Important compatibility info
Additional Information | with rubber mounts, with holder |
Material | Sheet Steel |
Steering arm type | Control Arm |
Placement on Vehicle | Front Axle Right, Upper |
Paired article numbers | 43336 |
Weight | 3.73 kg |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Centre Rod Assembly |
Cone Size | 17.8 mm |
Weight | 3.201 kg |
Function | Centre Rod Assembly |
Placement on Vehicle | Front Axle, Centre |
Rod/Strut | Push Rod |
Driver Position | for right-hand drive vehicles |
External Thread Size | M12 x 1,25 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Connectors / Ports | 5 |
Weight | 1.61 kg |
Type | Wiper Motor |
Function | Wiper Motor |
Voltage | 24 V |
Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Sealing lip material | NBR (nitrile butadiene rubber) |
Inner diameter | 30 mm |
Bolt Hole Circle Diameter | 112 mm |
Weight | 2.244 kg |
Bearing Type | Angular Ball Bearing |
Type | Wheel Bearing Kit |
Function | Wheel Bearing Kit |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Width | 50 mm |
Outer diameter | 140 mm |
Additional Information 2 | Wheel Bearing integrated into wheel hub |
Additional Information | with axle nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 3.716 kg |
Length | 130 mm |
Width | 130 mm |
Thickness | 91 mm |
Function | Cylinder Liner, air compressor |
Type | Cylinder Liner, air compressor |
Additional Information | with retaining rings, with piston rings, with piston pin, with piston |
Hole Spacing | 92 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | with ball joint |
Additional Information | with rubber mounts |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Weight | 2.956 kg |
Cone Size | 17 mm |
Paired article numbers | 175415 |
Steering arm type | Control Arm |
Material | Sheet Steel |
Placement on Vehicle | Front Axle Left, Lower |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Connectors / Ports | 3 |
Weight | 0.284 kg |
for OE number | 12 13 1 748 018 |
Type | Ignition Coil |
Function | Ignition Coil |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 7.3 kg |
Rim Hole Number | 5 -Hole |
Placement on Vehicle | Front Axle |
Outer diameter | 300 mm |
Thickness | 46.5 mm |
Brake Disc Thickness | 28 mm |
Minimum thickness | 25.4 mm |
Bolt Hole Circle Diameter | 112 mm |
Centering Diameter | 67 mm |
Surface | Coated |
Function | Brake Disc |
Rotor Style | Internally Vented |
Type | Brake Disc Rotor |
Replaces | 18887 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.63 kg |
Outer diameter | 314 mm |
Voltage | 12 V |
Function | Fan, engine cooling |
Type | Fan, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.37 kg |
Placement on Vehicle | Left, Lower, Front, Front Axle |
Material | Aluminium |
Steering arm type | Control Arm |
Paired article numbers | 106560 |
Function | Control/Trailing Arm, wheel suspension |
Additional Information 2 | without ball joint |
Type | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Combi Switch Function | with hazard warning light function, with fog-lamp function, with rear fog light function, with light dimmer function |
Weight | 0.089 kg |
Function | Switch, headlight |
Type | Switch, headlight |
Control Type | Rotary Operation |
Switch | with dimmer switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
for OE number | 005 545 28 13 |
Placement on Vehicle | Driver side |
Number of Connectors / Ports | 15. 4 |
Weight | 0.114 kg |
Function | Multi-Function Switch |
Combi Switch Function | Mirror Adjustment, Window Regulator, Door Locking |
Type | Multi-Function Switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.86 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 252 mm |
Additional Information | with counter nut |
Function | Inner Tie Rod |
Extra Description | ProKit |
Type | Inner Tie Rod |
External Thread Size | M18 x 1,5 |
Internal Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.421 kg |
Placement on Vehicle | Front Axle Left, Lower, Rear |
Steering arm type | Control Arm |
Paired article numbers | 33209 |
Thread Type | with right-hand thread |
Material | Cast Steel |
Function | Control/Trailing Arm, wheel suspension |
Extra Description | ProKit |
External Thread Size | M14 x 1,5 |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with rubber mount, with ball joint |
Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (21441)
- 1x Febi Camber Correction Screw (21560)
Important compatibility info
Brake Disc Thickness | 40 mm |
Thickness | 54.5 mm |
Placement on Vehicle | Front Axle |
Minimum thickness | 37 mm |
Brake Disc Type | Internally Vented |
Inner diameter | 145 mm |
Outer diameter | 310 mm |
Bolt Hole Circle Diameter | 140 mm |
Centering Diameter | 114 mm |
Surface | Coated |
Weight | 13.650 kg |
Rim Hole Number | 6 -Hole |
Type | Brake Disc |
Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Connectors / Ports | 18 |
Function | Multi-Function Switch |
Placement on Vehicle | Driver side |
Combi Switch Function | Window Regulator, Door Locking, Heated wing mirror on/off |
Weight | 0.097 kg |
Type | Multi-Function Switch |
Switch Lighting | yellow |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.471 kg |
Placement on Vehicle | Front Axle Left, Lower |
Material | Aluminium |
Steering arm type | Control Arm |
Paired article numbers | 12529 |
Additional Information | with lock nut |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | without bearing, with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Clutch Release Bearing |
Weight | 0.214 kg |
Type | Clutch Release Bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Belt Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Function | V-Ribbed Belt Set |
Length | 1205 mm |
Width of castor bearing surface | 25 mm |
Number of Ribs | 6 |
Weight | 0.723 kg |
Type | V-Ribbed Belt Set |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi V-Ribbed Belt (177984)
- 1x Febi Belt Tensioner, v-ribbed belt (180107)
Important compatibility info
Material | Aluminium |
Steering arm type | Control Arm |
Paired article numbers | 12528 |
Placement on Vehicle | Front Axle Right, Lower |
Weight | 2.471 kg |
Function | Control/Trailing Arm, wheel suspension |
Additional Information | with lock nut |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with ball joint, without bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Control/Trailing Arm, wheel suspension |
Steering arm type | Control Arm |
Paired article numbers | 42108 |
Weight | 3.93 kg |
Material | Steel |
Placement on Vehicle | Front Axle Left |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Steering arm type | Control Arm |
Paired article numbers | 43082 |
Function | Control/Trailing Arm, wheel suspension |
Placement on Vehicle | Front Axle Right |
Material | Sheet Steel |
Weight | 2.72 kg |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Extra Description | Basic Short Kit |
Function | Timing Chain Kit |
Weight | 0.435 kg |
Chain Type | Simplex, Closed chain |
Number of Chain Links | 50 |
Timing Chain Size | G67HP, G67HR |
Type | Timing Chain Kit |
for OE number | 058 109 229 B S5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (25360)
- 1x Febi Tensioner, timing chain (178484)
Important compatibility info
Steering arm type | Control Arm |
Paired article numbers | 12045 |
Placement on Vehicle | Lower Front Axle, Left |
Weight | 4.000 kg |
Material | Cast Steel |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Additional Information | with rubber mounts, with holders |
Additional Information 2 | with ball joint |
Internal Thread Size | M12 x 1,25 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Bore Diameter | 10.6 mm |
Number of mounting bores | 6 |
Weight | 6.204 kg |
External Teeth, Wheel Side | 36 |
Function | Drive Shaft |
Type | Drive Shaft |
Transmission-side joint diameter | 75.6 mm |
Wheel Sided Joint Diameter | 59.5 mm |
Min. Length | 488 mm |
Placement on Vehicle | Front Axle Left |
Thread Size | M16x1,5 |
Bolt Hole Circle Diameter | 94.06 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Right |
Material | Steel |
Steering arm type | Control Arm |
Paired article numbers | 42107 |
Function | Control/Trailing Arm, wheel suspension |
Weight | 3.83 kg |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
for OE number | 16620-0Y020 |
Material | Plastic |
Outer diameter | 70 mm |
Operating Mode | Automatic |
Weight | 0.512 kg |
Type | Belt Tensioner, V-ribbed belt |
Function | Belt Tensioner, V-ribbed belt |
Width of castor bearing surface | 24 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Rotor Style | Internally Vented |
Placement on Vehicle | Front Axle |
Outer diameter | 290 mm |
Thickness | 43 mm |
Brake Disc Thickness | 26 mm |
Minimum thickness | 23 mm |
Bolt Hole Circle Diameter | 120 mm |
Surface | Coated |
Function | Brake Disc |
Centering Diameter | 102 mm |
Weight | 7.25 kg |
Type | Brake Disc Rotor |
Rim Hole Number | 10 -Hole |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.440 kg |
Colour | Black |
Number of Connectors / Ports | 10 |
Combi Switch Function | with cruise control |
Type | Steering Column Switch |
Function | Steering Column Switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Left |
Cable Length | 300 mm |
Number of circuits | 13 |
Type | Cable Repair Kit, tailgate |
Function | Cable Repair Kit, tailgate |
Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.055 kg |
Number of Connectors / Ports | 2 |
Cable Length | 380 mm |
Function | Sensor, exhaust gas temperature |
Type | Sensor, exhaust gas temperature |
External Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 3.260 kg |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Width | 55 mm |
Outer diameter | 78 mm |
Bearing Type | Angular Ball Bearing |
Inner diameter | 30 mm |
Function | Wheel Bearing Kit |
Sealing lip material | NBR (nitrile butadiene rubber) |
Type | Wheel Bearing Kit |
Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with ABS sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | with fastening material |
Function | Brake Pad Set, disc brake |
Weight | 10.04 kg |
Thickness/Strength 1 | 30 mm |
Type | Brake Pad Set, disc brake |
Inspection Tag | ECE R90 Approved |
Wear Warning Contact | prepared for wear warning indicator |
Width | 107.7 mm |
Length | 247.5 mm |
Placement on Vehicle | Rear Axle, Front Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Right |
Length | 156 mm |
Width | 160 mm |
Thickness | 124.2 mm |
Bearing/Mounting Type | Hydro Mount |
Function | Mounting, engine |
Type | Mounting, engine |
Weight | 1.98 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | after catalytic converter |
Spanner Size | 22 |
Weight | 0.118 kg |
Cable Length | 1105 mm |
Number of circuits | 4 |
Lambda Sensor | Heated, Diagnostic Probe |
Type | Oxygen Sensor |
Function | Oxygen Sensor |
External Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle |
Thickness | 48.5 mm |
Brake Disc Thickness | 22 mm |
Function | Brake Disc |
Minimum thickness | 20 mm |
Bolt Hole Circle Diameter | 112 mm |
Centering Diameter | 65 mm |
Surface | Coated |
Weight | 7.04 kg |
Number of mounting bores | 1 |
Outer diameter | 310 mm |
Rotor Style | Internally Vented |
Rim Hole Number | 5 -Hole |
Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Rim Hole Number | 5 -Hole |
Weight | 6.590 kg |
Rotor Style | Internally Vented |
Placement on Vehicle | Rear Axle |
Outer diameter | 309 mm |
Thickness | 69.8 mm |
Brake Disc Thickness | 18 mm |
Minimum thickness | 16.5 mm |
Bolt Hole Circle Diameter | 114.3 mm |
Centering Diameter | 62 mm |
Surface | Coated |
Number of mounting bores | 3 |
Type | Brake Disc Rotor |
Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.060 kg |
External Thread Size | M14 x 1,5 |
Placement on Vehicle | before soot particulate filter |
Number of Connectors / Ports | 2 |
Cable Length | 714 mm |
Function | Sensor, exhaust gas temperature |
Type | Sensor, exhaust gas temperature |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Rotor Style | Internally Vented |
Placement on Vehicle | Front Axle |
Outer diameter | 300 mm |
Thickness | 52 mm |
Brake Disc Thickness | 28 mm |
Minimum thickness | 26 mm |
Bolt Hole Circle Diameter | 108 mm |
Centering Diameter | 63.5 mm |
Surface | Coated |
Number of mounting bores | 1 |
Function | Brake Disc |
Rim Hole Number | 5 -Hole |
Weight | 9.01 kg |
Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Right |
for OE number | 11 21 065 75R |
Function | Mounting, engine |
Type | Mounting, engine |
Bearing/Mounting Type | Rubber-Metal Mount |
Weight | 1.166 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Spanner Size | 22 |
Weight | 0.108 kg |
Cable Length | 508 mm |
Number of circuits | 4 |
Lambda Sensor | Heated, Regulating Sensor |
Type | Oxygen Sensor |
Function | Oxygen Sensor |
External Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Brake Disc Rotor |
Rim Hole Number | 6 -Hole |
Brake Disc Thickness | 18 mm |
Outer diameter | 298 mm |
Function | Brake Disc |
for OE number | 910 423 21 00 07 |
Number of mounting bores | 1 |
Surface | Coated |
Weight | 7.5 kg |
Bolt Hole Circle Diameter | 130 mm |
Centering Diameter | 85 mm |
Minimum thickness | 16 mm |
Thickness | 56 mm |
Rotor Style | Solid |
Placement on Vehicle | Rear Axle |
Vehicle Equipment | for vehicles with electric parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Bolt Hole Circle Diameter | 100 mm |
Function | Wheel Hub |
Inner diameter | 25 mm |
Number of Holes | 4 |
Outer diameter | 121 mm |
Thickness | 77 mm |
Weight | 1.42 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Type | Wheel Hub |
Additional Information 2 | without wheel bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.517 kg |
Material | Cast Iron |
Type | Brake Master Cylinder |
Function | Brake Master Cylinder |
Piston Diameter | 25.4 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.19 kg |
Function | Lock Cylinder Kit |
Type | Lock Cylinder Kit |
Lock System | with two keys |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.400 kg |
Placement on Vehicle | Left Front |
Colour | Green |
Bearing/Mounting Type | Hydro Mount |
Type | Mounting, engine |
Function | Mounting, engine |
for OE number | 56 84 645 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Parts Set, maintenance service |
Type | Parts Set, maintenance service |
Weight | 5.537 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Oil Filter (27797)
- 1x Febi Oil Filter (27799)
- 1x Febi Fuel filter (35426)
- 1x Febi Fuel filter (35342)
Important compatibility info
Weight | 2.3 kg |
Placement on Vehicle | Rear Axle Left |
Type | Repair Kit, brake caliper |
Function | Repair Kit, brake caliper |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.3 kg |
Placement on Vehicle | Rear Axle Right |
Type | Repair Kit, brake caliper |
Function | Repair Kit, brake caliper |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.19 kg |
Placement on Vehicle | both sides |
Bearing/Mounting Type | Hydro Mount |
Function | Mounting, engine |
Type | Mounting, engine |
Additional Information 2 | with splash protection cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023