Important compatibility info
Weight | 1.63 kg |
Outer diameter | 314 mm |
Voltage | 12 V |
Function | Fan, engine cooling |
Type | Fan, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Min. Length | 535 mm |
External Teeth, Wheel Side | 38 |
Number of mounting bores | 6 |
Wheel Sided Joint Diameter | 98 mm |
Transmission-side joint diameter | 107.9 mm |
Thread Size | M16x1,5 |
Bolt Hole Circle Diameter | 94.2 mm |
Additional Information 2 | with screw |
Bore Diameter | 10.65 mm |
Weight | 6.610 kg |
Additional Information | with grease |
Type | Drive Shaft |
Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Centre Rod Assembly |
Cone Size | 17.8 mm |
Weight | 3.201 kg |
Function | Centre Rod Assembly |
Placement on Vehicle | Front Axle, Centre |
Rod/Strut | Push Rod |
Driver Position | for right-hand drive vehicles |
External Thread Size | M12 x 1,25 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Silicone, EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Weight | 0.43 kg |
Type | Charge Air Hose |
Function | Charge Air Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 4.000 kg |
Placement on Vehicle | Lower Front Axle, Right |
Steering arm type | Control Arm |
Paired article numbers | 12044 |
Material | Cast Steel |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Additional Information | with rubber mounts, with holders |
Additional Information 2 | with ball joint |
Internal Thread Size | M12 x 1,25 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Rotor Style | Internally Vented |
Placement on Vehicle | Front Axle |
Outer diameter | 290 mm |
Thickness | 43 mm |
Brake Disc Thickness | 26 mm |
Minimum thickness | 23 mm |
Bolt Hole Circle Diameter | 120 mm |
Surface | Coated |
Function | Brake Disc |
Centering Diameter | 102 mm |
Weight | 7.25 kg |
Type | Brake Disc Rotor |
Rim Hole Number | 10 -Hole |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | with rolling bearing |
Inner diameter | 55 mm |
Hole Spacing | 185 mm |
Bearing Type | Rolling Bearing |
Type | Suspension, propshaft |
Function | Suspension, propshaft |
Height | 154 mm |
Length | 231 mm |
Weight | 1.937 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Weight | 2.956 kg |
Steering arm type | Control Arm, Four-Point Link (CV) |
Additional Information 2 | with ball joint |
Material | Sheet Steel |
Placement on Vehicle | Front Axle Right, Lower |
Cone Size | 17 mm |
Paired article numbers | 175414 |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.540 kg |
Additional Information | with gaskets/seals |
Material | Cast Aluminium |
Additional Information 2 | with seal ring |
Number of Wings | 6 |
Type | Water Pump, engine cooling |
Function | Water Pump, engine cooling |
Water pump impeller material | Metal |
Seal Material | Rubber |
Heating / Cooling | for vehicles with oil cooler |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.471 kg |
Placement on Vehicle | Front Axle Left, Lower |
Material | Aluminium |
Steering arm type | Control Arm |
Paired article numbers | 12529 |
Additional Information | with lock nut |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | without bearing, with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.86 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 252 mm |
Additional Information | with counter nut |
Function | Inner Tie Rod |
Extra Description | ProKit |
Type | Inner Tie Rod |
External Thread Size | M18 x 1,5 |
Internal Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Housing length | 356.5 mm |
Function | Gas Spring, boot/cargo area |
Type | Gas Spring, boot/cargo area |
Piston conrod diameter | 10 mm |
Mounting points diameter | 18 mm |
Stroke | 162 mm |
Eject Force | 265 N |
Housing Diameter | 22 mm |
Weight | 0.3 kg |
Length | 615 mm |
Placement on Vehicle | both sides |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.55 kg |
Number of Connectors / Ports | 4 |
Function | Thermostat, coolant |
Opening Temperature | 83 °C |
Type | Thermostat, coolant |
Additional Information | with gasket/seal |
Additional Information 2 | with Temperature Switch |
Housing Type | with housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Combi Switch Function | with hazard warning light function, with fog-lamp function, with rear fog light function, with light dimmer function |
Weight | 0.089 kg |
Function | Switch, headlight |
Type | Switch, headlight |
Control Type | Rotary Operation |
Switch | with dimmer switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Aluminium |
Steering arm type | Control Arm |
Paired article numbers | 12528 |
Placement on Vehicle | Front Axle Right, Lower |
Weight | 2.471 kg |
Function | Control/Trailing Arm, wheel suspension |
Additional Information | with lock nut |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with ball joint, without bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Belt Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Function | V-Ribbed Belt Set |
Length | 1205 mm |
Width of castor bearing surface | 25 mm |
Number of Ribs | 6 |
Weight | 0.723 kg |
Type | V-Ribbed Belt Set |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi V-Ribbed Belt (177984)
- 1x Febi Belt Tensioner, v-ribbed belt (180107)
Important compatibility info
Weight | 2.421 kg |
Placement on Vehicle | Front Axle Left, Lower, Rear |
Steering arm type | Control Arm |
Paired article numbers | 33209 |
Thread Type | with right-hand thread |
Material | Cast Steel |
Function | Control/Trailing Arm, wheel suspension |
Extra Description | ProKit |
External Thread Size | M14 x 1,5 |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with rubber mount, with ball joint |
Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (21441)
- 1x Febi Camber Correction Screw (21560)
Important compatibility info
Material | Sheet Steel |
Weight | 2.530 kg |
Type | Control/Trailing Arm, wheel suspension |
Steering arm type | Control Arm |
Placement on Vehicle | Lower, Rear Axle Left, Rear Axle Right |
Function | Control/Trailing Arm, wheel suspension |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with lift cylinder |
Extra Description | febi Plus |
Function | Washer Fluid Jet, headlight cleaning |
Type | Washer Fluid Jet, headlight cleaning |
Placement on Vehicle | Right |
Weight | 0.060 kg |
Paired article numbers | 175650 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Right |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Weight | 2.8 kg |
Material | Sheet Steel |
Steering arm type | Trailing Arm |
Paired article numbers | 180973 |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023