Proud to be a UK-based company
Contact us
Important compatibility info
| Pulleys | with belt pulley |
| Weight | 1.140 kg |
| Number of Wings | 5 |
| Type | Water Pump, engine cooling |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Metal |
| Seal Material | Rubber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.16
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Width | 75 mm |
| Outer diameter | 142 mm |
| Additional Information 2 | without wheel bearing |
| Inner diameter | 30 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Weight | 1.486 kg |
| Type | Wheel Hub |
| Function | Wheel Hub |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.16
Important compatibility info
| Function | Piston, air compressor |
| Outer diameter | 60 mm |
| Type | Piston, air compressor |
| Weight | 0.21 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.16
Important compatibility info
| Weight | 0.9 kg |
| Width of castor bearing surface | 33 mm |
| Outer diameter | 75 mm |
| Function | Deflection/Guide Pulley, v-ribbed belt |
| Type | Deflection/Guide Pulley, v-ribbed belt |
| Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.17
Important compatibility info
| Function | Cable Pull, manual transmission |
| Type | Cable Pull, manual transmission |
| Weight | 0.984 kg |
| Inner length 2 | 879 mm |
| Inner length 1 | 855 mm |
| Outer length 1 | 1160 mm |
| Outer length 2 | 1202 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.17
Important compatibility info
| Material | Metal |
| Outer diameter | 70 mm |
| Inner diameter | 14 mm |
| Width | 52 mm |
| Type | Deflection/Guide Pulley, v-ribbed belt |
| Mounting points diameter | 10 mm |
| Weight | 0.497 kg |
| Function | Deflection/Guide Pulley, v-ribbed belt |
| Width of castor bearing surface | 29 mm |
| Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.17
Important compatibility info
| Weight | 4.7 kg |
| Placement on Vehicle | Front Axle Right, Lower |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 42433 |
| Cone Size | 18 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Internal Thread Size | M12 x 1,25 |
| Type | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.17
Important compatibility info
| Number of Chain Links | 106 |
| Timing Chain Size | D67ZN |
| Chain Type | Duplex, with chain lock |
| Type | Timing Chain Kit |
| Function | Timing Chain Kit |
| for OE number | 102 050 10 11 S5 |
| Extra Description | Basic Short Kit |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (09231)
- 1x Febi Tensioner, timing chain (01050)
£61.17
Important compatibility info
| Weight | 0.08 kg |
| Operating Mode | Electric |
| Number of Connectors / Ports | 2 |
| Function | Pressure Converter |
| Extra Description | febi Plus |
| Type | Pressure Converter |
| for OE number | 46813570 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.17
Important compatibility info
| Function | Window Regulator |
| Paired article numbers | 176632 |
| Operating Mode | Electric |
| Additional Information | without electric motor |
| Type | Window Regulator |
| Weight | 0.54 kg |
| Placement on Vehicle | Left Rear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.17
Important compatibility info
| Internal Thread Size | M12 x 1,25 |
| Weight | 4.68 kg |
| Placement on Vehicle | Front Axle Left, Lower |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 42432 |
| Cone Size | 18 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.17
Important compatibility info
| Thread Size | M22x1,5 |
| Additional Information 2 | with nut |
| Placement on Vehicle | Front Axle Left |
| Transmission-side joint diameter | 81.5 mm |
| Function | Drive Shaft |
| Type | Drive Shaft |
| Wheel Sided Joint Diameter | 82.0 mm |
| Min. Length | 595 mm |
| External Teeth, Diff.Side | 34 |
| External Teeth, Wheel Side | 26 |
| Weight | 5.744 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.17
Important compatibility info
| Weight | 0.353 kg |
| Extra Description | Basic Short Kit |
| Additional Information 2 | Requires special tools for mounting |
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 58 |
| Type | Chain Kit, oil pump drive |
| Function | Chain Kit, oil pump drive |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Chain, oil pump drive (31115)
- 1x Febi Chain Tensioner, oil pump drive (184003)
- 1x Febi Rail, oil pump drive chain (184004)
- 1x Febi Rail, oil pump drive chain (183482)
£61.17
Important compatibility info
| Weight | 0.178 kg |
| Type | Control Valve, camshaft adjustment |
| Function | Control Valve, camshaft adjustment |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.17
Important compatibility info
| Hole Spacing | 340 mm |
| Type | Link/Coupling Rod, stabiliser bar |
| Placement on Vehicle | Rear Axle, Rear Axle Left, Rear Axle Right |
| Function | Link/Coupling Rod, stabiliser bar |
| Length | 340 mm |
| Diameter | 125 mm |
| Thickness | 35 mm |
| Rod/Strut | Coupling Rod |
| Bore Diameter | 75 mm |
| Weight | 4.300 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.17
Important compatibility info
| Function | EGR Valve |
| Weight | 0.532 kg |
| for OE number | 11 71 7 804 378 |
| Type | EGR Valve |
| Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.17
Important compatibility info
| Outer diameter | 155 mm |
| Type | Belt Pulley, water pump |
| Inner diameter | 30 mm |
| Weight | 1.056 kg |
| Function | Belt Pulley, water pump |
| Width | 42 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.17
Important compatibility info
| Placement on Vehicle | Rear |
| Operating Mode | Mechanical |
| Paired article numbers | 24420 |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Pipe Diameter | 84 mm. 38 mm |
| Mounting points diameter | 12 mm |
| Function | Shock Absorber, driver cab suspension |
| Weight | 2.678 kg |
| Piston conrod diameter | 13 mm |
| Min. Length | 268 mm |
| Type | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.17
Important compatibility info
| Function | Window Regulator |
| Type | Window Regulator |
| Weight | 0.670 kg |
| Paired article numbers | 176413 |
| Operating Mode | Electric |
| Additional Information | without electric motor |
| Placement on Vehicle | Right Front |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.17
Important compatibility info
| Weight | 0.294 kg |
| Chain Type | Duplex, Closed chain |
| Number of Chain Links | 102 |
| Timing Chain Size | D67ZN |
| Function | Timing Chain |
| Additional Information 2 | Requires special tools for mounting |
| Type | Timing Chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.17
Important compatibility info
| External Thread Size | M12 x 1,5 |
| Weight | 2.83 kg |
| Placement on Vehicle | Front Axle |
| Cone Size | 17.5 mm |
| Pipe Diameter | 22 mm |
| Type | Tie Rod |
| Function | Tie Rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.17
Important compatibility info
| Width | 38.5 mm |
| Outer diameter | 150 mm |
| Inner diameter | 85 mm |
| Weight | 2.616 kg |
| Bearing Type | Tapered Roller Bearing |
| Type | Wheel Bearing |
| Function | Wheel Bearing |
| Placement on Vehicle | Rear Axle, inner |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.17
Important compatibility info
| Weight | 1.93 kg |
| Placement on Vehicle | Front Axle Left, Lower, Front |
| Material | Aluminium |
| Steering arm type | Control Arm |
| Paired article numbers | 107473 |
| Cone Size | 16 mm |
| Function | Control/Trailing Arm, wheel suspension |
| External Thread Size | M16 x 1,5 |
| Additional Information | with lock nut |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with bearing, with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.17
Important compatibility info
| Rotor Style | perforated/vented |
| Placement on Vehicle | Front Axle Left |
| Thickness | 69 mm |
| Brake Disc Thickness | 28 mm |
| Minimum thickness | 26 mm |
| Bolt Hole Circle Diameter | 130 mm |
| Centering Diameter | 98 mm |
| Paired article numbers | 108336 |
| Surface | Coated |
| Number of mounting bores | 2 |
| Machining | High-carbon |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
| Rim Hole Number | 5 -Hole |
| Weight | 9.12 kg |
| Outer diameter | 330 mm |
Additional Information
Technical Information
Attention, this is a sided brake disc.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.17
Important compatibility info
| Opening Temperature | 86 °C |
| Function | Thermostat, coolant |
| Weight | 0.340 kg |
| Type | Thermostat, coolant |
| Additional Information 2 | with seal ring |
| for OE number | 22820752 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.17
Important compatibility info
| Outer diameter | 127 mm |
| Thickness | 25 mm |
| Inner diameter | 30 mm |
| Number of Ribs | 5 |
| Parameter | 6PK |
| Function | Belt Pulley, crankshaft |
| Weight | 1.55 kg |
| Type | Belt Pulley, crankshaft |
| for OE number | 0515.H6 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.17
Important compatibility info
| Additional Information 2 | with screw |
| Width | 29 mm |
| Outer diameter | 153 mm |
| Inner diameter | 30 mm |
| Number of Ribs | 5 |
| Parameter | 6PK |
| Function | Belt Pulley, crankshaft |
| Extra Description | ProKit |
| Type | Belt Pulley, crankshaft |
| Weight | 2.44 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Belt Pulley, crankshaft (27722)
- 1x Febi Pulley Bolt (33675)
£61.17
Important compatibility info
| Weight | 1.180 kg |
| Material | Cast Aluminium |
| Number of Wings | 6 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Plastic |
| Seal Material | Rubber |
| Additional Information | with gasket/seal |
| Type | Water Pump, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.17
Important compatibility info
| Mounting points diameter | 14 mm. 25 mm |
| Function | Shock Absorber, driver cab suspension |
| Max. Length | 346 mm |
| Min. Length | 252 mm |
| Weight | 3.6 kg |
| Placement on Vehicle | Front |
| Pipe Diameter | 63 mm. 38 mm |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Operating Mode | Mechanical |
| Type | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.17
Important compatibility info
| External Thread Size | M20 x 1,5 |
| Function | Link/Coupling Rod, stabiliser bar |
| Type | Link/Coupling Rod, stabiliser bar |
| Pipe Diameter | 36 mm |
| Weight | 3.500 kg |
| Rod/Strut | Coupling Rod |
| Additional Information 2 | with crown nut |
| Diameter | 36 mm |
| Length | 284 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Extra Description | ProKit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.17
Important compatibility info
| External Thread Size | M16 x 1,5 |
| Weight | 1.93 kg |
| Placement on Vehicle | Front Axle Right, Lower, Front |
| Material | Aluminium |
| Steering arm type | Control Arm |
| Paired article numbers | 107472 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with bearing, with ball joint |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.17
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Width | 62 mm |
| Outer diameter | 78 mm |
| Inner diameter | 30 mm |
| Bearing Type | Angular Ball Bearing |
| Type | Wheel Bearing Kit |
| Function | Wheel Bearing Kit |
| Weight | 3.620 kg |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with ABS sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.17
Important compatibility info
| Weight | 1.21 kg |
| Placement on Vehicle | Left Front |
| Operating Mode | Electric |
| Paired article numbers | 26911 |
| Function | Window Regulator |
| Type | Window Regulator |
| Additional Information | with fastening/mounting material, without electric motor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.17
Important compatibility info
| Min. Length | 598 mm |
| External Teeth, Diff.Side | 22 |
| Placement on Vehicle | Front Axle Right |
| Additional Information 2 | with nut |
| Thread Size | M24x1,5 |
| External Teeth, Wheel Side | 30 |
| Weight | 6.744 kg |
| Wheel Sided Joint Diameter | 88.9 mm |
| Transmission-side joint diameter | 93.9 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.17
Important compatibility info
| Length | 1220 mm |
| Number of Ribs | 6 |
| Weight | 0.738 kg |
| Type | V-Ribbed Belt Set |
| Function | V-Ribbed Belt Set |
| Belt Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Tensile Cord Material | Polyester |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi V-Ribbed Belt (38424)
- 1x Febi Belt Tensioner, v-ribbed belt (180107)
£61.17
Important compatibility info
| Width of castor bearing surface | 46 mm |
| Width | 72 mm |
| Material | Metal |
| Outer diameter | 75 mm |
| Inner diameter | 12 mm |
| Mounting points diameter | 12 mm |
| Function | Deflection/Guide Pulley, v-ribbed belt |
| Type | Deflection/Guide Pulley, v-ribbed belt |
| Weight | 1.441 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.17
Important compatibility info
| Function | Sensor, exhaust gas temperature |
| Weight | 0.07 kg |
| Type | Sensor, exhaust gas temperature |
| for OE number | 03L 906 088 CH |
| Placement on Vehicle | after soot particulate filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.17
Important compatibility info
| Weight | 1.634 kg |
| Additional Information | with gasket/seal |
| Material | Cast Aluminium |
| Number of Wings | 6 |
| Type | Water Pump, engine cooling |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Plastic |
| Seal Material | Rubber/Metal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.17
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Outer diameter | 330 mm |
| Thickness | 69 mm |
| Brake Disc Thickness | 28 mm |
| Minimum thickness | 26 mm |
| Bolt Hole Circle Diameter | 130 mm |
| Centering Diameter | 98 mm |
| Paired article numbers | 108215 |
| Surface | Coated |
| Number of mounting bores | 2 |
| Machining | High-carbon |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
| Rotor Style | perforated/vented |
| Weight | 9.12 kg |
| Rim Hole Number | 5 -Hole |
Additional Information
Technical Information
Attention, this is a sided brake disc.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.17
Important compatibility info
| Weight | 4.089 kg |
| Function | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
| Placement on Vehicle | Front Axle Left, Lower, Rear |
| Additional Information | with nuts, with fastening/mounting material |
| Paired article numbers | 40366 |
| Material | Cast Steel |
| Extra Description | ProKit |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint, with bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (30255)
- 1x Febi Nut (06877)
- 1x Febi Camber Correction Screw (21560)
- 1x Febi Nut (21557)
£61.17
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Weight | 4.089 kg |
| Paired article numbers | 40365 |
| Steering arm type | Control Arm |
| Material | Cast Steel |
| Placement on Vehicle | Front Axle Right, Lower, Rear |
| Extra Description | ProKit |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with bearing, with ball joint |
| Additional Information | with nuts, with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (30256)
- 1x Febi Nut (06877)
- 1x Febi Camber Correction Screw (21560)
- 1x Febi Nut (21557)
£61.17
Important compatibility info
| Placement on Vehicle | Front Axle |
| Cone Size | 30 mm |
| Pipe Diameter | 48 mm |
| Function | Centre Rod Assembly |
| Length | 1040 mm |
| Outer diameter | 48 mm |
| Rod/Strut | Push Rod |
| Weight | 8.210 kg |
| Extra Description | ProKit |
| Internal Thread Size | M30 x 1,5 RHT |
| External Thread Size | M24 x 1,5 |
| Type | Centre Rod Assembly |
| Additional Information | with castellated nut and split pins |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.17
Important compatibility info
| Type | Alternator Freewheel Clutch |
| Weight | 0.638 kg |
| Number of Ribs | 6 |
| Function | Alternator Freewheel Clutch |
| Width | 56 mm |
| Outer diameter | 58 mm |
| Inner diameter | 17 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.17
Important compatibility info
| Placement on Vehicle | both sides |
| Length | 515 mm |
| Housing length | 314.5 mm |
| Function | Gas Spring, boot/cargo area |
| Type | Gas Spring, boot/cargo area |
| Piston conrod diameter | 8 mm |
| Mounting points diameter | 18 mm |
| Stroke | 157 mm |
| Eject Force | 710 N |
| Housing Diameter | 22 mm |
| Weight | 0.3 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.17
Important compatibility info
| Outer diameter | 158 mm |
| Inner diameter | 30 mm |
| Weight | 1.96 kg |
| Additional Information 2 | with screw |
| Width | 37 mm |
| Number of Ribs | 5 |
| Spanner Size | 22 |
| Parameter | 6PK |
| Outer diameter 2 | 153 mm |
| Function | Belt Pulley, crankshaft |
| Extra Description | ProKit |
| External Thread Size | M14 x 1,5 |
| Type | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Belt Pulley, crankshaft (47154)
- 1x Febi Pulley Bolt (33675)
£61.17
Important compatibility info
| Weight | 4.310 kg |
| Steering arm type | Control Arm |
| Placement on Vehicle | Front Axle Right |
| Material | Cast Steel |
| Paired article numbers | 26645 |
| Mounting points diameter | 12 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with holders, with rubber mounts |
| Additional Information 2 | with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.17
Important compatibility info
| Length | 178 mm |
| Height | 59 mm |
| Width | 125 mm |
| Number of Ribs | 10 |
| Function | Oil Cooler, engine oil |
| Additional Information | with gasket/seal |
| Weight | 1.22 kg |
| Type | Oil Cooler, engine oil |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.17
Important compatibility info
| Parameter | 7 PK |
| Type | Belt Pulley, crankshaft |
| Width | 30 mm |
| Outer diameter | 163 mm |
| Inner diameter | 38 mm |
| Weight | 1.495 kg |
| Function | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.17
Important compatibility info
| Material | Metal |
| Operating Mode | Automatic |
| Weight | 0.206 kg |
| Type | Vibration Damper, v-ribbed belt |
| Function | Vibration Damper, V-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.17
Important compatibility info
| Placement on Vehicle | Lower, Front Axle Right |
| Material | Sheet Steel |
| Paired article numbers | 36767 |
| Function | Control/Trailing Arm, wheel suspension |
| Weight | 4.980 kg |
| Steering arm type | Control Arm |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with rubber mounts, with holder |
| Additional Information 2 | with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.17
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023