Proud to be a UK-based company
Contact us
Important compatibility info
| Weight | 6.08 kg |
| Rotor Style | Internally Vented |
| Rim Hole Number | 5 -Hole |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 300 mm |
| Thickness | 35.9 mm |
| Brake Disc Thickness | 22 mm |
| Minimum thickness | 20 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Centering Diameter | 68 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Function | Brake Disc |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£63.41
Important compatibility info
| Additional Information | with gasket/seal |
| Weight | 0.95 kg |
| Function | Brake Master Cylinder |
| Type | Brake Master Cylinder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£63.45
Important compatibility info
| Weight | 1.75 kg |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Width | 82 mm |
| Outer diameter | 120 mm |
| Inner diameter | 24 mm |
| Number of Holes | 5 |
| Bolt Hole Circle Diameter | 100 mm |
| Bearing Type | Angular Ball Bearing |
| Function | Wheel Bearing Kit |
| Type | Wheel Bearing Kit |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with ABS sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£63.45
Important compatibility info
| Cone Size | 18 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Weight | 3.864 kg |
| Steering arm type | Control Arm |
| Placement on Vehicle | Front Axle Right, Lower |
| Material | Sheet Steel |
| Additional Information 2 | with ball joint |
| Paired article numbers | 174743 |
| Additional Information | with rubber mounts, with crown nut and split pin |
| External Thread Size | M12 x 1,25 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£63.46
Important compatibility info
| Function | Brake Disc |
| Type | Brake Disc Rotor |
| Number of mounting bores | 1 |
| for OE number | 910 423 02 00 07 |
| Surface | Coated |
| Weight | 8.0 kg |
| Centering Diameter | 85 mm |
| Bolt Hole Circle Diameter | 130 mm |
| Minimum thickness | 16 mm |
| Brake Disc Thickness | 18 mm |
| Thickness | 71 mm |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 298 mm |
| Rotor Style | Solid |
| Rim Hole Number | 6 -Hole |
| Vehicle Equipment | for vehicles without electric parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£63.46
Important compatibility info
| Spanner Size | 22 |
| Weight | 0.124 kg |
| Cable Length | 1031 mm |
| Number of circuits | 3 |
| Lambda Sensor | Heated, Regulating Sensor |
| Type | Oxygen Sensor |
| Function | Oxygen Sensor |
| External Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£63.47
Important compatibility info
| Rim Hole Number | 5 -Hole |
| Weight | 6.7 kg |
| Rotor Style | Internally Vented |
| Brake Disc Thickness | 24 mm |
| Placement on Vehicle | Front Axle |
| Outer diameter | 298 mm |
| Thickness | 67 mm |
| Minimum thickness | 22 mm |
| Bolt Hole Circle Diameter | 130 mm |
| Centering Diameter | 98 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Function | Brake Disc |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£63.48
Important compatibility info
| Weight | 0.768 kg |
| Outer diameter | 80 mm |
| Number of Ribs | 5 |
| Operating Mode | Automatic |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Plastic |
| Width of castor bearing surface | 20 mm |
| Type | Belt Tensioner, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Deflection/Guide Pulley, v-ribbed belt (17074)
- 1x Febi Bolt, tensioner pulley (23768)
- 1x Febi Screw (24244)
£63.49
Important compatibility info
| Chain Type | Duplex |
| Function | Guide Rails Kit, timing chain |
| Weight | 0.559 kg |
| Type | Guide Rails Kit, timing chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£63.50
Important compatibility info
| Housing length | 152 mm |
| Mounting points diameter | 10 mm |
| Length | 253 mm |
| Eject Force | 1900 N |
| Stroke | 67 mm |
| Housing Diameter | 35 mm |
| Piston conrod diameter | 10 mm |
| Function | Gas Spring, boot/cargo area |
| Type | Gas Spring, boot/cargo area |
| Weight | 0.622 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£63.52
Important compatibility info
| Weight | 1.217 kg |
| Extra Description | ProKit |
| Outer diameter | 150 mm |
| Thickness | 35 mm |
| Bolt Hole Circle Diameter | 110 mm |
| Type | Joint, propshaft |
| Function | Joint, propshaft |
| Number of Holes | 6 |
| Additional Information 2 | with bolts/screws, with washers |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Joint, propshaft (101779)
- 3x Febi Screw (109456)
- 3x Febi Screw (109454)
- 3x Febi Washer (19107)
- 6x Febi Nut (19104)
£63.52
Important compatibility info
| Type | Brake Caliper |
| Placement on Vehicle | Front Axle Left |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 178823 |
| Weight | 3.736 kg |
| Function | Brake Caliper |
| Brake caliper piston diameter | 57 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£63.53
Important compatibility info
| Weight | 1.08 kg |
| Placement on Vehicle | Intake Side |
| Paired article numbers | 104242 |
| Function | Camshaft Adjuster |
| Extra Description | febi Plus |
| Type | Camshaft Adjuster |
| Additional Information 2 | without screw |
| Number of Teeth | 38 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£63.54
Important compatibility info
| Rim Hole Number | 5 -Hole |
| Rotor Style | Internally Vented |
| Weight | 15.05 kg |
| Placement on Vehicle | Front Axle |
| Outer diameter | 380 mm |
| Thickness | 81 mm |
| Brake Disc Thickness | 34 mm |
| Minimum thickness | 31 mm |
| Bolt Hole Circle Diameter | 120 mm |
| Centering Diameter | 79 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£63.56
Important compatibility info
| Rotor Style | Internally Vented |
| Rim Hole Number | 4 -Hole |
| Placement on Vehicle | Front Axle |
| Outer diameter | 280 mm |
| Thickness | 56.3 mm |
| Brake Disc Thickness | 22 mm |
| Minimum thickness | 20 mm |
| Bolt Hole Circle Diameter | 108 mm |
| Centering Diameter | 68 mm |
| Surface | Coated |
| Function | Brake Disc |
| Weight | 5.765 kg |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£63.57
Important compatibility info
| Spanner Size | 22 |
| Weight | 0.112 kg |
| Cable Length | 620 mm |
| Number of circuits | 4 |
| Lambda Sensor | Heated |
| Type | Oxygen Sensor |
| Function | Oxygen Sensor |
| External Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£63.60
Important compatibility info
| Placement on Vehicle | Right |
| Material | Rubber/Metal |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Weight | 1.97 kg |
| Type | Mounting, engine |
| for OE number | 11 21 000 20R |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£63.61
Important compatibility info
| Rim Hole Number | 4 -Hole |
| Weight | 8.94 kg |
| Rotor Style | Internally Vented |
| Placement on Vehicle | Front Axle |
| Outer diameter | 323 mm |
| Thickness | 34.2 mm |
| Brake Disc Thickness | 28 mm |
| Minimum thickness | 26 mm |
| Bolt Hole Circle Diameter | 108 mm |
| Centering Diameter | 66 mm |
| Surface | Coated |
| Number of mounting bores | 2 |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£63.64
Important compatibility info
| Transmission-side joint diameter | 79 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
| Weight | 6.376 kg |
| Placement on Vehicle | Front Axle Left |
| Additional Information 2 | with nut |
| External Teeth, Diff.Side | 20 |
| Min. Length | 650 mm |
| ABS Ring Diameter | 80 mm |
| Wheel Sided Joint Diameter | 83 mm |
| Thread Size | M22x1,5 |
| External Teeth, Wheel Side | 26 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£63.65
Important compatibility info
| Material | Metal |
| Outer diameter | 132 mm |
| Number of Ribs | 6 |
| Function | Deflection/Guide Pulley, v-ribbed belt |
| Weight | 1.18 kg |
| Width of castor bearing surface | 28 mm |
| Type | Deflection/Guide Pulley, v-ribbed belt |
| Additional Information | with holder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£63.66
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023