Proud to be a UK-based company
Contact us
Important compatibility info
| Length | 215 mm |
| Height | 24 mm |
| Width | 105 mm |
| Number of mounting bores | 6 |
| Mounting points diameter | 9.2 mm |
| Function | Thermostat Housing |
| Additional Information | with gasket/seal |
| Weight | 0.415 kg |
| Type | Thermostat Housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Thermostat Housing (104963)
- 1x Febi Gasket, thermostat housing (107781)
£58.20
Important compatibility info
| Number of Connectors / Ports | 2 |
| Type | Sensor, exhaust gas temperature |
| Weight | 0.08 kg |
| Function | Sensor, exhaust gas temperature |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.20
Important compatibility info
| Placement on Vehicle | Front |
| Operating Mode | Mechanical |
| Weight | 3.5 kg |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Min. Length | 282 mm |
| Pipe Diameter | 38 mm |
| Mounting points diameter | 25 mm. 14 mm |
| Piston conrod diameter | 13 mm |
| Type | Shock Absorber, driver cab suspension |
| Function | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.20
Important compatibility info
| Paired article numbers | 38171 |
| Cone Size | 20 mm |
| Weight | 3.5 kg |
| Function | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
| Material | Sheet Steel |
| Placement on Vehicle | Front Axle Left, Lower |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.20
Important compatibility info
| Additional Information | with nuts |
| Function | Tie Rod |
| Type | Tie Rod |
| Weight | 1.37 kg |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 385 mm |
| Additional Information 2 | with clamps, with seal ring, with steering bellow |
| Spanner Size | 38 |
| Extra Description | ProKit |
| External Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Tie Rod End (27067)
- 1x Febi Inner Tie Rod (31222)
- 1x Febi Clamping piece, tie rod (31223)
- 1x Febi Clamping Clip (38756)
- 1x Febi Bellow, steering (22631)
- 1x Febi Clamping Clip (38764)
- 1x Febi Gasket, steering gear (22632)
£58.20
Important compatibility info
| Additional Information | with adjuster |
| Weight | 0.40 kg |
| Type | Tailgate Lock |
| Function | Tailgate Lock |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.20
Important compatibility info
| Weight | 0.984 kg |
| Placement on Vehicle | Front |
| Bolt Hole Circle Diameter | 90 mm |
| Function | Joint, propshaft |
| Additional Information | with nuts |
| Outer diameter | 140 mm |
| Thickness | 24 mm |
| Additional Information 2 | with bolts/screws, with washers |
| Inner diameter | 41 mm |
| Extra Description | ProKit |
| Type | Joint, propshaft |
| Number of Holes | 6 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 3x Febi Screw (03931)
- 3x Febi Bolt, drive shaft flange (03934)
- 1x Febi Assembly Kit, propshaft joint (22117)
£58.20
Important compatibility info
| External Thread Size | M10 x 1,25 |
| Placement on Vehicle | Front |
| Operating Mode | Mechanical |
| Shock Absorber Mounting Type | Top pin, Bottom eye |
| Max. Length | 258 mm |
| Min. Length | 203 mm |
| Pipe Diameter | 49 mm. 60 mm |
| Mounting points diameter | 30 mm |
| Piston conrod diameter | 14 mm |
| Function | Shock Absorber, driver cab suspension |
| Weight | 2.0 kg |
| Type | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.20
Important compatibility info
| Additional Information | with gaskets/seals |
| Material | Cast Aluminium |
| Weight | 2.460 kg |
| Type | Water Pump, engine cooling |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Metal |
| Seal Material | Paper |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.20
Important compatibility info
| Additional Information 2 | with ball joint |
| Placement on Vehicle | Front Axle Left, Lower, outer |
| Material | Sheet Steel |
| Additional Information | with rubber mounts |
| Steering arm type | Control Arm |
| Paired article numbers | 193701 |
| Weight | 0.302 kg |
| Cone Size | 18 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.20
Important compatibility info
| Placement on Vehicle | Left Rear |
| Additional Information | with adjuster |
| Operating Mode | Electric |
| Paired article numbers | 192945 |
| Number of Connectors / Ports | 7 |
| Weight | 0.76 kg |
| Type | Door Lock |
| Function | Door Lock |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.20
Important compatibility info
| Weight | 0.52 kg |
| Outer diameter | 44 mm |
| Length | 180 mm |
| Type | Slave Cylinder, engine brake |
| Function | Slave Cylinder, engine brake |
| External Thread Size | M8 x 1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.20
Important compatibility info
| Weight | 4.650 kg |
| Width | 18.5 mm |
| Outer diameter | 485.5 mm |
| Inner diameter | 432 mm |
| Number of Teeth | 160 |
| Type | Ring Gear, flywheel |
| Function | Ring Gear, flywheel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.20
Important compatibility info
| External Teeth, Wheel Side | 36 |
| Thread Size | M16 x 1,5 |
| Additional Information 2 | with bolts/screws |
| Transmission-side joint diameter | 107.8 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
| Placement on Vehicle | Front Axle Right |
| Weight | 8.098 kg |
| Min. Length | 794 mm |
| Wheel Sided Joint Diameter | 90.9 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.20
Important compatibility info
| Placement on Vehicle | Right Rear |
| Additional Information | with adjuster |
| Operating Mode | Electric |
| Paired article numbers | 192944 |
| Number of Connectors / Ports | 7 |
| Weight | 0.76 kg |
| Type | Door Lock |
| Function | Door Lock |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.20
Important compatibility info
| Weight | 0.321 kg |
| Pressure | 5.9 bar |
| Function | Pressure Limiting Valve |
| Internal Thread Size | M22 x 1,5 |
| Type | Pressure Limiting Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.20
Important compatibility info
| Weight | 1.140 kg |
| External Thread Size | M12 x 1,25 |
| Length | 619 mm |
| Placement on Vehicle | Front Axle, Centre |
| Function | Tie Rod |
| Type | Tie Rod |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.20
Important compatibility info
| Track rollers material | Plastic |
| Outer diameter | 75 mm |
| Operating Mode | Mechanical |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Weight | 1.5 kg |
| Width of castor bearing surface | 33 mm |
| Type | Belt Tensioner, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.20
Important compatibility info
| Weight | 0.304 kg |
| for OE number | 996 107 026 01 |
| Type | Oil Separator, crankcase ventilation |
| Function | Oil Separator, crankcase ventilation |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.20
Important compatibility info
| Placement on Vehicle | Front and Rear, both sides |
| Weight | 0.43 kg |
| Type | Air Suspension Valve |
| Function | Air Suspension Valve |
| Replaces | 15496 |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Air Suspension Valve (23563)
- 1x Febi Mounting Set, driver cab suspension valve (29313)
£58.20
Important compatibility info
| Type | Brake Caliper |
| Placement on Vehicle | Rear Axle Left |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 179491 |
| Weight | 1.462 kg |
| Function | Brake Caliper |
| Brake caliper piston diameter | 34 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.20
Important compatibility info
| External Thread Size | M12 x 1,25 |
| Weight | 4.035 kg |
| Placement on Vehicle | Front Axle Right, Lower |
| Material | Sheet Steel |
| Additional Information 2 | with ball joint |
| Steering arm type | Control Arm |
| Paired article numbers | 174228 |
| Cone Size | 24 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information | with rubber mounts, with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.20
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Thread Size | M20x1,5 |
| External Teeth, Wheel Side | 25 |
| Weight | 6.381 kg |
| External Teeth, Diff.Side | 39 |
| Min. Length | 642 mm |
| Wheel Sided Joint Diameter | 84 mm |
| Transmission-side joint diameter | 82 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.20
Important compatibility info
| Width of castor bearing surface | 38 mm |
| Operating Mode | Automatic |
| Weight | 1.350 kg |
| Outer diameter | 70 mm |
| Width | 100 mm |
| Material | Metal |
| Type | Belt Tensioner, V-ribbed belt |
| Function | Belt Tensioner, V-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.20
Important compatibility info
| Weight | 0.97 kg |
| Ignition Coil | 4 Spark |
| Function | Ignition Coil |
| Type | Ignition Coil |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.20
Important compatibility info
| Type | Brake Caliper |
| Placement on Vehicle | Rear Axle Right |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 179489 |
| Weight | 1.462 kg |
| Function | Brake Caliper |
| Brake caliper piston diameter | 34 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.20
Important compatibility info
| Voltage | 12 V |
| Driver Position | for right-hand drive vehicles |
| Weight | 1.7 kg |
| Type | Interior Blower |
| Function | Interior Blower |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.20
Important compatibility info
| Parameter | 5PK |
| Function | Belt Pulley, crankshaft |
| Outer diameter | 155 mm |
| Inner diameter | 18 mm |
| Weight | 1.595 kg |
| Additional Information 2 | with screw |
| Number of Ribs | 4 |
| Width | 22 mm |
| Extra Description | ProKit |
| Type | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Belt Pulley, crankshaft (26367)
- 1x Febi Centering Bolt, crankshaft pulley (33529)
£58.20
Important compatibility info
| Weight | 1.632 kg |
| Paired article numbers | 183615 |
| Function | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | Rear, Front Axle Right, Lower |
| Type | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
| Cone Size | 20 mm |
| Additional Information | with rubber-metal mounts |
| Material | Aluminium |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.20
Important compatibility info
| Weight | 0.577 kg |
| Number of Ribs | 5 |
| Tightening Torque | 85 Nm |
| Function | Alternator Freewheel Clutch |
| Additional Information 2 | with lid |
| Type | Alternator Freewheel Clutch |
| Width | 39 mm |
| Outer diameter | 63 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.20
Important compatibility info
| Inner diameter | 12 mm |
| Placement on Vehicle | Rear |
| Outer diameter | 144 mm |
| Thickness | 30 mm. 59 mm |
| Number of Holes | 6 |
| Bolt Hole Circle Diameter | 110 mm |
| Function | Joint, propshaft |
| Weight | 0.73 kg |
| Type | Joint, propshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.20
Important compatibility info
| Width | 200 mm |
| Length | 516 mm |
| Thickness | 11 mm |
| Function | Gasket, cylinder head cover |
| Weight | 0.90 kg |
| Type | Gasket, cylinder head cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.20
Important compatibility info
| Weight | 0.397 kg |
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 142 |
| Type | Timing Chain |
| Function | Timing Chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.20
Important compatibility info
| Extra Description | febi Plus |
| Function | Oil Separator, crankcase ventilation |
| Type | Oil Separator, crankcase ventilation |
| Weight | 0.449 kg |
| for OE number | 06K 103 495 AP |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.20
Important compatibility info
| Seal Material | Rubber |
| Type | Water Pump, engine cooling |
| Weight | 1.078 kg |
| Number of Wings | 7 |
| Water pump impeller material | Metal |
| Function | Water Pump, engine cooling |
| Housing material | Metal |
| Additional Information | with gasket/seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.20
Important compatibility info
| Pipe Diameter | 38 mm |
| Weight | 3.6 kg |
| Piston conrod diameter | 13 mm |
| Type | Shock Absorber, driver cab suspension |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Min. Length | 347 mm |
| Placement on Vehicle | Front |
| Function | Shock Absorber, driver cab suspension |
| Mounting points diameter | 14 mm. 25 mm |
| Operating Mode | Mechanical |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.20
Important compatibility info
| Weight | 0.112 kg |
| Number of Connectors / Ports | 14 |
| Combi Switch Function | with cruise control, with indicator function, with high beam function |
| Type | Steering Column Switch |
| Function | Steering Column Switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.20
Important compatibility info
| Weight | 1.160 kg |
| Number of Wings | 7 |
| Type | Water Pump, engine cooling |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Metal |
| Seal Material | Rubber |
| Material | Cast Aluminium |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.20
Important compatibility info
| Filter type | Screen Filter |
| Function | Hydraulic Filter Kit, automatic transmission |
| Weight | 0.630 kg |
| Length | 253 mm |
| Height | 80 mm |
| Width | 207 mm |
| Type | Hydraulic Filter Kit, automatic transmission |
| Additional Information | with gasket/seal |
| Additional Information 2 | with bolts/screws |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.20
Important compatibility info
| Weight | 0.420 kg |
| External Thread Size | M6 x 1, M26 x 1,5 |
| Internal Thread Size | M12 x 1,5 |
| Function | Breather Valve |
| Type | Breather Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.20
Important compatibility info
| Weight | 0.93 kg |
| Length | 800 mm |
| Width | 250 mm |
| Material | Rubber |
| Thickness | 30 mm |
| Function | Gasket, oil sump |
| Type | Gasket, oil sump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.20
Important compatibility info
| Weight | 0.545 kg |
| Inner diameter | 38 mm |
| Inner diameter 1 | 42 mm |
| Inner diameter 2 | 51 mm |
| Type | Charge Air Hose |
| Function | Charge Air Hose |
| Inner diameter 3 | 51 mm |
| Additional Information 2 | with clamps |
| Number of hoses | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.20
Important compatibility info
| Weight | 0.261 kg |
| Number of Connectors / Ports | 3 |
| Function | Ignition Coil |
| Type | Ignition Coil |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.20
Important compatibility info
| Type | Control/Trailing Arm, wheel suspension |
| Cone Size | 20 mm |
| Weight | 1.632 kg |
| Paired article numbers | 183616 |
| Function | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
| Placement on Vehicle | Rear, Front Axle Left, Lower |
| Additional Information | with rubber-metal mounts |
| Material | Aluminium |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.20
Important compatibility info
| Additional Information 2 | with cable |
| Placement on Vehicle | Front |
| Voltage | 12 V |
| Number of Connectors / Ports | 4 |
| Function | Wiper Motor |
| Driver Position | for right-hand drive vehicles |
| Weight | 1.250 kg |
| Type | Wiper Motor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.20
Important compatibility info
| Weight | 0.392 kg |
| Inner length 1 | 505 mm |
| Function | Cable Pull, manual transmission |
| Placement on Vehicle | Left |
| Type | Cable Pull, manual transmission |
| Outer length 1 | 820 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.20
Important compatibility info
| Weight | 1.690 kg |
| Placement on Vehicle | Right |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.21
Important compatibility info
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Placement on Vehicle | Rear, both sides |
| External Thread Size | M16 x 1,5 |
| Type | Mounting, engine |
| Weight | 3.770 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.21
Important compatibility info
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Weight | 1.102 kg |
| Type | Mounting, engine |
| Replaces | 17962 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.21
Important compatibility info
| Weight | 2.65 kg |
| Placement on Vehicle | Left |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
| for OE number | 1363378080 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£58.21
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023