Important compatibility info
Placement on Vehicle | Front Axle Left |
Thread Size | M20x1,5 |
External Teeth, Wheel Side | 25 |
Weight | 6.381 kg |
External Teeth, Diff.Side | 39 |
Min. Length | 642 mm |
Wheel Sided Joint Diameter | 84 mm |
Transmission-side joint diameter | 82 mm |
Type | Drive Shaft |
Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.49 kg |
Material | Cast Aluminium |
Number of Wings | 7 |
Type | Water Pump, engine cooling |
Function | Water Pump, engine cooling |
Water pump impeller material | Plastic |
Seal Material | Paper |
Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Paired article numbers | 19121 |
Weight | 4.100 kg |
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Steering arm type | Control Arm |
Additional Information 2 | without ball joint |
Material | Cast Steel |
Additional Information | with holder, with rubber mounts |
Placement on Vehicle | Front Axle Right, Lower |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 5.2 kg |
Placement on Vehicle | Front Axle |
Shock Absorber Type | Oil Pressure |
Shock Absorber Mounting Type | Top eye, Bottom eye |
Max. Length | 760 mm |
Min. Length | 474 mm |
Pipe Diameter | 76 mm. 63 mm |
Mounting points diameter | 20 mm |
Piston conrod diameter | 20 mm |
Function | Shock Absorber |
Shock Absorber Design | Telescopic Shock Absorber |
Type | Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.52 kg |
Outer diameter | 44 mm |
Length | 180 mm |
Type | Slave Cylinder, engine brake |
Function | Slave Cylinder, engine brake |
External Thread Size | M8 x 1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Repair Kit, kingpin |
Placement on Vehicle | Front Axle Left, Lower, Front Axle Right |
Length | 126 mm |
Outer diameter | 54 mm. 50 mm |
Weight | 2.028 kg |
Extra Description | ProKit |
Type | Repair Kit, kingpin |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Seal Ring, steering knuckle (03028)
- 1x Febi Lock Ring, steering knuckle (05880)
- 1x Febi Circlip (06065)
- 1x Febi Seal Ring, steering knuckle (26286)
- 2x Febi Bush, steering knuckle (15858)
- 1x Febi Kingpin (26289)
Important compatibility info
Additional Information | with adjuster |
Weight | 0.40 kg |
Type | Tailgate Lock |
Function | Tailgate Lock |
Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | transmission sided, Rear Axle Left, Rear Axle Right |
Weight | 2.960 kg |
External Teeth, Diff.Side | 29 |
Int. teeth, diff.side, conn.to transm. | 35 |
Type | Joint Kit, drive shaft |
Function | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.092 kg |
Opening Temperature | 82 °C |
Housing Type | with housing |
Type | Thermostat, coolant |
Function | Thermostat, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.967 kg |
Type | Dryer, air conditioning |
Function | Dryer, air conditioning |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.160 kg |
Number of Wings | 7 |
Type | Water Pump, engine cooling |
Function | Water Pump, engine cooling |
Water pump impeller material | Metal |
Seal Material | Rubber |
Material | Cast Aluminium |
Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Brake Caliper |
Placement on Vehicle | Rear Axle Left |
Material | Cast Iron |
Brake Caliper Type | Brake Caliper (1 piston) |
Paired article numbers | 179491 |
Weight | 1.462 kg |
Function | Brake Caliper |
Brake caliper piston diameter | 34 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with lock nut |
Weight | 4.43 kg |
Placement on Vehicle | Front, Front Axle Left |
Material | Cast Steel |
Inner diameter | 12 mm |
Steering arm type | Control Arm |
Paired article numbers | 36838 |
External Thread Size | M14 x 1,5 |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with bearing, with ball joint |
Cone Size 2 | 24 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Mounting, control/trailing arm (36827)
- 1x Febi Nut (36331)
Important compatibility info
Length | 59 mm |
Spanner Size | 27 |
Number of Connectors / Ports | 3 |
Function | Sensor, oil pressure |
Screw length below head | 12 mm |
Weight | 0.112 kg |
External Thread Size | M18 x 1,5 |
Colour | Black |
Type | Sensor, oil pressure |
for OE number | 51.27421.0262 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Housing length | 203 mm |
Function | Gas Spring, bonnet |
Type | Gas Spring, bonnet |
Piston conrod diameter | 8 mm |
Mounting points diameter | 17.8 mm |
Stroke | 130 mm |
Eject Force | 295 N |
Housing Diameter | 18 mm |
Weight | 0.2 kg |
Additional Information | Change interval/date according to gas spring imprint |
Length | 364 mm |
Placement on Vehicle | both sides |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Sheet Steel |
Placement on Vehicle | Front Axle Left, Lower |
Function | Control/Trailing Arm, wheel suspension |
Steering arm type | Control Arm |
Paired article numbers | 34224 |
Weight | 3.841 kg |
Extra Description | ProKit |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with rubber mount, with ball joint |
Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (23797)
Important compatibility info
Type | Brake Caliper |
Placement on Vehicle | Rear Axle Right |
Material | Cast Iron |
Brake Caliper Type | Brake Caliper (1 piston) |
Paired article numbers | 179489 |
Weight | 1.462 kg |
Function | Brake Caliper |
Brake caliper piston diameter | 34 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with lock nut |
Weight | 3.295 kg |
Placement on Vehicle | Front Axle Left, Lower |
Material | Cast Steel |
Steering arm type | Control Arm |
Paired article numbers | 39645 |
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Extra Description | ProKit |
Additional Information 2 | with screw, with ball joint, with bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (39627)
- 1x Febi Nut, ball joint (21884)
- 1x Febi Screw (39229)
Important compatibility info
Weight | 0.984 kg |
Placement on Vehicle | Front |
Bolt Hole Circle Diameter | 90 mm |
Function | Joint, propshaft |
Additional Information | with nuts |
Outer diameter | 140 mm |
Thickness | 24 mm |
Additional Information 2 | with bolts/screws, with washers |
Inner diameter | 41 mm |
Extra Description | ProKit |
Type | Joint, propshaft |
Number of Holes | 6 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 3x Febi Screw (03931)
- 3x Febi Bolt, drive shaft flange (03934)
- 1x Febi Assembly Kit, propshaft joint (22117)
Important compatibility info
Length | 215 mm |
Height | 24 mm |
Width | 105 mm |
Number of mounting bores | 6 |
Mounting points diameter | 9.2 mm |
Function | Thermostat Housing |
Additional Information | with gasket/seal |
Weight | 0.415 kg |
Type | Thermostat Housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Thermostat Housing (104963)
- 1x Febi Gasket, thermostat housing (107781)
Important compatibility info
Weight | 1.140 kg |
External Thread Size | M12 x 1,25 |
Length | 619 mm |
Placement on Vehicle | Front Axle, Centre |
Function | Tie Rod |
Type | Tie Rod |
Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Window Regulator |
Type | Window Regulator |
Weight | 1.5 kg |
Paired article numbers | 175794 |
Operating Mode | Electric |
Additional Information | without electric motor |
Placement on Vehicle | Left Front |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Screw length below head | 245 mm |
Number of Teeth | 26 |
Length | 296 mm |
Outer diameter | 98 mm |
Function | Brake Shaft, drum brake |
Type | Brake Shaft, drum brake |
Weight | 3.633 kg |
Paired article numbers | 179425 |
Placement on Vehicle | Left Front |
Brake Shaft Cam | S-cam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Pipe Diameter | 40 mm |
Function | Centre Rod Assembly |
Colour | red/brown |
Length | 822 mm |
Outer diameter | 40 mm |
Rod/Strut | Push Rod |
Placement on Vehicle | Front Axle |
Weight | 6.200 kg |
Cone Size | 26 mm |
Driver Position | for left-hand/right-hand drive vehicles |
Extra Description | ProKit |
Internal Thread Size | M30 x 1,5 |
External Thread Size | M20 x 1,5 |
Type | Centre Rod Assembly |
Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Drive Shaft |
Placement on Vehicle | Front Axle Left |
Additional Information 2 | with nut |
External Teeth, Wheel Side | 36 |
Weight | 5.000 kg |
Min. Length | 546 mm |
Wheel Sided Joint Diameter | 89 mm |
Transmission-side joint diameter | 107.7 mm |
Type | Drive Shaft |
External Thread Size | M20 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front and Rear, both sides |
Weight | 0.43 kg |
Type | Air Suspension Valve |
Function | Air Suspension Valve |
Replaces | 15496 |
Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Air Suspension Valve (23563)
- 1x Febi Mounting Set, driver cab suspension valve (29313)
Important compatibility info
Weight | 0.31 kg |
Width of castor bearing surface | 25 mm |
Material | Metal |
Outer diameter | 70 mm |
Type | Deflection/Guide Pulley, v-ribbed belt |
Function | Deflection/Guide Pulley, v-ribbed belt |
Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Track rollers material | Plastic |
Outer diameter | 75 mm |
Operating Mode | Mechanical |
Housing material | Aluminium |
Function | Belt Tensioner, v-ribbed belt |
Weight | 1.5 kg |
Width of castor bearing surface | 33 mm |
Type | Belt Tensioner, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.93 kg |
Length | 800 mm |
Width | 250 mm |
Material | Rubber |
Thickness | 30 mm |
Function | Gasket, oil sump |
Type | Gasket, oil sump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Brake Shaft, drum brake |
Outer diameter | 98 mm |
Number of Teeth | 26 |
Length | 296 mm |
Screw length below head | 245 mm |
Weight | 3.633 kg |
Type | Brake Shaft, drum brake |
Placement on Vehicle | Right Front |
Paired article numbers | 179423 |
Brake Shaft Cam | S-cam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Housing material | Aluminium |
Function | Belt Tensioner, v-ribbed belt |
Track rollers material | Plastic |
Operating Mode | Automatic |
Outer diameter | 75 mm |
Weight | 1.201 kg |
Type | Belt Tensioner, v-ribbed belt |
Width of castor bearing surface | 38 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M10 x 1,25 |
Placement on Vehicle | Front |
Operating Mode | Mechanical |
Shock Absorber Mounting Type | Top pin, Bottom eye |
Max. Length | 258 mm |
Min. Length | 203 mm |
Pipe Diameter | 49 mm. 60 mm |
Mounting points diameter | 30 mm |
Piston conrod diameter | 14 mm |
Function | Shock Absorber, driver cab suspension |
Weight | 2.0 kg |
Type | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Parameter | 5PK |
Function | Belt Pulley, crankshaft |
Outer diameter | 155 mm |
Inner diameter | 18 mm |
Weight | 1.595 kg |
Additional Information 2 | with screw |
Number of Ribs | 4 |
Width | 22 mm |
Extra Description | ProKit |
Type | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Belt Pulley, crankshaft (26367)
- 1x Febi Centering Bolt, crankshaft pulley (33529)
Important compatibility info
Placement on Vehicle | Charge Air Cooler, Left |
Height | 145 mm |
Width | 290 mm |
Additional Information 2 | with clamps |
Inner diameter 1 | 49 mm |
Inner diameter 2 | 66 mm |
Weight | 1.368 kg |
Type | Charge Air Hose |
Hose Length | 690 mm |
Function | Charge Air Hose |
Turbocharger line | Piping to charge air cooler |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.97 kg |
Function | Control/Trailing Arm, wheel suspension |
Paired article numbers | 33366 |
Steering arm type | Control Arm |
Material | Aluminium |
Placement on Vehicle | Front Axle Right, Lower, Rear |
Additional Information | with fastening/mounting material |
Extra Description | ProKit |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with rubber mount, with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (21198)
- 1x Febi Mounting and Bolting Kit, control/trailing arm (33201)
Important compatibility info
Weight | 3.03 kg |
Type | Hub, crankshaft |
Function | Hub, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.545 kg |
Inner diameter | 38 mm |
Inner diameter 1 | 42 mm |
Inner diameter 2 | 51 mm |
Type | Charge Air Hose |
Function | Charge Air Hose |
Inner diameter 3 | 51 mm |
Additional Information 2 | with clamps |
Number of hoses | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Aluminium |
Steering arm type | Control Arm |
Paired article numbers | 28369 |
Placement on Vehicle | Front Axle Left, Upper |
Weight | 1.245 kg |
Function | Control/Trailing Arm, wheel suspension |
Additional Information | with lock nut, with rubber mounts |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front |
Operating Mode | Mechanical |
Weight | 3.5 kg |
Shock Absorber Mounting Type | Top eye, Bottom eye |
Min. Length | 282 mm |
Pipe Diameter | 38 mm |
Mounting points diameter | 25 mm. 14 mm |
Piston conrod diameter | 13 mm |
Type | Shock Absorber, driver cab suspension |
Function | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Teeth, Wheel Side | 36 |
Thread Size | M16 x 1,5 |
Additional Information 2 | with bolts/screws |
Transmission-side joint diameter | 107.8 mm |
Type | Drive Shaft |
Function | Drive Shaft |
Placement on Vehicle | Front Axle Right |
Weight | 8.098 kg |
Min. Length | 794 mm |
Wheel Sided Joint Diameter | 90.9 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 3.106 kg |
Type | Release Fork, clutch |
Function | Release Fork, clutch |
for OE number | 74 21 362 933 S2 |
Additional Information | with bush, with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Filter type | Screen Filter |
Function | Hydraulic Filter Kit, automatic transmission |
Weight | 0.630 kg |
Length | 253 mm |
Height | 80 mm |
Width | 207 mm |
Type | Hydraulic Filter Kit, automatic transmission |
Additional Information | with gasket/seal |
Additional Information 2 | with bolts/screws |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.049 kg |
Colour | Orange |
Placement on Vehicle | Right Exterior Mirror |
Length | 58 mm |
Height | 64 mm |
Width | 90 mm |
Paired article numbers | 107877 |
Type | Auxiliary Direction Indicator |
Function | Auxiliary Direction Indicator |
Extra Description | febi Plus |
Light Design | Halogen |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Voltage | 12 V |
Driver Position | for right-hand drive vehicles |
Weight | 1.7 kg |
Type | Interior Blower |
Function | Interior Blower |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | Wheel Bearing integrated into wheel hub |
Bearing Type | Angular Ball Bearing |
Weight | 3.416 kg |
Bolt Hole Circle Diameter | 114.3 mm |
Inner diameter | 26 mm |
Outer diameter | 84 mm |
Width | 62 mm |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Function | Wheel Bearing Kit |
Type | Wheel Bearing Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.112 kg |
Number of Connectors / Ports | 14 |
Combi Switch Function | with cruise control, with indicator function, with high beam function |
Type | Steering Column Switch |
Function | Steering Column Switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.58 kg |
Housing Diameter | 55 mm |
Function | Slave Cylinder, engine brake |
Pressure side external thread size | M10 x 1,5 |
Housing length | 181.5 mm |
Pressure side internal thread size | M12 x 1,5 |
Type | Slave Cylinder, engine brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Control/Trailing Arm, wheel suspension |
Replaces | 19123 |
Paired article numbers | 19120 |
Additional Information | with holder, with rubber mounts |
Weight | 4.100 kg |
Type | Control/Trailing Arm, wheel suspension |
Steering arm type | Control Arm |
Additional Information 2 | without ball joint |
Material | Cast Steel |
Placement on Vehicle | Front Axle Left, Lower |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with gaskets/seals |
Material | Cast Aluminium |
Weight | 2.460 kg |
Type | Water Pump, engine cooling |
Function | Water Pump, engine cooling |
Water pump impeller material | Metal |
Seal Material | Paper |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M12 x 1,25 |
Weight | 4.035 kg |
Placement on Vehicle | Front Axle Right, Lower |
Material | Sheet Steel |
Additional Information 2 | with ball joint |
Steering arm type | Control Arm |
Paired article numbers | 174228 |
Cone Size | 24 mm |
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Additional Information | with rubber mounts, with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023