Proud to be a UK-based company
Contact us
Important compatibility info
| Weight | 1.634 kg |
| Additional Information | with gasket/seal |
| Material | Cast Aluminium |
| Number of Wings | 6 |
| Type | Water Pump, engine cooling |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Plastic |
| Seal Material | Rubber/Metal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£60.18
Important compatibility info
| Function | Cable Pull, manual transmission |
| Type | Cable Pull, manual transmission |
| Weight | 0.470 kg |
| Outer length 1 | 1007 mm |
| Inner length 1 | 720 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£60.18
Important compatibility info
| Opening Temperature | 86 °C |
| Function | Thermostat, coolant |
| Weight | 0.340 kg |
| Type | Thermostat, coolant |
| Additional Information 2 | with seal ring |
| for OE number | 22820752 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£60.18
Important compatibility info
| Additional Information 2 | with ball joint, with rubber mount |
| External Thread Size | M14 x 1,5 |
| Weight | 2.35 kg |
| Placement on Vehicle | Front Axle Left, Lower, Rear |
| Material | Aluminium |
| Steering arm type | Control Arm |
| Paired article numbers | 170529 |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£60.18
Important compatibility info
| Function | Window Regulator |
| Weight | 0.54 kg |
| Type | Window Regulator |
| Operating Mode | Electric |
| Additional Information | without electric motor |
| Paired article numbers | 176631 |
| Placement on Vehicle | Right Rear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£60.18
Important compatibility info
| Voltage | 12 V |
| Number of Connectors / Ports | 2 |
| Weight | 0.189 kg |
| Type | Pressure converter, turbocharger |
| Function | Pressure converter, turbocharger |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£60.18
Important compatibility info
| Number of Connectors / Ports | 18 |
| Function | Multi-Function Switch |
| Placement on Vehicle | Driver side |
| Combi Switch Function | Window Regulator, Door Locking, Heated wing mirror on/off |
| Weight | 0.097 kg |
| Type | Multi-Function Switch |
| Switch Lighting | yellow |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£60.18
Important compatibility info
| Placement on Vehicle | Left Front |
| Additional Information | without electric motor |
| Operating Mode | Electric |
| Paired article numbers | 194041 |
| Weight | 1.1 kg |
| Type | Window Regulator |
| Function | Window Regulator |
| Number of Doors | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£60.18
Important compatibility info
| Hole Spacing | 340 mm |
| Type | Link/Coupling Rod, stabiliser bar |
| Placement on Vehicle | Rear Axle, Rear Axle Left, Rear Axle Right |
| Function | Link/Coupling Rod, stabiliser bar |
| Length | 340 mm |
| Diameter | 125 mm |
| Thickness | 35 mm |
| Rod/Strut | Coupling Rod |
| Bore Diameter | 75 mm |
| Weight | 4.300 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£60.18
Important compatibility info
| Weight | 0.7 kg |
| Placement on Vehicle | Front Axle |
| Inner diameter | 12 mm |
| Function | Repair Kit, suspension strut support mount |
| Extra Description | ProKit |
| Type | Repair Kit, suspension strut support mount |
| Additional Information 2 | with fastening material, with ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Repair Kit, suspension strut support mount (12081)
- 3x Febi Nut (38061)
- 3x Febi Springwasher (38063)
- 3x Febi Washer (38062)
- 1x Febi Nut (38108)
£60.18
Important compatibility info
| Weight | 4.176 kg |
| Placement on Vehicle | Front Axle |
| Length | 725 mm |
| Outer diameter | 36 mm |
| Rod/Strut | Push Rod |
| Driver Position | for right-hand drive vehicles |
| Thread Type | with right-hand thread |
| External Thread Size | M18 x 1,5 |
| Pipe Diameter | 36 mm |
| Cone Size | 22 mm |
| Function | Centre Rod Assembly |
| Internal Thread Size | M30 x 1,5 RHT |
| Extra Description | ProKit |
| Type | Centre Rod Assembly |
| Additional Information | with castellated nut and split pins |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£60.18
Important compatibility info
| Weight | 6.455 kg |
| Length | 858 mm |
| Rod/Strut | Push Rod |
| Cone Size | 28 mm |
| Pipe Diameter | 42 mm |
| Function | Centre Rod Assembly |
| Extra Description | ProKit |
| Internal Thread Size | M30 x 1,5 RHT |
| Type | Centre Rod Assembly |
| External Thread Size | M20 x 1,5 |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£60.18
Important compatibility info
| Number of hoses | 2 |
| for OE number | 06H 103 495 AJ S1 |
| Weight | 0.528 kg |
| Additional Information | with venting hoses |
| Material | Plastic |
| Colour | Black |
| Extra Description | febi Plus |
| Type | Oil Separator, crankcase ventilation |
| Function | Oil Separator, crankcase ventilation |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Oil Separator, crankcase ventilation (176317)
- 1x Febi Hose, crankcase ventilation (170861)
- 1x Febi Hose, crankcase ventilation (170674)
£60.18
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Material | Cast Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 184517 |
| Additional Information | with rubber mounts |
| Weight | 4.8 kg |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£60.18
Important compatibility info
| Weight | 0.178 kg |
| Type | Control Valve, camshaft adjustment |
| Function | Control Valve, camshaft adjustment |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£60.18
Important compatibility info
| Weight | 0.410 kg |
| Type | Oil Separator, crankcase ventilation |
| for OE number | 996 107 023 04 |
| Function | Oil Separator, crankcase ventilation |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£60.18
Important compatibility info
| Material | Metal |
| Outer diameter | 70 mm |
| Inner diameter | 14 mm |
| Width | 52 mm |
| Type | Deflection/Guide Pulley, v-ribbed belt |
| Mounting points diameter | 10 mm |
| Weight | 0.497 kg |
| Function | Deflection/Guide Pulley, v-ribbed belt |
| Width of castor bearing surface | 29 mm |
| Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£60.18
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Material | Cast Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 26646 |
| Mounting points diameter | 12 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Weight | 4.310 kg |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with rubber mounts, with holders |
| Additional Information 2 | with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£60.18
Important compatibility info
| Weight | 1.400 kg |
| Placement on Vehicle | Left Front |
| Colour | Green |
| Bearing/Mounting Type | Hydro Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
| for OE number | 56 84 645 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£60.19
Important compatibility info
| Weight | 0.777 kg |
| Function | Charge Air Hose |
| Placement on Vehicle | Left |
| Type | Charge Air Hose |
| Turbocharger line | Charge air cooler to intake manifold |
| Additional Information 2 | with quick couplers |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£60.19
Important compatibility info
| Length | 243 mm |
| Height | 63 mm |
| Width | 179 mm |
| Filter type | Filter Insert |
| Weight | 0.22 kg |
| Type | Air Filter |
| Function | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£60.19
Important compatibility info
| Weight | 1.918 kg |
| Placement on Vehicle | Right |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
| for OE number | 1K0 199 262 AM |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£60.20
Important compatibility info
| Length | 134 mm |
| Function | Sensor, pneumatic suspension level |
| Internal Thread Size | M6 |
| Type | Sensor, pneumatic suspension level |
| Width | 66 mm |
| Thickness | 47 mm |
| Mounting points diameter | 9 mm |
| Number of Connectors / Ports | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£60.20
Important compatibility info
| Weight | 5.67 kg |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 300 mm |
| Thickness | 68.5 mm |
| Brake Disc Thickness | 12 mm |
| Bolt Hole Circle Diameter | 120 mm |
| Surface | Coated |
| Function | Brake Disc |
| Rotor Style | Solid |
| Rim Hole Number | 5 -Hole |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£60.22
Important compatibility info
| Placement on Vehicle | Front Axle |
| Outer diameter | 282 mm |
| Thickness | 46 mm |
| Brake Disc Thickness | 25 mm |
| Minimum thickness | 22 mm |
| Bolt Hole Circle Diameter | 114.3 mm |
| Centering Diameter | 62 mm |
| Surface | Coated |
| Weight | 6.9 kg |
| Function | Brake Disc |
| Rotor Style | Internally Vented |
| Rim Hole Number | 5 -Hole |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£60.22
Important compatibility info
| Weight | 6.85 kg |
| Rotor Style | internally vented |
| Rim Hole Number | 5 -Hole |
| Placement on Vehicle | Front Axle |
| Outer diameter | 280 mm |
| Thickness | 44 mm |
| Brake Disc Thickness | 24 mm |
| Minimum thickness | 22 mm |
| Bolt Hole Circle Diameter | 114.3 mm |
| Centering Diameter | 68 mm |
| Surface | Coated |
| Number of mounting bores | 2 |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£60.22
Important compatibility info
| Bearing/Mounting Type | Rubber-Metal Mount |
| Placement on Vehicle | Rear |
| Weight | 0.494 kg |
| for OE number | 51728302 |
| Type | Mounting, engine |
| Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£60.23
Important compatibility info
| Type | Air Suspension Valve |
| Weight | 0.5 kg |
| Function | Air Suspension Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£60.23
Important compatibility info
| Width of castor bearing surface | 25.5 mm |
| Track rollers material | Plastic |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Operating Mode | Automatic |
| Outer diameter | 55 mm |
| Weight | 0.560 kg |
| Type | Belt Tensioner, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£60.24
Important compatibility info
| Weight | 0.172 kg |
| Surface | Rubberized |
| Width | 25 mm |
| Function | Timing Belt |
| Number of Teeth | 149 |
| Type | Timing Belt |
| Belt Material | HNBR (hydrogenated nitrile butadiene rubber) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£60.25
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023