Important compatibility info
Additional Information | with lift cylinder |
Extra Description | febi Plus |
Function | Washer Fluid Jet, headlight cleaning |
Type | Washer Fluid Jet, headlight cleaning |
Placement on Vehicle | Right |
Weight | 0.060 kg |
Paired article numbers | 175650 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 245 mm |
Outer diameter | 165 mm |
Number of Coils | 5 |
Function | Suspension Spring |
Placement on Vehicle | Rear Axle |
Weight | 4.67 kg |
Wire Diameter | 20 mm |
Type | Suspension Spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with rubber mounts |
Weight | 2.8 kg |
Paired article numbers | 180967 |
Steering arm type | Trailing Arm |
Material | Sheet Steel |
Placement on Vehicle | Rear Axle Left |
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Belt Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Function | V-Ribbed Belt Set |
Length | 1205 mm |
Width of castor bearing surface | 25 mm |
Number of Ribs | 6 |
Weight | 0.723 kg |
Type | V-Ribbed Belt Set |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi V-Ribbed Belt (177984)
- 1x Febi Belt Tensioner, v-ribbed belt (180107)
Important compatibility info
Number of Connectors / Ports | 3 |
Weight | 0.284 kg |
for OE number | 12 13 1 748 018 |
Type | Ignition Coil |
Function | Ignition Coil |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 5.555 kg |
Pipe Diameter | 38 mm |
Function | Centre Rod Assembly |
Length | 763 mm |
Outer diameter | 38 mm |
Rod/Strut | Push Rod |
Cone Size | 28.6 mm |
Extra Description | ProKit |
Internal Thread Size | M30 x 1,5 RHT |
External Thread Size | M20 x 1,5 |
Type | Centre Rod Assembly |
Additional Information | with castellated nut and split pins |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Centre Rod Assembly |
Cone Size | 17.8 mm |
Weight | 3.201 kg |
Function | Centre Rod Assembly |
Placement on Vehicle | Front Axle, Centre |
Rod/Strut | Push Rod |
Driver Position | for right-hand drive vehicles |
External Thread Size | M12 x 1,25 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Right |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Weight | 2.8 kg |
Material | Sheet Steel |
Steering arm type | Trailing Arm |
Paired article numbers | 180973 |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Min. Length | 535 mm |
External Teeth, Wheel Side | 38 |
Number of mounting bores | 6 |
Wheel Sided Joint Diameter | 98 mm |
Transmission-side joint diameter | 107.9 mm |
Thread Size | M16x1,5 |
Bolt Hole Circle Diameter | 94.2 mm |
Additional Information 2 | with screw |
Bore Diameter | 10.65 mm |
Weight | 6.610 kg |
Additional Information | with grease |
Type | Drive Shaft |
Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Width of castor bearing surface | 26 mm |
Track rollers material | Plastic |
Housing material | Aluminium |
Function | Belt Tensioner, v-ribbed belt |
Operating Mode | Automatic |
Outer diameter | 55 mm |
Type | Belt Tensioner, v-ribbed belt |
Weight | 0.630 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Brake Disc Thickness | 40 mm |
Thickness | 54.5 mm |
Placement on Vehicle | Front Axle |
Minimum thickness | 37 mm |
Brake Disc Type | Internally Vented |
Inner diameter | 145 mm |
Outer diameter | 310 mm |
Bolt Hole Circle Diameter | 140 mm |
Centering Diameter | 114 mm |
Surface | Coated |
Weight | 13.650 kg |
Rim Hole Number | 6 -Hole |
Type | Brake Disc |
Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 6.586 kg |
External Teeth, Diff.Side | 34 |
Function | Drive Shaft |
Type | Drive Shaft |
Transmission-side joint diameter | 81.5 mm |
Min. Length | 604 mm |
Wheel Sided Joint Diameter | 91 mm |
External Teeth, Wheel Side | 30 |
Placement on Vehicle | Front Axle Right |
Thread Size | M24 x 1,5 |
Additional Information 2 | with nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.471 kg |
Placement on Vehicle | Front Axle Left, Lower |
Material | Aluminium |
Steering arm type | Control Arm |
Paired article numbers | 12529 |
Additional Information | with lock nut |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | without bearing, with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Silicone, EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Weight | 0.43 kg |
Type | Charge Air Hose |
Function | Charge Air Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Steering arm type | Control Arm |
Paired article numbers | 43082 |
Function | Control/Trailing Arm, wheel suspension |
Placement on Vehicle | Front Axle Right |
Material | Sheet Steel |
Weight | 2.72 kg |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.758 kg |
Housing material | Aluminium |
Additional Information 2 | with handle, with switch |
Height | 220 mm |
Width | 125 mm |
Additional Information | with holder |
Inspection Tag | EMC |
Rated Power | 22 W |
Light Design | LED |
Mounting Type | Fully assembled |
Cable Length | 280 mm |
Depth | 73 mm |
Voltage from | 12 V |
Light Distribution | Long-range illumination |
Voltage to | 36 V |
Protection Type (IP Code) | IP6K9K |
Fulfils ECE norm | R10 |
Lumen | 2160 lm |
Temperature range from | -30 °C |
Temperature range to | 50 °C |
Function | Worklight |
Extra Description | ProKit |
Type | Worklight |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.86 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Length | 252 mm |
Additional Information | with counter nut |
Function | Inner Tie Rod |
Extra Description | ProKit |
Type | Inner Tie Rod |
External Thread Size | M18 x 1,5 |
Internal Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Front Axle Right |
Width | 93.5 mm |
Outer diameter | 142 mm |
Additional Information 2 | without wheel bearing |
Bolt Hole Circle Diameter | 114 mm |
Weight | 1.781 kg |
Type | Wheel Hub |
Function | Wheel Hub |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Aluminium |
Steering arm type | Control Arm |
Paired article numbers | 12528 |
Placement on Vehicle | Front Axle Right, Lower |
Weight | 2.471 kg |
Function | Control/Trailing Arm, wheel suspension |
Additional Information | with lock nut |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with ball joint, without bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.218 kg |
Function | Auxiliary water pump (cooling water circuit) |
Type | Auxiliary water pump (cooling water circuit) |
Number of Connectors / Ports | 3 |
Voltage | 12 V |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Quality/ Grade | 12.9 |
Function | Anti-Rotation Actuator, manual transmission |
Number of Connectors / Ports | 1 |
Length | 147 mm |
Internal Thread Size | M16 x 1,5 |
Weight | 0.785 kg |
Type | Anti-Rotation Actuator, manual transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Control/Trailing Arm, wheel suspension |
Steering arm type | Control Arm |
Paired article numbers | 42108 |
Weight | 3.93 kg |
Material | Steel |
Placement on Vehicle | Front Axle Left |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Ball Joint |
Weight | 2.01 kg |
Additional Information 2 | with crown nut |
Function | Ball Joint |
External Thread Size | M20 x 1,5 |
Placement on Vehicle | Front Axle Left, Upper, Front Axle Right |
Steering arm type | for control arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Right |
Material | Steel |
Steering arm type | Control Arm |
Paired article numbers | 42107 |
Function | Control/Trailing Arm, wheel suspension |
Weight | 3.83 kg |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left |
Type | Drive Shaft |
Function | Drive Shaft |
Transmission-side joint diameter | 108 mm |
Wheel Sided Joint Diameter | 98 mm |
Min. Length | 645 mm |
Number of mounting bores | 6 |
Weight | 7.048 kg |
External Teeth, Wheel Side | 38 |
Additional Information 2 | with nut |
Thread Size | M20x1,5 |
Bolt Hole Circle Diameter | 94 mm |
Paired article numbers | 181255 |
Bore Diameter | 10.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.37 kg |
Placement on Vehicle | Left, Lower, Front, Front Axle |
Material | Aluminium |
Steering arm type | Control Arm |
Paired article numbers | 106560 |
Function | Control/Trailing Arm, wheel suspension |
Additional Information 2 | without ball joint |
Type | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.303 kg |
Placement on Vehicle | Right |
Hose Length | 470 mm |
Type | Hose, crankcase ventilation |
Inner diameter 2 | 14 mm |
Inner diameter 1 | 12 mm |
Height | 80 mm |
Width | 180 mm |
Function | Hose, crankcase ventilation |
Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.967 kg |
Type | Dryer, air conditioning |
Function | Dryer, air conditioning |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Internal Thread Size | 3 x M22 x 1,5, M16 x 1,5 |
Weight | 0.372 kg |
Mounting bores distance | 63 mm |
Function | Relay Valve |
Type | Relay Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 5.15 kg |
Placement on Vehicle | Rear Axle |
Width | 44.4 mm |
Outer diameter | 211.8 mm |
Thickness | 80.7 mm |
Inner diameter | 180 mm |
Bolt Hole Circle Diameter | 108 mm |
Centering Diameter | 51.9 mm |
Max.skimmed drum measure | 181.25 mm |
Function | Brake Drum |
Rim Hole Number | 4 -Hole |
Type | Brake Drum |
Additional Information 2 | without wheel bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023