Proud to be a UK-based company
Contact us
Important compatibility info
| Min. Length | 535 mm |
| External Teeth, Wheel Side | 38 |
| Number of mounting bores | 6 |
| Wheel Sided Joint Diameter | 98 mm |
| Transmission-side joint diameter | 107.9 mm |
| Thread Size | M16x1,5 |
| Bolt Hole Circle Diameter | 94.2 mm |
| Additional Information 2 | with screw |
| Bore Diameter | 10.65 mm |
| Weight | 6.610 kg |
| Additional Information | with grease |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£60.18
Important compatibility info
| Material | Sheet Steel |
| Additional Information 2 | with bolts/screws |
| Cone Size | 19 mm |
| Weight | 3.803 kg |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Paired article numbers | 180521 |
| Placement on Vehicle | Front Axle Right |
| Steering arm type | Control Arm |
| Additional Information | with rubber mounts, with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£60.18
Important compatibility info
| Placement on Vehicle | Front Axle Right, Lower, Rear |
| Steering arm type | Control Arm |
| Paired article numbers | 33208 |
| Material | Cast Steel |
| Function | Control/Trailing Arm, wheel suspension |
| Weight | 2.421 kg |
| Extra Description | ProKit |
| External Thread Size | M14 x 1,5 |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with rubber mount, with ball joint |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (21442)
- 1x Febi Camber Correction Screw (21560)
£60.18
Important compatibility info
| Weight | 4.980 kg |
| Material | Sheet Steel |
| Paired article numbers | 36768 |
| Placement on Vehicle | Lower, Front Axle Left |
| Function | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with holder, with rubber mounts |
| Additional Information 2 | with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£60.18
Important compatibility info
| Paired article numbers | 43084 |
| Steering arm type | Control Arm |
| Material | Sheet Steel |
| Weight | 2.77 kg |
| Placement on Vehicle | Front Axle Left |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£60.18
Important compatibility info
| Weight | 3.780 kg |
| Placement on Vehicle | Rear Axle |
| Width | 59 mm |
| Outer diameter | 74 mm |
| Inner diameter | 30 mm |
| Bearing Type | Angular Ball Bearing |
| Type | Wheel Bearing Kit |
| Sealing lip material | NBR (nitrile butadiene rubber) |
| Function | Wheel Bearing Kit |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with ABS sensor ring |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£60.18
Important compatibility info
| Additional Information | with rubber mounts |
| Paired article numbers | 182086 |
| Weight | 3.582 kg |
| Steering arm type | Control Arm |
| Additional Information 2 | with ball joint |
| Material | Sheet Steel |
| Placement on Vehicle | Front Axle Right |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Cone Size | 18 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£60.18
Important compatibility info
| Weight | 0.87 kg |
| Number of Connectors / Ports | 4 |
| Mounting bores distance | 80 mm |
| Function | Brake Valve, parking brake |
| Type | Brake Valve, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£60.18
Important compatibility info
| Weight | 6.586 kg |
| External Teeth, Diff.Side | 34 |
| Function | Drive Shaft |
| Type | Drive Shaft |
| Transmission-side joint diameter | 81.5 mm |
| Min. Length | 604 mm |
| Wheel Sided Joint Diameter | 91 mm |
| External Teeth, Wheel Side | 30 |
| Placement on Vehicle | Front Axle Right |
| Thread Size | M24 x 1,5 |
| Additional Information 2 | with nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£60.18
Important compatibility info
| Replaces | 108642 |
| Rotor Style | Internally Vented |
| Rim Hole Number | 5 -Hole |
| Weight | 7.840 kg |
| Placement on Vehicle | Front Axle |
| Outer diameter | 299 mm |
| Thickness | 47.5 mm |
| Brake Disc Thickness | 25.5 mm |
| Minimum thickness | 23 mm |
| Bolt Hole Circle Diameter | 114.3 mm |
| Centering Diameter | 64 mm |
| Surface | Coated |
| Number of mounting bores | 4 |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£60.19
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right, Upper |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Function | Control/Trailing Arm, wheel suspension |
| Extra Description | ProKit |
| Weight | 0.600 kg |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (21305)
- 1x Febi Bolt, control arm (40645)
- 1x Febi Washer (40789)
- 1x Febi Nut (34653)
- 1x Febi Nut (40597)
£60.19
Important compatibility info
| Bearing/Mounting Type | Hydro Mount |
| Weight | 1.018 kg |
| Placement on Vehicle | Front, Centre |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£60.19
Important compatibility info
| Weight | 1.400 kg |
| Placement on Vehicle | Left Front |
| Colour | Green |
| Bearing/Mounting Type | Hydro Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
| for OE number | 56 84 645 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£60.19
Important compatibility info
| Weight | 1.700 kg |
| Placement on Vehicle | Left |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, automatic transmission |
| Function | Mounting, automatic transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£60.19
Important compatibility info
| Length | 134 mm |
| Function | Sensor, pneumatic suspension level |
| Internal Thread Size | M6 |
| Type | Sensor, pneumatic suspension level |
| Width | 66 mm |
| Thickness | 47 mm |
| Mounting points diameter | 9 mm |
| Number of Connectors / Ports | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£60.20
Important compatibility info
| Weight | 5.67 kg |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 300 mm |
| Thickness | 68.5 mm |
| Brake Disc Thickness | 12 mm |
| Bolt Hole Circle Diameter | 120 mm |
| Surface | Coated |
| Function | Brake Disc |
| Rotor Style | Solid |
| Rim Hole Number | 5 -Hole |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£60.22
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Cone Size | 18 mm |
| Material | Sheet Steel |
| Type | Control/Trailing Arm, wheel suspension |
| Weight | 3.864 kg |
| Placement on Vehicle | Front Axle Left, Lower |
| Steering arm type | Control Arm |
| Paired article numbers | 174744 |
| External Thread Size | M12 x 1,25 |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£60.23
Important compatibility info
| Type | Air Suspension Valve |
| Weight | 0.5 kg |
| Function | Air Suspension Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£60.23
Important compatibility info
| Width of castor bearing surface | 25.5 mm |
| Track rollers material | Plastic |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Operating Mode | Automatic |
| Outer diameter | 55 mm |
| Weight | 0.560 kg |
| Type | Belt Tensioner, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£60.24
Important compatibility info
| Weight | 0.172 kg |
| Surface | Rubberized |
| Width | 25 mm |
| Function | Timing Belt |
| Number of Teeth | 149 |
| Type | Timing Belt |
| Belt Material | HNBR (hydrogenated nitrile butadiene rubber) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£60.25
Important compatibility info
| Weight | 0.80 kg |
| Placement on Vehicle | Right Front |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
| Additional Information 2 | with splash protection cover |
| Paired article numbers | 184089 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£60.25
Important compatibility info
| Additional Information | with adjuster |
| Paired article numbers | 197179 |
| Extra Description | febi Plus |
| Function | Door Lock |
| Type | Door Lock |
| Weight | 0.5 kg |
| Number of Connectors / Ports | 5 |
| Placement on Vehicle | Right Rear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£60.26
Important compatibility info
| Weight | 0.114 kg |
| Length | 59 mm |
| Spanner Size | 27 |
| Number of Connectors / Ports | 3 |
| Function | Sensor, oil pressure |
| Screw length below head | 12 mm |
| for OE number | 51.27421.0263 |
| External Thread Size | M18 x 1,5 |
| Type | Sensor, oil pressure |
| Colour | Beige |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£60.26
Important compatibility info
| Weight | 0.04 kg |
| Fitting Depth | 30 mm |
| External Thread Size | M10 x 1,5 |
| Function | Glow Plug |
| Voltage | 11 V |
| Length | 160 mm |
| Spanner Size | 12 |
| Glow Plug Type | after-glow capable |
| Type | Glow Plug |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£60.28
Important compatibility info
| Additional Information 2 | with ball bearing |
| Material | Rubber/Metal |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Type | Repair Kit, suspension strut support mount |
| Function | Repair Kit, suspension strut support mount |
| Weight | 0.984 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension Strut Support Mount (182348)
- 1x Febi Rolling Bearing, suspension strut support mount (183629)
£60.28
Important compatibility info
| Function | Ring Gear, flywheel |
| Type | Ring Gear, flywheel |
| Weight | 2.010 kg |
| Number of Teeth | 138 |
| Outer diameter | 443 mm |
| Inner diameter | 412.5 mm |
| Width | 16.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£60.29
Important compatibility info
| Placement on Vehicle | Rear |
| Weight | 1.494 kg |
| for OE number | 21950-G3000 |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£60.32
Important compatibility info
| Weight | 1.035 kg |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£60.32
Important compatibility info
| Weight | 3.507 kg |
| Placement on Vehicle | Front Axle |
| Length | 125.5 mm |
| Width | 94.7 mm |
| Wear Warning Contact | prepared for wear warning indicator |
| Inspection Tag | ECE R90 Approved |
| Thickness/Strength 1 | 18.8 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£60.32
Important compatibility info
| Weight | 0.876 kg |
| Height | 110 mm |
| Width | 320 mm |
| Inner diameter | 65 mm |
| Function | Charge Air Hose |
| Type | Charge Air Hose |
| Additional Information 2 | with clamps |
| Placement on Vehicle | Charge Air Cooler, Left |
| Hose Length | 475 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£60.33
Important compatibility info
| Weight | 1.19 kg |
| Width | 25.4 mm |
| Number of Teeth | 153 |
| Function | Timing Belt Kit |
| Type | Timing Belt Kit |
| Belts | with rounded tooth profile |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt (11148)
- 1x Febi Tensioner Pulley, timing belt (04199)
- 1x Febi Deflection Pulley/Guide Pulley, timing belt (04195)
£60.34
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Additional Information 2 | with nut |
| Min. Length | 800 mm |
| Thread Size | M20x1,5 |
| External Teeth, Wheel Side | 21 |
| External Teeth, Diff.Side | 22 |
| Function | Drive Shaft |
| Wheel Sided Joint Diameter | 84 mm |
| Transmission-side joint diameter | 67.6 mm |
| Weight | 6.242 kg |
| Type | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£60.35
Important compatibility info
| Function | Brake Disc |
| Minimum thickness | 24.5 mm |
| Bolt Hole Circle Diameter | 110 mm |
| Surface | Coated |
| Rim Hole Number | 6 -Hole |
| Outer diameter | 290 mm |
| Thickness | 53 mm |
| Brake Disc Thickness | 26 mm |
| Weight | 7.4 kg |
| Placement on Vehicle | Front Axle |
| Type | Brake Disc Rotor |
| Rotor Style | Internally Vented |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£60.37
Important compatibility info
| Weight | 9.170 kg |
| Rotor Style | Internally Vented |
| Placement on Vehicle | Front Axle |
| Outer diameter | 305 mm |
| Thickness | 49.5 mm |
| Brake Disc Thickness | 28 mm |
| Minimum thickness | 24 mm |
| Bolt Hole Circle Diameter | 118 mm |
| Centering Diameter | 72 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Function | Brake Disc |
| Rim Hole Number | 5 -Hole |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£60.37
Important compatibility info
| Rotor Style | Internally Vented |
| Rim Hole Number | 5 -Hole |
| Weight | 7.7 kg |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 325 mm |
| Thickness | 59 mm |
| Brake Disc Thickness | 20 mm |
| Minimum thickness | 17 mm |
| Bolt Hole Circle Diameter | 120 mm |
| Centering Diameter | 79 mm |
| Surface | Coated |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£60.37
Important compatibility info
| Length | 310 mm |
| Width | 130 mm |
| Weight | 1.586 kg |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
| Placement on Vehicle | Rear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£60.38
Important compatibility info
| Outer diameter | 65 mm |
| Operating Mode | Automatic |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Metal |
| Width of castor bearing surface | 32 mm |
| Weight | 1.253 kg |
| Type | Belt Tensioner, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£60.39
Important compatibility info
| Weight | 0.99 kg |
| Type | Heat Exchanger, interior heating |
| Function | Heat Exchanger, interior heating |
| Core Length | 368 mm |
| Core Width | 173 mm |
| Core Depth | 32 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£60.39
Important compatibility info
| Placement on Vehicle | Front Axle |
| Outer diameter | 283 mm |
| Minimum thickness | 24 mm |
| Bolt Hole Circle Diameter | 108 mm |
| Thickness | 48 mm |
| Brake Disc Thickness | 26 mm |
| Number of mounting bores | 3 |
| Function | Brake Disc |
| Rim Hole Number | 5 -Hole |
| Weight | 6.7 kg |
| Centering Diameter | 71 mm |
| Surface | Coated |
| Rotor Style | Internally Vented |
| Type | Brake Disc Rotor |
| for OE number | 98 059 614 80 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£60.40
Important compatibility info
| Additional Information | with gasket/seal |
| Material | Cast Aluminium |
| Weight | 0.92 kg |
| Number of Wings | 6 |
| Type | Water Pump, engine cooling |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Metal |
| Seal Material | Metal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£60.40
Important compatibility info
| Placement on Vehicle | Right |
| Weight | 1.820 kg |
| for OE number | 11210-4BE0B |
| Bearing/Mounting Type | Hydro Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£60.40
Important compatibility info
| Function | Control Valve, camshaft adjustment |
| Number of Connectors / Ports | 2 |
| Length | 118 mm |
| Weight | 0.170 kg |
| Extra Description | febi Plus |
| Type | Control Valve, camshaft adjustment |
| Placement on Vehicle | Intake Side, Exhaust Side |
| Additional Information | with seal rings |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£60.41
Important compatibility info
| Weight | 1.447 kg |
| Type | Repair Kit, driver cab suspension |
| Function | Repair Kit, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£60.42
Important compatibility info
| Weight | 1.869 kg |
| Placement on Vehicle | Right |
| Bearing/Mounting Type | Hydro Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
| Additional Information 2 | with splash protection cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£60.42
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Outer diameter | 298 mm |
| Thickness | 59.1 mm |
| Brake Disc Thickness | 14.2 mm |
| Minimum thickness | 13 mm |
| Bolt Hole Circle Diameter | 127 mm |
| Centering Diameter | 101.6 mm |
| Surface | Coated |
| Number of mounting bores | 5 |
| Function | Brake Disc |
| Rim Hole Number | 5 -Hole |
| Rotor Style | Solid |
| Weight | 7.08 kg |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£60.42
Important compatibility info
| Weight | 2.02 kg |
| Length | 151 mm |
| Width | 160 mm |
| Thickness | 124.4 mm |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
| Placement on Vehicle | Right |
| for OE number | 1807 GJ |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£60.44
Important compatibility info
| Weight | 0.424 kg |
| Function | Solenoid valve, automatic transmission |
| Number of Connectors / Ports | 2 |
| Type | Solenoid valve, automatic transmission |
| Voltage | 24 V |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£60.44
Important compatibility info
| Weight | 3.55 kg |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Width | 95.5 mm |
| Outer diameter | 131 mm |
| Inner diameter | 50 mm |
| Number of Holes | 5 |
| Bolt Hole Circle Diameter | 112 mm |
| Bearing Type | Angular Ball Bearing |
| Function | Wheel Bearing Kit |
| Type | Wheel Bearing Kit |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with ABS sensor ring |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£60.44
Important compatibility info
| Placement on Vehicle | Lower, Front Axle Right, Rear |
| Additional Information | with rubber mounts |
| Material | Aluminium |
| Additional Information 2 | with ball joint |
| Steering arm type | Control Arm |
| Paired article numbers | 197268 |
| Weight | 1.9 kg |
| Cone Size | 19 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| External Thread Size | M16 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£60.46
Important compatibility info
| Material | Cast Aluminium |
| Number of Wings | 6 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Metal |
| Seal Material | Rubber/Metal |
| Weight | 1.109 kg |
| Additional Information | with gasket/seal |
| Type | Water Pump, engine cooling |
| for OE number | 642 200 10 01 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£60.47
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023