm |
Surface | Coated |
Number of mounting bores | 1 |
Function | Brake Disc |
Rim Hole Number | 5 -Hole |
Rotor Style | Internally Vented |
Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.0 kg |
Type | Mounting Kit, charger |
Function | Mounting Kit, charger |
for turbocharger (art. no.) | 186662 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with gasket/seal |
Weight | 0.552 kg |
Type | Thermostat Housing |
Function | Thermostat Housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front, before catalytic converter |
Spanner Size | 22 |
Weight | 0.127 kg |
Cable Length | 900 mm |
Number of circuits | 4 |
Lambda Sensor | Heated |
Type | Oxygen Sensor |
Function | Oxygen Sensor |
External Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.38 kg |
Inner diameter | 35 mm |
Function | Suspension, propshaft |
Type | Suspension, propshaft |
Additional Information 2 | with ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension, propshaft (21325)
- 1x Febi Bearing, propshaft centre bearing (21311)
Important compatibility info
Additional Information 2 | with quick couplers |
Function | Radiator Hose |
Type | Radiator Hose |
Cooling Hose | from radiator to water pipe |
Weight | 0.563 kg |
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 3.800 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Width | 39 mm |
Outer diameter | 90 mm |
Inner diameter | 33 mm |
Number of Holes | 5 |
Bolt Hole Circle Diameter | 105 mm |
Sealing lip material | NBR (nitrile butadiene rubber) |
Function | Wheel Bearing Kit |
Bearing Type | Angular Ball Bearing |
Type | Wheel Bearing Kit |
Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated ABS sensor |
Outer diameter 1 | 65 mm |
Outer diameter 2 | 137 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Spanner Size | 22 |
Weight | 0.098 kg |
Cable Length | 504 mm |
Number of circuits | 4 |
Lambda Sensor | Heated |
Type | Oxygen Sensor |
Function | Oxygen Sensor |
External Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023