Important compatibility info
Weight | 3.5 kg |
Placement on Vehicle | Rear Axle Right |
Length | 222 mm |
Operating Mode | Automatic |
Paired article numbers | 35110 |
Function | Adjuster, braking system |
Hole Spacing | 160 mm |
Type | Adjuster, braking system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Adjuster, braking system |
Paired article numbers | 31600 |
Placement on Vehicle | Rear Axle Left |
Weight | 3.7 kg |
Operating Mode | Automatic |
Type | Adjuster, braking system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Paired article numbers | 35119 |
Weight | 3.502 kg |
Operating Mode | Automatic |
Placement on Vehicle | Front Axle Right |
Length | 235 mm |
Function | Adjuster, braking system |
Type | Adjuster, braking system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Bore Diameter | 11.05 mm |
External Teeth, Wheel Side | 38 |
Weight | 7.038 kg |
Number of mounting bores | 6 |
Function | Drive Shaft |
Min. Length | 490 mm |
ABS Ring Diameter | 83 mm |
Type | Drive Shaft |
Transmission-side joint diameter | 81.5 mm |
Wheel Sided Joint Diameter | 97.9 mm |
Bolt Hole Circle Diameter | 103.85 mm |
Thread Size | M16x1,5 |
Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Right |
Length | 228 mm |
Operating Mode | Automatic |
Paired article numbers | 35095 |
Weight | 3.5 kg |
Type | Adjuster, braking system |
Function | Adjuster, braking system |
Hole Spacing | 175 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Right |
Operating Mode | Automatic |
Paired article numbers | 31613 |
Function | Adjuster, braking system |
Additional Information 2 | Self-adjusting |
Type | Adjuster, braking system |
Weight | 3.00 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 180 mm |
Width | 470 mm |
Material | Metal |
Thickness | 1.2 mm |
Function | Gasket, cylinder head |
Bore Diameter | 88.5 mm |
Weight | 0.305 kg |
Type | Gasket, cylinder head |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 3.6 kg |
Placement on Vehicle | Rear Axle Left |
Operating Mode | Automatic |
Paired article numbers | 31596 |
Function | Adjuster, braking system |
Type | Adjuster, braking system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 3.1 kg |
Additional Information 2 | Self-adjusting |
Placement on Vehicle | Left |
Operating Mode | Automatic |
Paired article numbers | 31609 |
Type | Adjuster, braking system |
Function | Adjuster, braking system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.654 kg |
Function | V-Ribbed Belt Set |
Type | V-Ribbed Belt Set |
Length | 905 mm |
Number of Ribs | 6 |
Belt Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Width of castor bearing surface | 25 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi V-Ribbed Belt (28903)
- 1x Febi Belt Tensioner, v-ribbed belt (180107)
Important compatibility info
Weight | 3.01 kg |
Additional Information 2 | Self-adjusting |
Placement on Vehicle | Right |
Operating Mode | Automatic |
Type | Adjuster, braking system |
Function | Adjuster, braking system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Paired article numbers | 31599 |
Function | Adjuster, braking system |
Placement on Vehicle | Right |
Weight | 3.5 kg |
Type | Adjuster, braking system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.632 kg |
Paired article numbers | 183615 |
Function | Control/Trailing Arm, wheel suspension |
Placement on Vehicle | Rear, Front Axle Right, Lower |
Type | Control/Trailing Arm, wheel suspension |
Steering arm type | Control Arm |
Cone Size | 20 mm |
Additional Information | with rubber-metal mounts |
Material | Aluminium |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Operating Mode | Automatic |
Weight | 3.2 kg |
Placement on Vehicle | both sides |
Function | Adjuster, braking system |
Type | Adjuster, braking system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | Self-adjusting |
Placement on Vehicle | Right |
Operating Mode | Automatic |
Paired article numbers | 31608 |
Function | Adjuster, braking system |
Type | Adjuster, braking system |
Weight | 3.2 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Right |
Paired article numbers | 178689 |
Operating Mode | Automatic |
Function | Adjuster, braking system |
Type | Adjuster, braking system |
Weight | 3.123 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Adjuster, braking system |
Paired article numbers | 31605 |
Placement on Vehicle | Left |
Operating Mode | Automatic |
Weight | 3.1 kg |
Additional Information 2 | Self-adjusting |
Type | Adjuster, braking system |
Replaces | 20205; 31585 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.577 kg |
Number of Ribs | 5 |
Tightening Torque | 85 Nm |
Function | Alternator Freewheel Clutch |
Additional Information 2 | with lid |
Type | Alternator Freewheel Clutch |
Width | 39 mm |
Outer diameter | 63 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 3.22 kg |
Operating Mode | Automatic |
Placement on Vehicle | both sides |
Function | Adjuster, braking system |
Type | Adjuster, braking system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 5.560 kg |
Cone Size | 26 mm |
Placement on Vehicle | Front Axle |
Adjustable | Adjustable on one side |
Length | 865 mm |
Thread Size | M20 x 1,5 |
Rod/Strut | Push Rod |
Type | Centre Rod Assembly |
Function | Centre Rod Assembly |
Extra Description | ProKit |
Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 3.24 kg |
Placement on Vehicle | Right, Rear Axle |
Operating Mode | Automatic |
Paired article numbers | 31616 |
Function | Adjuster, braking system |
Additional Information 2 | Self-adjusting |
Type | Adjuster, braking system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front and Rear, both sides |
Weight | 0.43 kg |
Type | Air Suspension Valve |
Function | Air Suspension Valve |
Replaces | 15496 |
Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Air Suspension Valve (23563)
- 1x Febi Mounting Set, driver cab suspension valve (29313)
Important compatibility info
Length | 202 mm |
Operating Mode | Automatic |
Paired article numbers | 43636 |
Function | Adjuster, braking system |
Placement on Vehicle | Rear Axle Right |
Weight | 3.440 kg |
Type | Adjuster, braking system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.93 kg |
Length | 800 mm |
Width | 250 mm |
Material | Rubber |
Thickness | 30 mm |
Function | Gasket, oil sump |
Type | Gasket, oil sump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle, Rear Axle |
Length | 175.4 mm |
Width | 78 mm |
Wear Warning Contact | incl. wear warning contact |
Inspection Tag | ECE R90 Approved |
Brake Type | Disc Brake |
Weight | 4.22 kg |
Thickness/Strength 1 | 22 mm |
Type | Brake Pad Set, disc brake |
Function | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.85 kg |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Width | 53 mm |
Outer diameter | 74 mm |
Inner diameter | 30 mm |
Bearing Type | Tapered Roller Bearing |
Type | Wheel Bearing Kit |
Sealing lip material | NBR (nitrile butadiene rubber) |
Function | Wheel Bearing Kit |
Additional Information 2 | Wheel Bearing integrated into wheel hub, with ABS sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.516 kg |
Placement on Vehicle | Rear |
Length | 136 mm |
Width | 72 mm |
Thickness | 69 mm |
Bearing/Mounting Type | Rubber-Metal Mount |
Function | Mounting, engine |
Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Bearing/Mounting Type | Hydro Mount |
Function | Mounting, engine |
Weight | 1.102 kg |
Type | Mounting, engine |
Replaces | 17962 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Left |
Number of Connectors / Ports | 2 |
Weight | 0.121 kg |
Type | Control Valve, camshaft adjustment |
Function | Control Valve, camshaft adjustment |
Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.178 kg |
Placement on Vehicle | Front, both sides |
Additional Information | with squeeze connector |
Cable Length | 300 mm |
Number of circuits | 34 |
Type | Cable Repair Set, door |
Function | Cable Repair Set, door |
Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023