Proud to be a UK-based company
Contact us
Important compatibility info
| Material | Cast Aluminium |
| Number of Wings | 7 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Metal |
| Seal Material | Paper |
| Weight | 1.005 kg |
| Type | Water Pump, engine cooling |
| Additional Information | with gasket/seal |
| Additional Information 2 | with bolts/screws |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Water Pump, engine cooling (22388)
- 7x Febi Screw, waterpump (22387)
£60.99
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Bore Diameter | 14 mm |
| Shock Absorber Type | Gas Pressure |
| Shock Absorber System | Monotube |
| Shock Absorber Design | Telescopic Shock Absorber |
| Weight | 1.450 kg |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Mounting bores distance | 391 mm |
| Max. Length | 391 mm |
| Min. Length | 269 mm |
| Pipe Diameter | 48 mm. 38.5 mm |
| Type | Shock Absorber |
| Function | Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.00
Important compatibility info
| Weight | 2.56 kg |
| Placement on Vehicle | Rear Axle |
| Width | 40 mm |
| Outer diameter | 228 mm |
| Inspection Tag | ECE R90 Approved |
| Mounting Type | Pre-assembled |
| Function | Brake Shoe Set |
| Piston Diameter | 22.2 mm |
| Type | Brake Shoe Set |
| Additional Information | with wheel brake cylinder, with accessories, with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.01
Important compatibility info
| Spanner Size | 17 |
| Number of Connectors / Ports | 2 |
| Cable Length | 936 mm |
| Weight | 0.07 kg |
| Function | Sensor, exhaust gas temperature |
| External Thread Size | M14 x 1,5 |
| Type | Sensor, exhaust gas temperature |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.02
Important compatibility info
| Weight | 1.17 kg |
| Type | Heat Exchanger, interior heating |
| Function | Heat Exchanger, interior heating |
| Core Depth | 42 mm |
| Core Width | 380 mm |
| Core Length | 195 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.04
Important compatibility info
| Function | Repair Kit, suspension strut support mount |
| Material | Rubber/Metal |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Weight | 1.25 kg |
| Outer diameter | 177 mm |
| Type | Repair Kit, suspension strut support mount |
| Additional Information 2 | with ball bearing |
| Inner diameter | 14 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.05
Important compatibility info
| Weight | 1.17 kg |
| Number of Teeth | 123 |
| Type | Water Pump & Timing Belt Kit |
| Function | Water Pump & Timing Belt Kit |
| Water pump impeller material | Metal |
| Belts | with rounded tooth profile |
| Width | 27 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt Kit (21270)
- 1x Febi Water Pump, engine cooling (22241)
£61.05
Important compatibility info
| Weight | 5.769 kg |
| Rotor Style | Internally Vented |
| Rim Hole Number | 5 -Hole |
| Placement on Vehicle | Front Axle |
| Outer diameter | 280 mm |
| Brake Disc Thickness | 22 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Centering Diameter | 68 mm |
| Function | Brake Disc |
| Surface | Coated |
| Thickness | 46 mm |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.06
Important compatibility info
| Type | Gasket, oil sump |
| Length | 952 mm |
| Material | AEM (Ethylene Acrylate Rubber) |
| Function | Gasket, oil sump |
| Weight | 1.25 kg |
| Width | 371 mm |
| Height | 25 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.06
Important compatibility info
| Placement on Vehicle | Front Axle Left, Upper, Front Axle Right |
| Steering arm type | Control Arm |
| Weight | 1.294 kg |
| Cone Size | 21 mm |
| Material | Aluminium |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.07
Important compatibility info
| Height | 159 mm |
| Type | Fuel filter |
| Function | Fuel filter |
| Pipe Diameter | 10 mm |
| Outer diameter | 99 mm |
| Filter type | with water drain screw, with water separator, with filter heating |
| Weight | 0.750 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.07
Important compatibility info
| Weight | 0.046 kg |
| Function | Sensor, exhaust gas temperature |
| Cable Length | 400 mm |
| Number of Connectors / Ports | 2 |
| Spanner Size | 17 |
| Placement on Vehicle | before soot particulate filter |
| External Thread Size | M14 x 1,5 |
| Type | Sensor, exhaust gas temperature |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.07
Important compatibility info
| Weight | 1.636 kg |
| Placement on Vehicle | Left |
| Length | 203 mm |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, automatic transmission |
| Function | Mounting, automatic transmission |
| Hole Spacing | 198 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.07
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
| Weight | 0.509 kg |
| Type | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right, Lower, Front |
| Material | Aluminium |
| Additional Information 2 | with bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.08
Important compatibility info
| Inner diameter | 206 mm |
| Weight | 2.7 kg |
| Type | Cover Sheet, brake drum |
| Height | 104 mm |
| Placement on Vehicle | Rear Axle |
| Function | Cover Sheet, brake drum |
| Outer diameter | 450 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.09
Important compatibility info
| Paired article numbers | 181961 |
| Weight | 6.25 kg |
| Type | Brake Caliper |
| Function | Brake Caliper |
| Brake caliper piston diameter | 60 mm |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Placement on Vehicle | Front Axle Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.09
Important compatibility info
| Function | Sensor, exhaust gas temperature |
| External Thread Size | M14 x 1,5 |
| Cable Length | 275 mm |
| Weight | 0.057 kg |
| Number of Connectors / Ports | 2 |
| Type | Sensor, exhaust gas temperature |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.09
Important compatibility info
| Weight | 5.560 kg |
| Rotor Style | Solid |
| Rim Hole Number | 5 -Hole |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 294 mm |
| Thickness | 41.2 mm |
| Brake Disc Thickness | 13.5 mm |
| Minimum thickness | 11.5 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Centering Diameter | 68.1 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Function | Brake Disc |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.09
Important compatibility info
| Number of Teeth | 100 |
| Function | Water Pump & Timing Belt Kit |
| Weight | 1.16 kg |
| Type | Water Pump & Timing Belt Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt Kit (21280)
- 1x Febi Water Pump, engine cooling (22490)
£61.10
Important compatibility info
| Brake caliper piston diameter | 43 mm |
| Paired article numbers | 181451 |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Placement on Vehicle | Rear Axle Left |
| Material | Cast Iron |
| Weight | 2.519 kg |
| Type | Brake Caliper |
| Function | Brake Caliper |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.11
Important compatibility info
| Brake caliper piston diameter | 43 mm |
| Placement on Vehicle | Rear Axle Right |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 181450 |
| Weight | 2.519 kg |
| Type | Brake Caliper |
| Function | Brake Caliper |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.11
Important compatibility info
| Weight | 0.54 kg |
| Material | Cast Aluminium |
| Number of Wings | 6 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Metal |
| Seal Material | Rubber/Metal |
| Additional Information | with gasket/seal |
| Type | Water Pump, engine cooling |
| Additional Information 2 | with studs |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.12
Important compatibility info
| Number of Connectors / Ports | 2 |
| Weight | 0.27 kg |
| Type | Auxiliary water pump (cooling water circuit) |
| Function | Auxiliary water pump (cooling water circuit) |
| Operating Mode | Electric |
| Voltage | 12 V |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.12
Important compatibility info
| Placement on Vehicle | Left Front |
| Additional Information | without electric motor |
| Operating Mode | Electric |
| Paired article numbers | 194041 |
| Weight | 1.1 kg |
| Type | Window Regulator |
| Function | Window Regulator |
| Number of Doors | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.13
Important compatibility info
| Weight | 0.040 kg |
| Number of Connectors / Ports | 3 |
| Function | Sensor, crankshaft pulse |
| Type | Sensor, crankshaft pulse |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.13
Important compatibility info
| Weight | 2.427 kg |
| Placement on Vehicle | Front Axle Left, Upper |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 101279 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Additional Information | with rubber mounts, with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.13
Important compatibility info
| Bolt Hole Circle Diameter | 78 mm |
| External Teeth, Wheel Side | 36 |
| Weight | 4.880 kg |
| Wheel Sided Joint Diameter | 81 mm |
| Min. Length | 556 mm |
| Additional Information | with grease |
| Placement on Vehicle | Front Axle Left |
| Transmission-side joint diameter | 94 mm |
| Bore Diameter | 8.5 mm |
| Number of mounting bores | 6 |
| Function | Drive Shaft |
| Type | Drive Shaft |
| External Thread Size | M20 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.13
Important compatibility info
| Function | Auxiliary water pump (cooling water circuit) |
| Number of Connectors / Ports | 2 |
| Additional Information 2 | with cable |
| Weight | 0.290 kg |
| Type | Auxiliary water pump (cooling water circuit) |
| for OE number | 7N0 965 561 B |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.13
Important compatibility info
| Placement on Vehicle | Lower Left |
| Weight | 0.600 kg |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.13
Important compatibility info
| Cable Length | 250 mm |
| Function | Sensor, exhaust gas temperature |
| Placement on Vehicle | before soot particulate filter |
| Spanner Size | 17 |
| Number of Connectors / Ports | 2 |
| Weight | 0.045 kg |
| External Thread Size | M14 x 1,5 |
| Type | Sensor, exhaust gas temperature |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.13
Important compatibility info
| Weight | 1.234 kg |
| Placement on Vehicle | Right |
| Material | Rubber/Metal |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.13
Important compatibility info
| Placement on Vehicle | Rear Axle, Front Axle |
| Length | 217.6 mm |
| Width | 107.6 mm |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 30.5 mm |
| Function | Brake Pad Set, disc brake |
| Type | Brake Pad Set, disc brake |
| Weight | 10.38 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.14
Important compatibility info
| Number of mounting bores | 3 |
| Type | Central Slave Cylinder, clutch |
| Weight | 0.427 kg |
| Function | Central Slave Cylinder, clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.14
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Width | 75 mm |
| Outer diameter | 142 mm |
| Additional Information 2 | without wheel bearing |
| Inner diameter | 30 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Weight | 1.486 kg |
| Type | Wheel Hub |
| Function | Wheel Hub |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.16
Important compatibility info
| Function | Piston, air compressor |
| Outer diameter | 60 mm |
| Type | Piston, air compressor |
| Weight | 0.21 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.16
Important compatibility info
| Pulleys | with belt pulley |
| Weight | 1.140 kg |
| Number of Wings | 5 |
| Type | Water Pump, engine cooling |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Metal |
| Seal Material | Rubber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.16
Important compatibility info
| Weight | 0.218 kg |
| Function | Auxiliary water pump (cooling water circuit) |
| Type | Auxiliary water pump (cooling water circuit) |
| Number of Connectors / Ports | 3 |
| Voltage | 12 V |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.17
Important compatibility info
| Number of Chain Links | 130 |
| Timing Chain Size | G53RING-2 |
| Type | Timing Chain |
| Function | Timing Chain |
| Weight | 0.385 kg |
| Chain Type | Simplex, Closed chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.17
Important compatibility info
| Weight | 0.125 kg |
| Operating Mode | Pneumatic |
| Length | 175 mm |
| Function | Slave Cylinder, seat adjustment |
| Type | Slave Cylinder, seat adjustment |
| Number of Connectors / Ports | 2 |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.17
Important compatibility info
| Type | Alternator Freewheel Clutch |
| Weight | 0.638 kg |
| Number of Ribs | 6 |
| Function | Alternator Freewheel Clutch |
| Width | 56 mm |
| Outer diameter | 58 mm |
| Inner diameter | 17 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.17
Important compatibility info
| Weight | 0.310 kg |
| Length | 230 mm |
| Width | 80 mm |
| Thickness | 42 mm |
| Cable Length | 580 mm |
| Combi Switch Function | with indicator function, with klaxon, with high beam function |
| Type | Steering Column Switch |
| Function | Steering Column Switch |
| Number of Connectors / Ports | 9 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.17
Important compatibility info
| Paired article numbers | 43659 |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Extra Description | ProKit |
| External Thread Size | M16 x 1,5 |
| Cone Size | 20 mm |
| Additional Information 2 | with bearing, with ball joint |
| Steering arm type | Triangular Control Arm (CV) |
| Additional Information | with lock nut |
| Placement on Vehicle | Front Axle Right, Upper |
| Material | Sheet Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.17
Important compatibility info
| Weight | 1.975 kg |
| Additional Information | with lock nut |
| Function | Control/Trailing Arm, wheel suspension |
| Paired article numbers | 22368 |
| Steering arm type | Control Arm |
| Placement on Vehicle | Front Axle, Left Rear |
| Material | Aluminium |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with bearing, with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (17136)
- 1x Febi Mounting, control/trailing arm (12577)
£61.17
Important compatibility info
| Material | Aluminium |
| Outer diameter | 75 mm |
| Operating Mode | Automatic |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Width of castor bearing surface | 38 mm |
| Weight | 1.63 kg |
| Track rollers material | Metal |
| Type | Belt Tensioner, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.17
Important compatibility info
| Length | 92 mm |
| Width | 38 mm |
| Thickness | 75 mm |
| Voltage | 28 V |
| Function | Alternator Regulator |
| Weight | 0.096 kg |
| Hole Spacing | 55 mm |
| Type | Alternator Regulator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.17
Important compatibility info
| Function | Master Cylinder, clutch |
| Bore Diameter | 35 mm |
| Weight | 1.514 kg |
| Fill Medium | Brake Fluid |
| Type | Master Cylinder, clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.17
Important compatibility info
| Function | Oil sump |
| Extra Description | febi Plus |
| Type | Oil sump |
| Weight | 1.8 kg |
| Additional Information | with oil drain plug |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.17
Important compatibility info
| Min. Length | 598 mm |
| External Teeth, Diff.Side | 22 |
| Placement on Vehicle | Front Axle Right |
| Additional Information 2 | with nut |
| Thread Size | M24x1,5 |
| External Teeth, Wheel Side | 30 |
| Weight | 6.744 kg |
| Wheel Sided Joint Diameter | 88.9 mm |
| Transmission-side joint diameter | 93.9 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.17
Important compatibility info
| Weight | 7.64 kg |
| Rotor Style | Internally Vented |
| Rim Hole Number | 5 -Hole |
| Placement on Vehicle | Rear Axle |
| Thickness | 75.5 mm |
| Brake Disc Thickness | 22 mm |
| Minimum thickness | 20 mm |
| Bolt Hole Circle Diameter | 120 mm |
| Centering Diameter | 76 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Function | Brake Disc |
| Outer diameter | 314 mm |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.17
Important compatibility info
| Placement on Vehicle | Front Axle |
| Cone Size | 30 mm |
| Length | 429 mm |
| Pipe Diameter | 36 mm |
| Weight | 4.5 kg |
| Function | Tie Rod |
| Type | Tie Rod |
| Extra Description | ProKit |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.17
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023