invoice Page 1420 of 1907
Results 28381 - 28400 of 38124
Part number: 46775
Please enter your vehicle information above to check this fits your vehicle!
Weight 0.261 kg
Number of Connectors / Ports 3
Function Ignition Coil
Type Ignition Coil

Additional Information

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

Febi 46775 Ignition Coil
ONLY
£58.20
Quantity:
Please enter your vehicle information above to check this fits your vehicle!
External Thread Size M10 x 1,25
Placement on Vehicle Front
Operating Mode Mechanical
Shock Absorber Mounting Type Top pin, Bottom eye
Max. Length 258 mm
Min. Length 203 mm
Pipe Diameter 49 mm. 60 mm
Mounting points diameter 30 mm
Piston conrod diameter 14 mm
Function Shock Absorber, driver cab suspension
Weight 2.0 kg
Type Shock Absorber, driver cab suspension

Additional Information

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

Febi 106619 Cab Suspension Shock Absorber
ONLY
£58.20
Quantity:
Please enter your vehicle information above to check this fits your vehicle!
Additional Information with rubber mounts
Placement on Vehicle Front Axle Right
Material Steel
Steering arm type Control Arm
Paired article numbers 173551
Cone Size 17 mm
Type Control/Trailing Arm, wheel suspension
Function Control/Trailing Arm, wheel suspension
Weight 4.51 kg
Additional Information 2 with ball joint

Additional Information

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

Febi 173552 Wishbone / Suspension Arm
ONLY
£58.20
Quantity:
Part number: 32806
Please enter your vehicle information above to check this fits your vehicle!
Weight 1.724 kg
Internal Thread Size M12 x 1,5
Placement on Vehicle Rear Axle
Outer diameter 145 mm. 45 mm
Thickness 67 mm
Number of Holes 6
Number of Teeth 30
Function Wheel Hub
Type Wheel Hub
Additional Information 2 without wheel bearing

Additional Information

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

Febi 32806 Wheel Hub
ONLY
£58.20
Quantity:
Part number: 192948
Additional Information with adjuster
Weight 0.40 kg
Type Tailgate Lock
Function Tailgate Lock
Extra Description febi Plus

Additional Information

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

Febi 192948 Tailgate Lock
ONLY
£58.20
Quantity:
Part number: 11723
Please enter your vehicle information above to check this fits your vehicle!
Weight 4.650 kg
Width 18.5 mm
Outer diameter 485.5 mm
Inner diameter 432 mm
Number of Teeth 160
Type Ring Gear, flywheel
Function Ring Gear, flywheel

Additional Information

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

Febi 11723 Starter Ring Gear
ONLY
£58.20
Quantity:
Please enter your vehicle information above to check this fits your vehicle!
Weight 3.295 kg
Placement on Vehicle Front Axle Right, Lower
Material Cast Steel
Steering arm type Control Arm
Paired article numbers 39644
Function Control/Trailing Arm, wheel suspension
Extra Description ProKit
Type Control/Trailing Arm, wheel suspension
Additional Information 2 with ball joint, with screw, with bearing
Additional Information with lock nut

Additional Information

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

  • 1x Febi Control/Trailing Arm, wheel suspension (39628)
  • 1x Febi Nut, ball joint (21884)
  • 1x Febi Screw (39229)
Febi 39645 Wishbone / Suspension Arm
ONLY
£58.20
Quantity:
Please enter your vehicle information above to check this fits your vehicle!
Weight 5.2 kg
Placement on Vehicle Front Axle
Shock Absorber Type Oil Pressure
Shock Absorber Mounting Type Top eye, Bottom eye
Max. Length 760 mm
Min. Length 474 mm
Pipe Diameter 76 mm. 63 mm
Mounting points diameter 20 mm
Piston conrod diameter 20 mm
Function Shock Absorber
Shock Absorber Design Telescopic Shock Absorber
Type Shock Absorber

Additional Information

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

Febi 20567 Shock Absorber (Single)
ONLY
£58.20
Quantity:
Part number: 18789
Please enter your vehicle information above to check this fits your vehicle!
Housing material Aluminium
Function Belt Tensioner, v-ribbed belt
Track rollers material Plastic
Operating Mode Automatic
Outer diameter 75 mm
Weight 1.201 kg
Type Belt Tensioner, v-ribbed belt
Width of castor bearing surface 38 mm

Additional Information

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

Febi 18789 Aux Belt Tensioner
ONLY
£58.20
Quantity:
Please enter your vehicle information above to check this fits your vehicle!
Placement on Vehicle Front and Rear, both sides
Weight 0.43 kg
Type Air Suspension Valve
Function Air Suspension Valve
Replaces 15496
Additional Information with fastening/mounting material

Additional Information

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

  • 1x Febi Air Suspension Valve (23563)
  • 1x Febi Mounting Set, driver cab suspension valve (29313)
Febi 28578 Suspension Level Valve
ONLY
£58.20
Quantity:
Part number: 103157
Please enter your vehicle information above to check this fits your vehicle!
Weight 0.427 kg
Material EPDM (ethylene propylene diene Monomer (M-class) rubber)
Cooling Hose from heat exchanger to engine
Hose Length 950 mm
Function Radiator Hose
Additional Information 2 with quick couplers
Type Radiator Hose

Additional Information

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

Febi 103157 Radiator Hose
ONLY
£58.20
Quantity:
Part number: 104744
Please enter your vehicle information above to check this fits your vehicle!
Length 245 mm
Outer diameter 165 mm
Number of Coils 5
Function Suspension Spring
Placement on Vehicle Rear Axle
Weight 4.67 kg
Wire Diameter 20 mm
Type Suspension Spring

Additional Information

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

Febi 104744 Coil Spring
ONLY
£58.20
Quantity:
Part number: 186435
Please enter your vehicle information above to check this fits your vehicle!
Bolt Hole Circle Diameter 78 mm
External Teeth, Wheel Side 36
Weight 4.880 kg
Wheel Sided Joint Diameter 81 mm
Min. Length 556 mm
Additional Information with grease
Placement on Vehicle Front Axle Left
Transmission-side joint diameter 94 mm
Bore Diameter 8.5 mm
Number of mounting bores 6
Function Drive Shaft
Type Drive Shaft
External Thread Size M20 x 1,5

Additional Information

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

Febi 186435 Drive Shaft
ONLY
£58.20
Quantity:
Part number: 186596
Please enter your vehicle information above to check this fits your vehicle!
Placement on Vehicle Front Axle Left
Thread Size M20x1,5
External Teeth, Wheel Side 25
Weight 6.381 kg
External Teeth, Diff.Side 39
Min. Length 642 mm
Wheel Sided Joint Diameter 84 mm
Transmission-side joint diameter 82 mm
Type Drive Shaft
Function Drive Shaft

Additional Information

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

Febi 186596 Drive Shaft
ONLY
£58.20
Quantity:
Part number: 177687
Please enter your vehicle information above to check this fits your vehicle!
Width of castor bearing surface 38 mm
Operating Mode Automatic
Weight 1.350 kg
Outer diameter 70 mm
Width 100 mm
Material Metal
Type Belt Tensioner, V-ribbed belt
Function Belt Tensioner, V-ribbed belt

Additional Information

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

Febi 177687 Aux Belt Tensioner
ONLY
£58.20
Quantity:
Please enter your vehicle information above to check this fits your vehicle!
Placement on Vehicle Front
Operating Mode Mechanical
Weight 3.5 kg
Shock Absorber Mounting Type Top eye, Bottom eye
Min. Length 282 mm
Pipe Diameter 38 mm
Mounting points diameter 25 mm. 14 mm
Piston conrod diameter 13 mm
Type Shock Absorber, driver cab suspension
Function Shock Absorber, driver cab suspension

Additional Information

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

Febi 102004 Cab Suspension Shock Absorber
ONLY
£58.20
Quantity:
Part number: 10917
Weight 0.52 kg
Outer diameter 44 mm
Length 180 mm
Type Slave Cylinder, engine brake
Function Slave Cylinder, engine brake
External Thread Size M8 x 1

Additional Information

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

Febi 10917 Air Cylinder
ONLY
£58.20
Quantity:
Please enter your vehicle information above to check this fits your vehicle!
Weight 3.106 kg
Type Release Fork, clutch
Function Release Fork, clutch
for OE number 74 21 362 933 S2
Additional Information with bush, with fastening/mounting material

Additional Information

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

Febi 179643 Clutch Release Fork / Lever
ONLY
£58.20
Quantity:
Please enter your vehicle information above to check this fits your vehicle!
External Thread Size M12 x 1,25
Weight 4.035 kg
Placement on Vehicle Front Axle Right, Lower
Material Sheet Steel
Additional Information 2 with ball joint
Steering arm type Control Arm
Paired article numbers 174228
Cone Size 24 mm
Type Control/Trailing Arm, wheel suspension
Function Control/Trailing Arm, wheel suspension
Additional Information with rubber mounts, with lock nut

Additional Information

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

Febi 174229 Wishbone / Suspension Arm
ONLY
£58.20
Quantity:
Please enter your vehicle information above to check this fits your vehicle!
Placement on Vehicle Front Axle Right, Lower, outer
Additional Information with rubber mounts
Material Sheet Steel
Additional Information 2 with ball joint
Steering arm type Control Arm
Paired article numbers 193702
Weight 2.302 kg
Cone Size 18 mm
Type Control/Trailing Arm, wheel suspension
Function Control/Trailing Arm, wheel suspension

Additional Information

General Information

These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

Febi 193701 Wishbone / Suspension Arm
ONLY
£58.20
Quantity:

Featured brands
NAPA
Borg & Beck
Febi
Gates
Bosch
Blue Print
Reviews

All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....


RS
R S
Sept 2023

A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......


MT
Mark T
Sept 2023

First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.


GR
Graham P
Sept 2023

Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.


DP
David P
Aug 2023

Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....


DB
Daniel B
Aug 2023