Important compatibility info
Width of castor bearing surface | 38 mm |
Operating Mode | Automatic |
Weight | 1.350 kg |
Outer diameter | 70 mm |
Width | 100 mm |
Material | Metal |
Type | Belt Tensioner, V-ribbed belt |
Function | Belt Tensioner, V-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | with cable |
Placement on Vehicle | Front |
Voltage | 12 V |
Number of Connectors / Ports | 4 |
Function | Wiper Motor |
Driver Position | for right-hand drive vehicles |
Weight | 1.250 kg |
Type | Wiper Motor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.654 kg |
Function | V-Ribbed Belt Set |
Type | V-Ribbed Belt Set |
Length | 905 mm |
Number of Ribs | 6 |
Belt Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Width of castor bearing surface | 25 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi V-Ribbed Belt (28903)
- 1x Febi Belt Tensioner, v-ribbed belt (180107)
Important compatibility info
Bore Diameter | 11.05 mm |
External Teeth, Wheel Side | 38 |
Weight | 7.038 kg |
Number of mounting bores | 6 |
Function | Drive Shaft |
Min. Length | 490 mm |
ABS Ring Diameter | 83 mm |
Type | Drive Shaft |
Transmission-side joint diameter | 81.5 mm |
Wheel Sided Joint Diameter | 97.9 mm |
Bolt Hole Circle Diameter | 103.85 mm |
Thread Size | M16x1,5 |
Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Radiator Hose |
Weight | 0.367 kg |
Hose Length | 425 mm |
Cooling Hose | from engine to engine cooler |
Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Placement on Vehicle | Upper Left |
Type | Radiator Hose |
Additional Information 2 | with quick couplers |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Left |
Paired article numbers | 43637 |
Function | Adjuster, braking system |
Length | 202 mm |
Operating Mode | Automatic |
Weight | 3.440 kg |
Type | Adjuster, braking system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.31 kg |
Width of castor bearing surface | 25 mm |
Material | Metal |
Outer diameter | 70 mm |
Type | Deflection/Guide Pulley, v-ribbed belt |
Function | Deflection/Guide Pulley, v-ribbed belt |
Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 237 mm |
Outer diameter | 37 mm. 48 mm |
Function | Repair Kit, kingpin |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Weight | 3.15 kg |
Additional Information 2 | without bearing |
Extra Description | ProKit |
Type | Repair Kit, kingpin |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Kingpin (10494)
- 1x Febi Bush, kingpin (10495)
- 1x Febi Bush, kingpin (14441)
- 1x Febi Bush, kingpin (14442)
- 1x Febi Seal Ring, steering knuckle (14438)
- 1x Febi Seal Ring, steering knuckle (14439)
- 1x Febi Seal Ring (14437)
- 1x Febi Seal Ring, steering knuckle (14432)
- 1x Febi Seal Ring, steering knuckle (14431)
- 1x Febi Spacer, kingpin (14443)
- 2x Febi Spacer, kingpin (14434)
- 2x Febi Spacer, kingpin (14435)
- 2x Febi Spacer, kingpin (14436)
- 2x Febi Spacer, kingpin (14468)
- 1x Febi Split Pin (14433)
Important compatibility info
Operating Mode | Automatic |
Paired article numbers | 175148 |
Type | Adjuster, braking system |
Function | Adjuster, braking system |
Placement on Vehicle | Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Operating Mode | Automatic |
Paired article numbers | 31592 |
Function | Adjuster, braking system |
Placement on Vehicle | Right |
Weight | 3.3 kg |
Type | Adjuster, braking system |
Replaces | 20204 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Left |
Operating Mode | Automatic |
Paired article numbers | 31607 |
Function | Adjuster, braking system |
Weight | 3.3 kg |
Replaces | 20208; 31586; 31619 |
Additional Information 2 | Self-adjusting |
Type | Adjuster, braking system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Front Axle Right |
Weight | 2.57 kg |
Internal Thread Size | M30 x 1,5 RHT |
External Thread Size | M30 x 1,5 RHT |
Cone Size | 38 mm |
Length | 87 mm |
Extra Description | ProKit |
Additional Information | with crown nut and split pin |
Type | Angled Ball Joint / Tie Rod End |
Function | Angled Ball Joint / Tie Rod End |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Centre Rod Assembly |
Extra Description | ProKit |
Function | Centre Rod Assembly |
Length | 910 mm |
Rod/Strut | Push Rod |
Weight | 6.000 kg |
Cone Size | 30 mm |
Additional Information | with nuts |
Pipe Diameter | 38 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.09 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 800 mm |
Outer diameter | 15 mm |
Number of Connectors / Ports | 2 |
Function | Sensor, wheel speed |
Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 3.5 kg |
Placement on Vehicle | Rear Axle Right |
Length | 222 mm |
Operating Mode | Automatic |
Paired article numbers | 35110 |
Function | Adjuster, braking system |
Hole Spacing | 160 mm |
Type | Adjuster, braking system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 202 mm |
Operating Mode | Automatic |
Paired article numbers | 43636 |
Function | Adjuster, braking system |
Placement on Vehicle | Rear Axle Right |
Weight | 3.440 kg |
Type | Adjuster, braking system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | Requires special tools for mounting |
Weight | 0.58 kg |
Chain Type | Simplex, Closed chain |
Number of Chain Links | 112 |
Timing Chain Size | G68HPF, G68HR |
Function | Timing Chain |
Type | Timing Chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Pipe Diameter | 38 mm |
Weight | 3.6 kg |
Piston conrod diameter | 13 mm |
Type | Shock Absorber, driver cab suspension |
Shock Absorber Mounting Type | Top eye, Bottom eye |
Min. Length | 347 mm |
Placement on Vehicle | Front |
Function | Shock Absorber, driver cab suspension |
Mounting points diameter | 14 mm. 25 mm |
Operating Mode | Mechanical |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Adjuster, braking system |
Paired article numbers | 31600 |
Placement on Vehicle | Rear Axle Left |
Weight | 3.7 kg |
Operating Mode | Automatic |
Type | Adjuster, braking system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 3.12 kg |
Placement on Vehicle | Left |
Operating Mode | Automatic |
Paired article numbers | 31618 |
Function | Adjuster, braking system |
Replaces | 31595 |
Additional Information 2 | Self-adjusting |
Type | Adjuster, braking system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Adjuster, braking system |
Operating Mode | Automatic |
Type | Adjuster, braking system |
Paired article numbers | 175155 |
Placement on Vehicle | Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.93 kg |
Length | 800 mm |
Width | 250 mm |
Material | Rubber |
Thickness | 30 mm |
Function | Gasket, oil sump |
Type | Gasket, oil sump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Right |
Operating Mode | Automatic |
Paired article numbers | 31613 |
Function | Adjuster, braking system |
Additional Information 2 | Self-adjusting |
Type | Adjuster, braking system |
Weight | 3.00 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Left |
Operating Mode | Automatic |
Paired article numbers | 31617 |
Function | Adjuster, braking system |
Additional Information 2 | Self-adjusting |
Type | Adjuster, braking system |
Weight | 3.13 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.645 kg |
Placement on Vehicle | Rear Axle |
Outer diameter | 145 mm. 42 mm |
Thickness | 79 mm |
Additional Information 2 | without wheel bearing |
Number of Holes | 6 |
Number of Teeth | 27 |
Internal Thread Size | M12 x 1,5 |
Function | Wheel Hub |
Type | Wheel Hub |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Oil Separator, crankcase ventilation |
Function | Oil Separator, crankcase ventilation |
Weight | 0.381 kg |
Extra Description | febi Plus |
for OE number | 646 010 14 62 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Paired article numbers | 35122 |
Function | Adjuster, braking system |
Weight | 3.5 kg |
Placement on Vehicle | Rear Axle Right |
Length | 229 mm |
Operating Mode | Automatic |
Type | Adjuster, braking system |
Hole Spacing | 165 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front and Rear, both sides |
Weight | 0.43 kg |
Type | Air Suspension Valve |
Function | Air Suspension Valve |
Replaces | 15496 |
Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Air Suspension Valve (23563)
- 1x Febi Mounting Set, driver cab suspension valve (29313)
Important compatibility info
Additional Information | with gasket/seal |
Type | EGR Valve |
Function | EGR Valve |
Weight | 0.240 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 3.02 kg |
Placement on Vehicle | Right |
Operating Mode | Automatic |
Paired article numbers | 31614 |
Function | Adjuster, braking system |
Type | Adjuster, braking system |
Additional Information 2 | Self-adjusting |
Replaces | 31594 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Right |
Paired article numbers | 178689 |
Operating Mode | Automatic |
Function | Adjuster, braking system |
Type | Adjuster, braking system |
Weight | 3.123 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | Self-adjusting |
Weight | 3.1 kg |
Placement on Vehicle | Left |
Operating Mode | Automatic |
Paired article numbers | 31612 |
Function | Adjuster, braking system |
Type | Adjuster, braking system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.577 kg |
Number of Ribs | 5 |
Tightening Torque | 85 Nm |
Function | Alternator Freewheel Clutch |
Additional Information 2 | with lid |
Type | Alternator Freewheel Clutch |
Width | 39 mm |
Outer diameter | 63 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Brake Caliper |
Placement on Vehicle | Rear Axle Left |
Material | Cast Iron |
Brake Caliper Type | Brake Caliper (1 piston) |
Paired article numbers | 179491 |
Weight | 1.462 kg |
Function | Brake Caliper |
Brake caliper piston diameter | 34 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Right |
Length | 228 mm |
Operating Mode | Automatic |
Paired article numbers | 35095 |
Weight | 3.5 kg |
Type | Adjuster, braking system |
Function | Adjuster, braking system |
Hole Spacing | 175 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.632 kg |
Paired article numbers | 183615 |
Function | Control/Trailing Arm, wheel suspension |
Placement on Vehicle | Rear, Front Axle Right, Lower |
Type | Control/Trailing Arm, wheel suspension |
Steering arm type | Control Arm |
Cone Size | 20 mm |
Additional Information | with rubber-metal mounts |
Material | Aluminium |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Brake Caliper |
Placement on Vehicle | Rear Axle Right |
Material | Cast Iron |
Brake Caliper Type | Brake Caliper (1 piston) |
Paired article numbers | 179489 |
Weight | 1.462 kg |
Function | Brake Caliper |
Brake caliper piston diameter | 34 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Left |
Operating Mode | Automatic |
Paired article numbers | 31581 |
Weight | 3.6 kg |
Function | Adjuster, braking system |
Type | Adjuster, braking system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 3.321 kg |
Type | Adjuster, braking system |
Function | Adjuster, braking system |
Placement on Vehicle | Right |
Paired article numbers | 178687 |
Operating Mode | Automatic |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Operating Mode | Automatic |
Length | 234 mm |
Placement on Vehicle | Front Axle Left |
Function | Adjuster, braking system |
Paired article numbers | 35118 |
Weight | 3.503 kg |
Type | Adjuster, braking system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front |
Operating Mode | Mechanical |
Pipe Diameter | 48 mm. 42 mm |
Max. Length | 336 mm |
Weight | 1.6 kg |
Mounting points diameter | 14 mm |
Type | Shock Absorber, driver cab suspension |
Function | Shock Absorber, driver cab suspension |
Min. Length | 221 mm |
External Thread Size | M12 x 1,75 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Left |
Operating Mode | Manual |
Paired article numbers | 177064 |
Weight | 3.35 kg |
Type | Adjuster, braking system |
Function | Adjuster, braking system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Adjuster, braking system |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Operating Mode | Automatic |
Type | Adjuster, braking system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | with ball joint |
Placement on Vehicle | Front Axle Left, Lower, outer |
Material | Sheet Steel |
Additional Information | with rubber mounts |
Steering arm type | Control Arm |
Paired article numbers | 193701 |
Weight | 0.302 kg |
Cone Size | 18 mm |
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.420 kg |
External Thread Size | M6 x 1, M26 x 1,5 |
Internal Thread Size | M12 x 1,5 |
Function | Breather Valve |
Type | Breather Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.565 kg |
Chain Type | Simplex |
Type | Guide Rails Kit, timing chain |
Function | Guide Rails Kit, timing chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 3.4 kg |
Operating Mode | Automatic |
Paired article numbers | 31579 |
Type | Adjuster, braking system |
Function | Adjuster, braking system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Paired article numbers | 175154 |
Type | Adjuster, braking system |
Function | Adjuster, braking system |
Operating Mode | Automatic |
Placement on Vehicle | Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with gaskets/seals |
Material | Cast Aluminium |
Weight | 2.460 kg |
Type | Water Pump, engine cooling |
Function | Water Pump, engine cooling |
Water pump impeller material | Metal |
Seal Material | Paper |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle, Rear Axle |
Length | 175.4 mm |
Width | 78 mm |
Wear Warning Contact | incl. wear warning contact |
Inspection Tag | ECE R90 Approved |
Brake Type | Disc Brake |
Weight | 4.22 kg |
Thickness/Strength 1 | 22 mm |
Type | Brake Pad Set, disc brake |
Function | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023