Proud to be a UK-based company
Contact us
Important compatibility info
| External Thread Size | M16 x 1,5 |
| Rims | for light alloy rims, for steel rims |
| Screw length below head | 29 mm |
| Bolt Head/Nut Design | Male Hex |
| Material | Steel |
| Function | Wheel Bolt |
| Wheel Fastening | Conical Seat F |
| Quality/ Grade | 10.9 |
| Thread Length | 25 mm |
| Spanner Size | 21 |
| Length | 64 mm |
| Placement on Vehicle | Front Axle, Rear Axle |
| Weight | 0.15 kg |
| Type | Wheel Bolt |
| Outer diameter | 32 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£6.23
Important compatibility info
| Function | Suspension Spring |
| Placement on Vehicle | Rear Axle |
| Length | 400 mm |
| Outer diameter | 126 mm |
| Weight | 1.59 kg |
| Type | Suspension Spring |
| Wire Diameter | 10.8 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£27.09
Important compatibility info
| Friction Lining Material | Plastic |
| Weight | 0.120 kg |
| Placement on Vehicle | Rear |
| Function | Guide, timing chain |
| Engine Management | Timing Chain |
| Type | Guide, timing chain |
| Material | Plastic |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£11.57
Important compatibility info
| Function | Gas Spring, air deflector |
| Length | 145.5 mm |
| Mounting points diameter | 6.3 mm |
| Housing Diameter | 15 mm |
| Weight | 0.6 kg |
| Stroke | 40 mm |
| Eject Force | 400 N |
| Piston conrod diameter | 6 mm |
| Type | Gas Spring, air deflector |
| Housing length | 82 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£15.63
Important compatibility info
| Weight | 0.223 kg |
| Placement on Vehicle | Wheel Side, Rear Axle |
| Material | Rubber |
| Function | Bellow Kit, drive shaft |
| Inner diameter 2 | 57 mm |
| Inner diameter 1 | 25 mm |
| Length | 70 mm |
| Type | Bellow Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bellow Kit, drive shaft (36557)
- 1x Febi High Temperature Lubricant (03630)
£14.06
Important compatibility info
| Belts | with trapezoidal tooth profile |
| Function | Timing Belt |
| Surface | PTFE (Polytetrafluorethylene) coated |
| Width | 16 mm |
| Number of Teeth | 118 |
| Weight | 0.1 kg |
| Type | Timing Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£37.95
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Weight | 0.356 kg |
| Type | Dust Cover Kit, shock absorber |
| Function | Dust Cover Kit, shock absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£21.88
Important compatibility info
| Material | Rubber/Metal |
| Weight | 0.255 kg |
| Function | Mount, exhaust system |
| Type | Mount, exhaust system |
| Placement on Vehicle | Rear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.46
Important compatibility info
| Height | 315 mm |
| Outer diameter | 173 mm |
| Inner diameter | 88 mm |
| Filter type | Pollen Filter |
| Weight | 0.85 kg |
| Type | Filter, cabin air |
| Function | Filter, cabin air |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£18.88
Important compatibility info
| Function | Screw Plug, oil sump |
| Thread Length | 18 mm |
| Bolt Head/Nut Design | Male Hex |
| Surface | Phosphatized |
| Spanner Size | 17 |
| Material | Steel |
| Length | 23 mm |
| External Thread Size | M18 x 1,5 |
| Screw length below head | 18 mm |
| Type | Screw Plug, oil sump |
| Additional Information 2 | without seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£5.71
Important compatibility info
| Weight | 0.4 kg |
| Width | 36 mm |
| Outer diameter | 50 mm |
| Thickness | 180 mm |
| Inner diameter | 35 mm |
| Function | Suspension, propshaft |
| Type | Suspension, propshaft |
| Additional Information 2 | with rolling bearing |
| Bearing Type | Rolling Bearing |
| Hole Spacing | 160 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£136.31
Important compatibility info
| Number of Connectors / Ports | 2 |
| Function | Sensor, exhaust gas temperature |
| Cable Length | 270 mm |
| Weight | 0.07 kg |
| Placement on Vehicle | after soot particulate filter |
| Spanner Size | 17 |
| Type | Sensor, exhaust gas temperature |
| External Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£50.53
Important compatibility info
| Seal Diameter | 72.8 mm |
| Type | Oil Filter |
| Function | Oil Filter |
| Filter type | Filter Insert |
| Inner diameter | 31 mm |
| Outer diameter | 64 mm |
| Seal Material | NBR (nitrile butadiene rubber) |
| Weight | 0.05 kg |
| Additional Information | with gaskets/seals |
| Height | 135 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£7.60
Important compatibility info
| Type | Starter |
| Weight | 2.989 kg |
| Function | Starter |
| Rated Power | 1.1 kW |
| Number of Teeth | 10 |
| Voltage | 12 V |
| for OE number | 02T 911 024 N |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£77.96
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 312 mm |
| Material | Steel |
| Rod/Strut | Coupling Rod |
| Outer diameter | 8 mm |
| Thread Length | 29.7 mm |
| Function | Link/Coupling Rod, stabiliser bar |
| External Thread Size | M12 x 1,25 |
| Weight | 0.405 kg |
| Extra Description | ProKit |
| Type | Link/Coupling Rod, stabiliser bar |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£20.47
Important compatibility info
| Placement on Vehicle | Front, both sides |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
| Weight | 0.72 kg |
| for OE number | 11270-BM500 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£30.19
Important compatibility info
| Outer diameter | 138 mm |
| Thickness | 44.5 mm |
| Inner diameter | 25 mm |
| Number of Ribs | 5 |
| Parameter | 6PK |
| Function | Belt Pulley, crankshaft |
| Weight | 1.47 kg |
| Type | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£56.59
Important compatibility info
| Length | 78 mm |
| Voltage | 24 V |
| Spanner Size | 27 |
| Number of Connectors / Ports | 4 |
| Function | Sensor, speed |
| Screw length below head | 20 mm |
| External Thread Size | M18 x 1,5 |
| Type | Sensor, speed |
| Weight | 0.084 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£25.39
Important compatibility info
| Function | Clutch, radiator fan |
| Weight | 1.157 kg |
| Type | Clutch, radiator fan |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£136.36
Important compatibility info
| Length | 240 mm |
| Valve stem diameter | 9.470 mm |
| Valve head diameter | 42.45 mm |
| Weight | 0.183 kg |
| Notches / Holes Number | 1 |
| Type | Intake Valve |
| Function | Intake Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£36.22
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023