Important compatibility info
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Weight | 2.956 kg |
Steering arm type | Control Arm, Four-Point Link (CV) |
Additional Information 2 | with ball joint |
Material | Sheet Steel |
Placement on Vehicle | Front Axle Right, Lower |
Cone Size | 17 mm |
Paired article numbers | 175414 |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.55 kg |
Number of Connectors / Ports | 4 |
Function | Thermostat, coolant |
Opening Temperature | 83 °C |
Type | Thermostat, coolant |
Additional Information | with gasket/seal |
Additional Information 2 | with Temperature Switch |
Housing Type | with housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Combi Switch Function | with hazard warning light function, with fog-lamp function, with rear fog light function, with light dimmer function |
Weight | 0.089 kg |
Function | Switch, headlight |
Type | Switch, headlight |
Control Type | Rotary Operation |
Switch | with dimmer switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.49 kg |
Material | Cast Aluminium |
Number of Wings | 7 |
Type | Water Pump, engine cooling |
Function | Water Pump, engine cooling |
Water pump impeller material | Plastic |
Seal Material | Paper |
Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Cast Steel |
Placement on Vehicle | Rear Axle Right, Upper |
Steering arm type | Control Arm |
Function | Control/Trailing Arm, wheel suspension |
Paired article numbers | 184453 |
Additional Information | with rubber-metal mounts |
Weight | 3.328 kg |
Type | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.86 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 252 mm |
Additional Information | with counter nut |
Function | Inner Tie Rod |
Extra Description | ProKit |
Type | Inner Tie Rod |
External Thread Size | M18 x 1,5 |
Internal Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.37 kg |
Placement on Vehicle | Left, Lower, Front, Front Axle |
Material | Aluminium |
Steering arm type | Control Arm |
Paired article numbers | 106560 |
Function | Control/Trailing Arm, wheel suspension |
Additional Information 2 | without ball joint |
Type | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | with ball joint |
Additional Information | with rubber mounts |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Weight | 2.956 kg |
Cone Size | 17 mm |
Paired article numbers | 175415 |
Steering arm type | Control Arm |
Material | Sheet Steel |
Placement on Vehicle | Front Axle Left, Lower |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Control/Trailing Arm, wheel suspension |
Replaces | 19123 |
Paired article numbers | 19120 |
Additional Information | with holder, with rubber mounts |
Weight | 4.100 kg |
Type | Control/Trailing Arm, wheel suspension |
Steering arm type | Control Arm |
Additional Information 2 | without ball joint |
Material | Cast Steel |
Placement on Vehicle | Front Axle Left, Lower |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.758 kg |
Housing material | Aluminium |
Additional Information 2 | with handle, with switch |
Height | 220 mm |
Width | 125 mm |
Additional Information | with holder |
Inspection Tag | EMC |
Rated Power | 22 W |
Light Design | LED |
Mounting Type | Fully assembled |
Cable Length | 280 mm |
Depth | 73 mm |
Voltage from | 12 V |
Light Distribution | Long-range illumination |
Voltage to | 36 V |
Protection Type (IP Code) | IP6K9K |
Fulfils ECE norm | R10 |
Lumen | 2160 lm |
Temperature range from | -30 °C |
Temperature range to | 50 °C |
Function | Worklight |
Extra Description | ProKit |
Type | Worklight |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Right |
Additional Information 2 | with nut |
Thread Size | M20x1,5 |
External Teeth, Wheel Side | 23 |
Weight | 5.702 kg |
External Teeth, Diff.Side | 23 |
Min. Length | 727 mm |
Wheel Sided Joint Diameter | 84 mm |
Transmission-side joint diameter | 78.6 mm |
Type | Drive Shaft |
Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.846 kg |
Placement on Vehicle | Front Axle Left, inner, Front Axle Right |
Width | 41 mm |
Outer diameter | 115 mm |
Inner diameter | 60 mm |
Bearing Type | Tapered Roller Bearing |
Function | Wheel Bearing |
Type | Wheel Bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Charge Air Cooler, Left |
Height | 145 mm |
Width | 290 mm |
Additional Information 2 | with clamps |
Inner diameter 1 | 49 mm |
Inner diameter 2 | 66 mm |
Weight | 1.368 kg |
Type | Charge Air Hose |
Hose Length | 690 mm |
Function | Charge Air Hose |
Turbocharger line | Piping to charge air cooler |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.97 kg |
Function | Control/Trailing Arm, wheel suspension |
Paired article numbers | 33366 |
Steering arm type | Control Arm |
Material | Aluminium |
Placement on Vehicle | Front Axle Right, Lower, Rear |
Additional Information | with fastening/mounting material |
Extra Description | ProKit |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with rubber mount, with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (21198)
- 1x Febi Mounting and Bolting Kit, control/trailing arm (33201)
Important compatibility info
Function | Drive Shaft |
Placement on Vehicle | Front Axle Left |
Additional Information 2 | with nut |
External Teeth, Wheel Side | 36 |
Weight | 5.000 kg |
Min. Length | 546 mm |
Wheel Sided Joint Diameter | 89 mm |
Transmission-side joint diameter | 107.7 mm |
Type | Drive Shaft |
External Thread Size | M20 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | with nut |
External Teeth, Wheel Side | 25 |
Thread Size | M24x1,5 |
Wheel Sided Joint Diameter | 79 mm |
Min. Length | 944 mm |
Function | Drive Shaft |
Type | Drive Shaft |
External Teeth, Diff.Side | 26 |
Weight | 7.564 kg |
Transmission-side joint diameter | 81.5 mm |
Placement on Vehicle | Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 245 mm |
Outer diameter | 165 mm |
Number of Coils | 5 |
Function | Suspension Spring |
Placement on Vehicle | Rear Axle |
Weight | 4.67 kg |
Wire Diameter | 20 mm |
Type | Suspension Spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 3.03 kg |
Type | Hub, crankshaft |
Function | Hub, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.049 kg |
Placement on Vehicle | Left Exterior Mirror |
Length | 58 mm |
Height | 64 mm |
Width | 90 mm |
Paired article numbers | 107878 |
Type | Auxiliary Direction Indicator |
Function | Auxiliary Direction Indicator |
Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Internal Thread Size | M10 x 1,5 |
External Thread Size | M14 x 1,5 |
Placement on Vehicle | Front Axle Left, Lower, Front Axle Right |
Function | Ball Joint |
Weight | 1.15 kg |
Extra Description | ProKit |
Type | Ball Joint |
Additional Information 2 | with bolts/screws |
Steering arm type | for control arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Ball Joint (28355)
- 1x Febi Washer (38464)
- 1x Febi Pulley Bolt (38473)
Important compatibility info
Weight | 1.724 kg |
Internal Thread Size | M12 x 1,5 |
Placement on Vehicle | Rear Axle |
Outer diameter | 145 mm. 45 mm |
Thickness | 67 mm |
Number of Holes | 6 |
Number of Teeth | 30 |
Function | Wheel Hub |
Type | Wheel Hub |
Additional Information 2 | without wheel bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Belt Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Function | V-Ribbed Belt Set |
Length | 1205 mm |
Width of castor bearing surface | 25 mm |
Number of Ribs | 6 |
Weight | 0.723 kg |
Type | V-Ribbed Belt Set |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi V-Ribbed Belt (177984)
- 1x Febi Belt Tensioner, v-ribbed belt (180107)
Important compatibility info
Brake Disc Thickness | 40 mm |
Thickness | 54.5 mm |
Placement on Vehicle | Front Axle |
Minimum thickness | 37 mm |
Brake Disc Type | Internally Vented |
Inner diameter | 145 mm |
Outer diameter | 310 mm |
Bolt Hole Circle Diameter | 140 mm |
Centering Diameter | 114 mm |
Surface | Coated |
Weight | 13.650 kg |
Rim Hole Number | 6 -Hole |
Type | Brake Disc |
Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 3.295 kg |
Placement on Vehicle | Front Axle Right, Lower |
Material | Cast Steel |
Steering arm type | Control Arm |
Paired article numbers | 39644 |
Function | Control/Trailing Arm, wheel suspension |
Extra Description | ProKit |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with ball joint, with screw, with bearing |
Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (39628)
- 1x Febi Nut, ball joint (21884)
- 1x Febi Screw (39229)
Important compatibility info
Weight | 0.049 kg |
Colour | Orange |
Placement on Vehicle | Right Exterior Mirror |
Length | 58 mm |
Height | 64 mm |
Width | 90 mm |
Paired article numbers | 107877 |
Type | Auxiliary Direction Indicator |
Function | Auxiliary Direction Indicator |
Extra Description | febi Plus |
Light Design | Halogen |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Paired article numbers | 14562 |
Colour | Grey |
Thread Type | with left-hand thread |
Cone Size | 30 mm |
Function | Tie Rod End |
Placement on Vehicle | Front Axle Left |
Length | 133 mm |
Material | Steel |
Outer diameter | 40 mm |
Extra Description | ProKit |
Type | Tie Rod End |
Weight | 2.853 kg |
External Thread Size | M24 x 1,5 |
Internal Thread Size | M46 x 1,5 |
Additional Information 2 | with crown nut |
Hole Spacing | 50 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Brake Shaft, drum brake |
Outer diameter | 98 mm |
Number of Teeth | 26 |
Length | 296 mm |
Screw length below head | 245 mm |
Weight | 3.633 kg |
Type | Brake Shaft, drum brake |
Placement on Vehicle | Right Front |
Paired article numbers | 179423 |
Brake Shaft Cam | S-cam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Repair Kit, kingpin |
Placement on Vehicle | Front Axle Left, Lower, Front Axle Right |
Length | 126 mm |
Outer diameter | 54 mm. 50 mm |
Weight | 2.028 kg |
Extra Description | ProKit |
Type | Repair Kit, kingpin |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Seal Ring, steering knuckle (03028)
- 1x Febi Lock Ring, steering knuckle (05880)
- 1x Febi Circlip (06065)
- 1x Febi Seal Ring, steering knuckle (26286)
- 2x Febi Bush, steering knuckle (15858)
- 1x Febi Kingpin (26289)
Important compatibility info
Placement on Vehicle | Front Axle Left, Front Axle Right |
Width | 44 mm |
Outer diameter | 80.9 mm |
Inner diameter | 27.6 mm |
Number of Holes | 4 |
Bolt Hole Circle Diameter | 100 mm |
Function | Wheel Bearing Kit |
Weight | 2.73 kg |
Type | Wheel Bearing Kit |
Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with ABS sensor ring |
Bearing Type | Rolling Bearing |
Outer diameter 1 | 64.1 mm |
Outer diameter 2 | 137 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 5.2 kg |
Placement on Vehicle | Front Axle |
Shock Absorber Type | Oil Pressure |
Shock Absorber Mounting Type | Top eye, Bottom eye |
Max. Length | 760 mm |
Min. Length | 474 mm |
Pipe Diameter | 76 mm. 63 mm |
Mounting points diameter | 20 mm |
Piston conrod diameter | 20 mm |
Function | Shock Absorber |
Shock Absorber Design | Telescopic Shock Absorber |
Type | Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Screw length below head | 245 mm |
Number of Teeth | 26 |
Length | 296 mm |
Outer diameter | 98 mm |
Function | Brake Shaft, drum brake |
Type | Brake Shaft, drum brake |
Weight | 3.633 kg |
Paired article numbers | 179425 |
Placement on Vehicle | Left Front |
Brake Shaft Cam | S-cam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.31 kg |
Width of castor bearing surface | 25 mm |
Material | Metal |
Outer diameter | 70 mm |
Type | Deflection/Guide Pulley, v-ribbed belt |
Function | Deflection/Guide Pulley, v-ribbed belt |
Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
DIN / ISO | 12098, 1185, 3731 |
Number of Connectors / Ports | 15. 7 |
Version | OE Standard |
Function | Adaptor, electric filament |
Port / Connector type | 15 to 2x7 |
Assignment plan scheme number | 4 |
Type | Adaptor, electric filament |
Weight | 0.552 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.38 kg |
Outer diameter | 150 mm |
Thickness | 38 mm |
Number of Ribs | 3 |
Parameter | 4PK |
Function | Belt Pulley, crankshaft |
Additional Information | with pulse generator wheel |
Type | Belt Pulley, crankshaft |
for OE number | 55202554 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Left Rear |
Type | Window Regulator |
Function | Window Regulator |
Number of Doors | 5 |
Operating Mode | Electric |
Weight | 1.2 kg |
Additional Information | without electric motor |
Paired article numbers | 186308 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with adjuster |
Weight | 0.40 kg |
Type | Tailgate Lock |
Function | Tailgate Lock |
Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 3.841 kg |
Paired article numbers | 34223 |
Steering arm type | Control Arm |
Function | Control/Trailing Arm, wheel suspension |
Material | Sheet Steel |
Placement on Vehicle | Front Axle Right, Lower |
Extra Description | ProKit |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with ball joint, with rubber mount |
Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (23798)
Important compatibility info
Weight | 5.555 kg |
Pipe Diameter | 38 mm |
Function | Centre Rod Assembly |
Length | 763 mm |
Outer diameter | 38 mm |
Rod/Strut | Push Rod |
Cone Size | 28.6 mm |
Extra Description | ProKit |
Internal Thread Size | M30 x 1,5 RHT |
External Thread Size | M20 x 1,5 |
Type | Centre Rod Assembly |
Additional Information | with castellated nut and split pins |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | transmission sided, Rear Axle Left, Rear Axle Right |
Weight | 2.960 kg |
External Teeth, Diff.Side | 29 |
Int. teeth, diff.side, conn.to transm. | 35 |
Type | Joint Kit, drive shaft |
Function | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Radiator Hose |
Weight | 0.367 kg |
Hose Length | 425 mm |
Cooling Hose | from engine to engine cooler |
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Placement on Vehicle | Upper Left |
Type | Radiator Hose |
Additional Information 2 | with quick couplers |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Paired article numbers | 19121 |
Weight | 4.100 kg |
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Steering arm type | Control Arm |
Additional Information 2 | without ball joint |
Material | Cast Steel |
Additional Information | with holder, with rubber mounts |
Placement on Vehicle | Front Axle Right, Lower |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.967 kg |
Type | Dryer, air conditioning |
Function | Dryer, air conditioning |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Cone Size | 32 mm |
Pipe Diameter | 36 mm |
Placement on Vehicle | Rear Axle |
Length | 390 mm |
Rod/Strut | Coupling Rod |
Weight | 4.2 kg |
Function | Link/Coupling Rod, stabiliser bar |
External Thread Size | M24 x 1,5 |
Extra Description | ProKit |
Type | Link/Coupling Rod, stabiliser bar |
Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Wheel Bearing Kit |
Bearing Type | Angular Ball Bearing |
Inner diameter | 25 mm |
Additional Information 2 | Wheel Bearing integrated into wheel hub |
Width | 59 mm |
Outer diameter | 84 mm |
Function | Wheel Bearing Kit |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Outer diameter 2 | 137 mm |
Outer diameter 1 | 67 mm |
Weight | 1.340 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Thread Size | M22x1,5 |
Additional Information 2 | with nut |
Placement on Vehicle | Front Axle Left |
Transmission-side joint diameter | 81.5 mm |
Function | Drive Shaft |
Type | Drive Shaft |
Wheel Sided Joint Diameter | 82.0 mm |
Min. Length | 595 mm |
External Teeth, Diff.Side | 34 |
External Teeth, Wheel Side | 26 |
Weight | 5.744 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Replaces | 12439 |
Cone Size | 18 mm |
Pipe Diameter | 32 mm |
Type | Tie Rod |
Function | Tie Rod |
Extra Description | ProKit |
Weight | 5.167 kg |
Placement on Vehicle | Front Axle |
Length | 1352 mm |
Additional Information 2 | with crown nut |
External Thread Size | M14 x 1,5, M20 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.540 kg |
Additional Information | with gaskets/seals |
Material | Cast Aluminium |
Additional Information 2 | with seal ring |
Number of Wings | 6 |
Type | Water Pump, engine cooling |
Function | Water Pump, engine cooling |
Water pump impeller material | Metal |
Seal Material | Rubber |
Heating / Cooling | for vehicles with oil cooler |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle |
Length | 380 mm |
Thickness | 85 mm |
Rod/Strut | Coupling Rod |
Type | Link/Coupling Rod, stabiliser bar |
Function | Link/Coupling Rod, stabiliser bar |
Weight | 2.8 kg |
Additional Information 2 | without rubber mount(s) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Silicone, EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Weight | 0.43 kg |
Type | Charge Air Hose |
Function | Charge Air Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.94 kg |
Additional Information | with axle nut |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Width | 37 mm |
Outer diameter | 83 mm |
Inner diameter | 42 mm |
Bearing Type | Angular Ball Bearing |
Type | Wheel Bearing Kit |
Function | Wheel Bearing Kit |
Additional Information 2 | with integrated magnetic sensor ring, with retaining ring, with ABS sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023